Best General International in 2026

12 INCH COMPOUND MITER SAW - This powerful saw features a 12" carbide tooth blade for fast, easy cutting of most dimensional lumber found on the jobsite up to 4x8 or 2x16

ACCURATE LASER GUIDED CUTTING - When precision is key to your jobs success, look to the integrated laser alignment system to help you produce fast, accurate cuts .

BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work.

PRECISION CUTTING - The advanced laser alignment system ensures accurate cuts every time!

HIGH-POWERED MOTOR - Comes standard with a powerful 1800 watt, 120V~60HZ, 15 amp motor.

VERSATILE DESIGN - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Cuts wood, plastic and aluminum (with correct blade). Cutting Capacity: Cross cut at 90 degrees: 3” x 12" (80 x 300 mm), Miter cut at 45 degrees: 3" x 8" (80 x 200 mm), Miter and Bevel compound cut at 45° and 45°: 1.5" x 8" (40 x 200 mm)

7.25 INCH COMPOUND MITER SAW - This powerful yet compact saw features a 7.25" carbide tooth blade for fast, easy cross-cutting of dimensional lumber as large as 2x8

POWERFUL 10 AMP MOTOR - Powered by a robust 10 amp motor this miter saw has a max no load speed of 5000 RPM and is capable of cutting through some of the toughest job site materials.

BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work.

UNIQUE TILTING HEAD - Tilt the head 38° left or 45° right while keeping your workpiece level. Ideal for enhanced control and more precise cuts.

ENHANCED SAFETY FEATURES - On/off safety switch and intergrated upper and lower blade guard assembly help to prevent accidental hand contact with an active blade.

ADJUSTABLE BLADE MOUNTING - Easily raise or lower the mounting position of the blade to make just the right cut.

UNIQUE TILTING HEAD - Tilt the head 30° left or 45° right to keep the workpiece level, allowing for better control and more precise cuts.

INTEGRATED BLADE GUARD - Upper and lower blade guard assembly helps prevent accidental hand contact with the blade. While, the switch protection device prevents unintentional start-up.

ADJUSTABLE BLADE MOUNTING - Easily raise or lower the mounting position of the blade to make just the right cut.

ERGONIMC FEEL - Comfortable horizontal “D” carry handle & Hold-down lock button with Safety interlock trigger.

SIMPLE, YET VERSITILE - Arbor lock makes blade changes quick & easy. Cuts conduit, ABS, copper pipe, tile and even concrete with correct blades.

POWERFUL - 1800 W, 120V~60Hz, Amps: 15, 2.5HP, No-load Speed: 3500rpm

SMOOTH & QUIET - Precision aluminum finned spin-balanced impeller for smooth operation & minimal noise.

SEAMLESS MOBILITY - Heavy duty base, mounted on four precision swivel casters with handle, allowing total mobility & stability while moving from machine to machine.

KEEP YOUR WORKSHOP SPOTLESS - Powerful 1.5 HP totally enclosed fan cooled (TFEC), permanently lubricated motor. Designed for small shop applications with a continuous duty rating.

120V, 60Hz, 1. 5HP, Oil Free, Max PSI: 150

SCFM: 4. 18 @ 40 PSI & 2. 31 @ 90PSI, Cut in Pressure: 90 PSI, Cut out pressure: 125 PSI

Tank Size: Height = 24. 6" & Diameter = 15. 16"; Estimated 80 hour life

Totally enclosed, fan cooled, permanently lubricated motor; designed for industrial applications with a continuous duty rating

Heavy-duty construction, mounted on four swivel casters for total mobility and stability

Precision spin-balanced aluminum impeller for smooth operation and minimal noise

Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops

The mitre saw has a precise miter system and machined base fence support

Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw

Patented axial-glide system for durable precision and compact workspace

Expanded cutting capacity: 14-Inch horizontal capacity, 6-1/2-inch vertical capacity, 6-1/2-inch crown capacity (45-degree spring)

Large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade

XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered

Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated

AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space

CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring

ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum

Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade.

Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence.

Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree

Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops

The mitre saw features the precise miter system and machined base fence support

Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically

Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops

The mitre saw has a precise miter system and machined base fence support

Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically

15 amp motor, 4,000 rpm delivers extended power and durability for the 12-inch miter saw blade

Adjustable stainless steel miter detent plate with 11 positive stops of the mitre saw improves productivity and ensures cutting

Precise miter system and machined-base fence support optimize cutting accuracy for DEWALT miter saw

ACCURATE CUTS: DEWALT DW3128P5 80-Tooth 12 Inches Crosscutting Tungsten Carbide Miter Saw Blade 2 Pack, helps you make quick, smooth, and accurate cuts

TUNGSTEN CARBIDE: Tougher tungsten carbide stays sharper longer

THIN KERF: Thin kerf for fast and smooth cutting action

15-inch wide material support of DEWALT miter saw stand supports wider work piece when cutting

DEWALT miter saw stand has a flip-up stop for fast conversion to a cut stop

Adjustable height from 3 7/8-inch to 6-inch to match any miter saw table height

Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility

Capacity to cup 3 5/8 in. nested crown and 3 1/2 in. base vertically

Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy

Compact design of DEWALT miter saw stand allows easy transport and storage

1000lb capacity (each) of DEWALT miter saw stand handles the toughest jobs

Lightweight aluminum construction (17 lbs.) allows for easy transport to and from the jobsite

ADJUSTABLE: Featuring a Bosch-exclusive, patented Gravity Rise System designed for rapid set up and easy breakdown, taking the toughest jobs to the next level

CAPACITY: The Bosch T4B Gravity-Rise Miter saw stand has up to 18 feet of material capacity, the highest capacity among fully portable units

PORTABLE: Built with 8-Inch pneumatic wheels for ease of transport over jobsite terrain with even the heaviest miter saws attached

Product 1: Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut

Product 1: Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring

Product 1: Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum

UP TO 3X LIFE and UP TO 2X LIFE** - Designed For Increased Accuracy***

Patented Body Slot Design for Low Vibration

Optimized Tooth Geometry Designed For Increased Accuracy

10" Compound Miter Saw

Same tools. New name. Hitachi power tools has renamed to Metabo HPT

Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT

Non-marring feet on tool mount of the miter saw mounting brackets will not scratch material

Easy-relase attachment clamps allows fast attachment and detachment of tool

Tough polymer feet allows tool to be placed and used on flat surface

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts

DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right

LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers

Easily adjustable mounting rails of DEWALT miter saw stand adapt to nearly any miter saw

Miter saw stand with wheels featuring wide rubber grip provide easy jobsite mobility

The rolling miter saw stand features three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up

ACCURATE - Crafted from CNC-machined Anodized Aluminum Alloy Steel; Features easy-to-read precision laser engraved scales

DESIGN - Internal Teflon O-ring mechanism swivels during operation and ensures smooth & precise read on inside/outside corners

FORGET ABOUT THE GUESSWORK - Two scales transfer your work angle directly to the miter saw for an accurate Miter cut, and Single cut