Best Single Bevel Power Miter Saws in 2026

Tall sliding fences support 6-3/4-inch base vertically

Bevels 0 degree - 48degree left and right

2-inch x 14-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 10-inch dimensional lumber at 45 degree

Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings for accuracy and durability

Efficient dust collection system captures over 75% of dust generated

Oversized, high visibility bevel scale with positive stops.

Tall sliding fences support crown molding up to 7-1/2-inch nested and base molding up to 6-3/4-inch vertically against the fence while easily sliding out of the way for bevel cuts

Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x10 at 45 degree

Adjustable stainless-steel miter detent plate with 10 positive stops improves productivity and ensures cutting accuracy

Miters 60 degree to the right and 50 degree to the left providing increased capacity

Oversized bevel scale makes bevel angle adjustments accurate and easy

Compact, lightweight design (58 lbs.) allows for easy transport and storage

Cam lock miter handle with detent override deliver quick and accurate miter angles

0 degree - 50 degree left and right miter capacity

Cam lock miter handle with detent override delivers quick and accurate miter angles.

Integrated CUTLINE; LED work light system provides adjustment-free cut line indication for accuracy and visibility.

Tall sliding fence supports crown molding up to 5-1/4-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts

Bevels 0 degree-48degree to the left and 0 degree-3degree to the right for increased capacity

0 degree-50 degree left and right miter capacity for greater versatility

Lightweight (42 lbs.) with built-in carry handle for easy portability

Cam lock miter handle with detent override deliver quick and accurate miter angles

Three hardened steel bevel stops at 0 degree, 33.9degree, and 45 degree delivers versatility at most co mm.on bevel angles

Includes: a carbide blade, dust bag, blade wrench and comfortable side handles in the base

Miter detent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents

Adjustable stainless steel miter detent plate with 11 positive stops

Tall sliding fences that support crown moulding up to 5-1/4-Inch. nested and base moulding up to 6-1/2-Inch vertically against the fence while easily sliding out of the way for bevel cuts

Crosscut capacity up to 2x8-Inch dimensional lumber

Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown moulding laying flat

4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles

Cam lock miter handle with miter detent override that eliminates the need to twist the handle to lock in on the angle

Oversized bevel scale makes bevel angle adjustments accurate and easy

Compact, lightweight design (30 lbs.) allows for easy transport and storage

Cam lock miter handle delivers quick and accurate miter angles

BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts

LARGE TABLE: Offers better material support with vice clamping system to secure work piece

THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

HORIZONTAL HANDLE: For a secure hold

WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty

ELECTRIC BRAKE: Halts the rotation of the blade within seconds preventing unintended cuts

Maximum Output : 1,950 W

2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees

CUTS AT COMMON ANGLES - Cuts up to 50 degrees left and right with 11 positive stops at most used angles

COMPACT: Featuring a compact design that replaces the sliding rail system, taking up to 10 In. less workspace than a slide miter saw. This Bosch miter saw is perfect for tight quarters where other saws just won’t do.

COMFORT: Large, form-fitting ergonomic ambidextrous trigger handle with soft grip provides maximum comfort for all-day use while the clear lower guard allows for unobstructed visibility throughout the cutting job.

Accurate cuts with sliding functionality, adjustable cut depth, and laser precision guidance

3-year limited

15 amp Dual-Field motor keeps the motor cooler, increasing longevity and work efficiency; 4 x 14 cross cut capacity lets you handle any cut needed for the job

Dual bevel cutting capacity for both left and right cuts gives you more flexibility, while adjustable 0 ̊ and 45 ̊ bevel stop presets provide greater accuracy

Compact and lightweight aluminum tubular design for job site portability; weighs only 33.7 lbs

Large solid rubber wheels and side handle allow the stand with miter saw attached to be easily transported around the job site (miter saw not included)

Material support extensions extend to 100-1/2" and support up to 500 lbs. For increased cutting efficiency

Molded handle and full size trigger is comfortable for right or left handed users 15 amp motor for powerful cuts and blade brake for safety shadow guide cut line for repeatable accuracy

Dual bevel 47° left/47° right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops | 50° left miter/60° right miter capacity with 10 miter detents and positive stops

0-45 Degree bevel angle range, to the left with adjustable bevel stops for precision cuts

Horizontal handle with soft, vibration reducing Elastomer grip adds comfort and control

Large pivoting flip fence, raises 4" for cutting crown molding vertically

Thumb actuated positive stops, easy to use for quick miter adjustments

Dust collector attachment, to minimize airborne particles

Only 26.5 lbs to facilitate maneuverability and portability

Includes: 10" 24T TCT Saw Blade (311128), Pivoting Flip Fence (326704), Dust Bag (322955), Vise Assembly (322952), 10mm Box Wrench (940543), 4mm Hex Bar Wrench (944458), Material Support Extension (321549)

Onboard LED cutline guide illuminates your line of cut for maximum accuracy

Includes an 80-tooth carbide-tipped blade with a 1-inch arbor (model BL1280), two quick-lock table extension support arms, two adjustable support fences, one quick-clamp assembly, a dust port, a dust bag, a carrying handle, and a two-year warranty

Features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity

Includes a 10-inch 40-tooth carbide-tipped blade, two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty

PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds

PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive design provides ultimate portability with a top carry handle and a weight of just 37 pounds

Capacity – cuts Nominal 4x4 and 2x6 at 90° and 2x6 with one pass

Bevels left - from 0°- 47°, cuts Nominal 2x6 at full bevel

Electric brake stops the blade in seconds and Arbor lock for quick blade changes

Includes: 60T Carbide blade installed, hold down Clamp, dust bag, Two extension wings, blade wrench and two AAA batteries for laser

Make precision miter cuts up to 45 degrees left and right, with 9 position stops at commonly used angles

Arbor lock for quick blade changes

Die cast aluminum base for portability and better accuracy

9 Positive detent miter stops lock firmly in place for faster setup and accurate cuts!

Max Cutting Capacity: @45°x45°: H 1-3/8” x W3-5/16”

POWERFUL 15 AMP MOTOR - Powered by a robust 15 amp motor this miter saw has a max no load speed of 4200 RPM and is capable of cutting through some of the toughest job site materials.

DUAL RAIL SLIDING SYSTEM - The two rail sliding system enhances rigidity and provides extra capacity when making long crosscuts, miter cuts and bevel cuts.

Features a 7-1/2 in. crown molding nested capacity and a 6-3/4 in. base board vertical capacity

Includes a 12 in. 60-tooth carbide-tipped blade, 2 retractable table extensions with work stops, 1 clamp assembly, and a dust bag

BITURBO BRUSHLESS TECHNOLOGY: featuring a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by CORE18V PROFACTOR batteries (sold separately)

CONVENIENT PORTABILITY: weighs only 59.3 Lbs. (tool only, not including battery).ECO MODE: extends the battery runtime by up to 20%, for getting work done.Battery & charger sold separately

Electric brake stops the blade within seconds of releasing switch

Lightweight unit is easy to move from room to room or even from job to job

⚙【Comfort Miter Saw】- Ergonomic trigger handle and soft grip provide maximum comfort for all-day use.Meanwhile the strong plastic toothed cover of the blade will protect you from accidental debris.HYCHIKA compound miter saw will offer smooth, accurate bevel and crosscuts in a variety of work-piece.

⚙【Complete Accessories & Perfect After-sales】-1* HYCHIKA Compound Miter Saw; 1* 40T TCT blade; 1* Clamping device; 1* Dust bag; 2*Extension Rail;1* Allen wrenches; If you have any questions about our products, please feel free to contact us.

Accurate laser guide system – precisely aligns the cut line to the blade

【Clean Environment & Extension Table】 Additional chip bag connects directly to the saw, and helps to collect sawdust away from the workpiece during cutting. 35mm dust port allows you to connect your vacuum cleaner with a adapter to capture more of the dust. Extension table with vice clamping provides better support and balance, adding stability when cutting.

【Package Contents】 DWT advanced 10-inch 15-amp miter saw, 1*10" multi-function blade, 2*10" blades for wood, 1* dust bag, 2*hexagonal wrench, 1* clamping device, 1*user Manual, 1*warranty card, 12 months Warranty.

Onboard LED cutline guide illuminates your line of cut for maximum accuracy

Includes 7.25-inch 40-tooth carbide-tipped blade (w/ 5/8-inch arbor), two table extensions, one clamp assembly, a dust port, an onboard carrying handle, a dust bag, and a two-year warranty

4" x 14" cross cut capacity lets you handle any cut needed for the job

Dual bevel cutting capacity for both left and right cuts gives you more flexibility, while adjustable 0 ̊ and 45 ̊ bevel stop presets provide greater accuracy

TECHNICAL SPECIFICATIONS: Motor Type = Brushless, No. Load Speed = 3300/min, Saw Blade Diameter = 7", Bore = 5/8", Mitre Cutting Range = ± 45°, Max Cutting Depth (0⁰ mitre / 0⁰ bevel) = 2 x 8"

TECHNICAL SPECIFICATIONS CONTINUED: Max Cutting Depth (0⁰ mitre / 0⁰ bevel) = 2 x 8", Max Cutting Depth (45⁰ mitre / 0⁰ bevel) = 2 x 4", Max Cutting Depth (0⁰ mitre / 45⁰ bevel) = 1 1/2" x 8", Max Cutting Depth (45⁰ mitre / 45⁰ bevel) = 1 1/2" x 4"

DESIGNED TO LAST: The JCB range of power tools has been developed to reflect the JCB ethos of quality and innovation and to offer products that exceed the ever increasing standards and needs of professional users, as well as the home DIY enthusiast

INTEGRATED FEATURES: This Miter Saw is ideal for quick and precise cutting of angles with pre-sets and battery pack with in-built capacity display. It has a laser guide for improved accuracy, and also includes a 2.4A charger

SUPERIOR BUILD QUALITY: Welcome to the world of JCB Professional Tools. The experienced engineering team at JCB Tools has worked closely with the JCB Industrial Design team to produce a comprehensive range of tools and accessories

GUARANTEED QUALITY: With built in overload protection, a safety interlock trigger, motor brake for added safety of the user and a one year back to base guarantee for extra peace of mind, you can rest easy knowing you made the right choice with JCB