Best Brushless Power Metal Cutting Chop Saws in 2026

Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops

The mitre saw has a precise miter system and machined base fence support

Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw

Powerful 15-amp motor delivers 5 300-RPM for greater speed and faster cuts

7-1 4-inch carbide-tipped blade included. Spindle lock for easy blade changes.

51° bevel capacity with a positive stop at 45° for a wide variety of cuts

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade

XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered

Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated

Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops

The mitre saw has a precise miter system and machined base fence support

Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically

Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility

Capacity to cup 3 5/8 in. nested crown and 3 1/2 in. base vertically

Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment

CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup.

CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch

15 Amp, 3,800 Rpm Motor With Replaceable Brushes Provides Power And Durability For The Chop Saw

Quick-Release Material Clamp Of The Metal Chop Saw Allows For Easy Material Cutting And Removal

Cutting Fence With Miter Adjustment Of The Metal Cutting Saw Allows Up To 45 Degree Angles To Be Cut

Designed to cut a wide range of materials without changing blades

Clean, consistent and smooth cutting with Left and Right 0° – 45° bevel tilt and 50-50 miter angles

Compatible with Evolutions Miter Saw Stand (EVOMS1)

Includes 8” saw, hex blade wrench, circular saw blade, and carrying case

Overall length: 6-1/2”

Overall weight: 13.3 lbs

Powerful 15 amp/5.5 HP (maximum motor HP) motor of the chop saw provides more overload capacity, increasing performance and durability

QUIK-CHANGE keyless blade change system of the metal chop saw increases productivity by providing the user the ability to change wheels without a wrench

Exclusive QUICK-FENCE of the metal cutting saw is a 45-degree, adjustable fence designed for fast and accurate angle cuts without using a wrench

Carbide-tipped blade lasts 50x longer than abrasive wheels; cuts clean, accurate and virtually burr-free

Quick release vise for secure material retention and fast, repeated cut-offs

Lock-off button for user convenience

Powerful 15 AMP motor delivers 3,800 RPM for superior performance and durability

Adjustable spark guard designed to divert sparks

Two-stage lock-off power button for operator convenience

3-in-1 tool for plunge cutting, flush cutting and surface preparation applications including rust, paint and thinset removal

Kit includes 4” US500 premium Swiss-made Carbide cutting Wheel for wood and plastic cutting applications

Kit includes 3.5” US510 metal cutoff wheel ideal for cutting abrasive materials such as copper pipe, conduit, coated wire shelving, thin sheet metal, threaded rod, sheet aluminum and more

3" Cutting disc, compact for one hand operation.

Includes 3 cutting discs and 1 grinding disc

19000 RPM

APPLICATION: This saber saw, or also known as mini reciprocating saw, is a powered reciprocating saw and is hand-held, yet larger than a jigsaw, that uses a toothed blade to cut through soft materials and/or wood.

DESIGN: This air saw tool is designed for high-speed metal cutting requirements with body and sheet metal and is an ideal pnumatic tool for body shop repair, muffler and exhaust work at the home or garage.

QUALITY: The body of this unit is constructed with aircraft grade aluminum with an adjustable blade guide that increases blade life, accuracy and efficiency, and the rubber soft grip provides a firm hold for comfortable use.

Powerful 15-amp motor crosscuts boards up to 13.25 inches wide and 4.5 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel or miter up to 45 degrees in either direction (featuring 9 miter stops)

CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.

SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°

CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.

No gas, emissions, oil mixing or pull starts

Makita-built Outer Rotor BL Brushless Motor direct-drive system provides high power efficiency equivalent to a 32cc gas chain saw

Tool-less chain adjustment for convenient operation and maintenance

D-shape handle for easy gripping

Lock-off button for user convenience

Fence adjusts 45° right and left; 3 locations for various material sizes

For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood

Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned

Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals

Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!

Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile!

Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the integrated laser guide!

🛍️【Powerful Motor & 3 Saw Blades】Powerful 6.2Amps copper motor delivers full-size performance at 3,500 RPM high cutting speed, you can use HYCHIKA circualr saw to cut wood, plastic, gypsum board, PVC pipes and ceramic tiles. 3 Blades included: 1x24T TCT blades for wood cuts, 1x60T HSS blades for plastic and soft-metal cuts, 1pcs grit diamond blades for tile cuts, extending the applications of the compact circular saw.

🛍️【Precise Scale Ruler and Dust Collection】- Equipped with a scale to ensure precise straightness. Greatly improves your work efficiency and cutting performance. The built-in dust collection port and included vacuum adapter allow connection to a shop vacuum or dust collection system, helping you to maintain a cleaner working environment.

🛍️【0-45° Bevel Cutting & Depth Guide】The HYCHIKA compact circular saw allows you to change your cutting angle freely from 0° to 45°(50° max). Equipped with adjustable cutting depth, the max cutting depth of 1-7/8" at 90°and 1-1/4" at 45° can meet your versatile needs. Easy-set depth gauge lever for adjustable cutting depth from 0-32mm(1’’).

CIRC SAW 14" METAL DEVIL BOX

Cuts faster: M.K. Morse Metal Devil cutting system cuts much faster than traditional abrasive wheels. It can cut through 6 inches x ¼ inch thick steel in approximately 12 seconds.

M.K. Morse Metal Devil cutting systems offer exceptional wear resistance and make more cuts than most other cutting systems.

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, Carbon and Aluminum arrow shafts, and mini model making

High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel- no sanding required!

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, arrow shafts, and mini model making

WIDELY APPLICABLE - BEAMNOVA Electric Power Miter cuts a wide variety of materials such as wood, metal, plastic, and resin. Suitable for different shapes of material like pipe, squares tube, miniature molds, and so on. Ideal for Small Hobby and DIY Crafts.

COMPLETE ACCESSORIES & PORTABLE - Measures only 10*5.5*6 in and weighs about 1.5kg / 3.3 lbs. Comes with 1 metal blade, 1 resin blade, 1 wrench, 1 clamping jig, and 1 user manual.

SMOOTH & PRECISE CUTTING - The attached angle gauge allows cutting from 0° to 45°. It makes precise cuts up to 1/2" deep. It can make a cutting so smoothly and accurately that you may never have to file or sand the cutting end any more!

[ Ergonomic Design ] - WORX Angle Grinder weighs only 3.4 pounds (tool only),which is compact and light weight. Ergonomic design for one-hand operation and good approachability, even in narrow spaces and overhead work.

[Highly Versatile] Highly versatile for different materials, ideal for cutting metal materials, tile, thin concrete, plastic and more.

[ High Cutting Efficiency ] - WORX mini cutter features a powerful motor to produce 19500 no load RPM for cutting metal, tile, and plastic materials.

Zip through sheet metal as thick as

Air consumption: 3 CFM @ 90 PSI

Rugged die cast aluminum body with rubber grip

OVERLOAD CAPACITY: High performance 15-amp motor of chop saw delivers a high overload capacity with 3800 RPM

ADDED CONVENIENCE: Spindle lock of the metal chop saw allows the user the convenience to change the cutting wheel quick and easy

MAXIMUM USER PROTECTION: The metal cutting saw has a heavy duty guard for maximum user protection

Makita-built motor delivers 3, 600 RPM for faster cutting in a wide range of metals

Compact, ergonomic design at 13-3/4" Long and weighs only 5.7 lbs. For reduced operator fatigue

Built-in L.E.D. Light illuminates the work area