Best Dual Bevel Power Miter Saws in 2026

Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops

The mitre saw has a precise miter system and machined base fence support

Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw

Patented axial-glide system for durable precision and compact workspace

Expanded cutting capacity: 14-Inch horizontal capacity, 6-1/2-inch vertical capacity, 6-1/2-inch crown capacity (45-degree spring)

Large easy-to-read uniform bevel and stainless steel miter scales with marked detents and roof pitch angles

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade

XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered

Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated

Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade.

Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence.

Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree

Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility

Capacity to cup 3 5/8 in. nested crown and 3 1/2 in. base vertically

Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts

DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right

LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers

ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment

CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup.

CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch

Powerful 15 AMP direct drive motor for improved performance; 4,600 RPM

Dual post compound pivoting arm

Miter cuts 0°-45° left and 0°-52° right

Designed to cut a wide range of materials without changing blades

Clean, consistent and smooth cutting with Left and Right 0° – 45° bevel tilt and 50-50 miter angles

Compatible with Evolutions Miter Saw Stand (EVOMS1)

Worm drive delivers the relentless power and trusted durability needed to get the job done on any jobsite

Lightest-in-class construction and convenient top handle makes transportation easy

Led shadow light provides high precision cuts with greater accuracy than lasers

Powered by two LXT batteries; x2 LXT technology delivers more power, speed and run time without the hassles of a cord

Makita built electronically controlled BL motor delivers 4, 400 RPM for faster and smoother cutting

The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life

Shadow guide cutting line projects a consistent and accurate cutting line on your work piece

Product dimensions – 30” D x 25.5” W x 21.5” H | Weight – 57 lbs. | Voltage – 120V | Blade size – 12” Diameter | Arbor hole size – 1” | Speed – 4,000 RPM | Max cut thickness – 6.5” | Cord length – 7 ft.

One-hand front miter Controls with push button miter detent override and front bevel release for quick movement | 15 amp motor for powerful cuts and blade brake for safety

Powerful 15-amp motor crosscuts boards up to 13.25 inches wide and 4.5 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel or miter up to 45 degrees in either direction (featuring 9 miter stops)

CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.

SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°

CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.

Powerful 15-amp motor crosscuts boards up to 12 inches wide and 3.75 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel up to 45 degrees or miter up to 49 degrees in either direction (featuring 9 miter stops)

Compact slide system with large cutting capacity

Sliding sub-fence

Laser marker

Miter angle fine adjust with detent override makes it simple to dial-in precise miter angles

Miter angle digital readout provides repeatable accuracy to 0.1 degree

Dual integral job-site lights fully illuminate the work piece and cut line from either side of the blade

Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!

Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile!

Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the integrated laser guide!

12 INCH COMPOUND MITER SAW - This powerful saw features a 12" carbide tooth blade for fast, easy cutting of most dimensional lumber found on the jobsite up to 4x8 or 2x16

ACCURATE LASER GUIDED CUTTING - When precision is key to your jobs success, look to the integrated laser alignment system to help you produce fast, accurate cuts .

BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work.

Powerful 15 Amp motor cuts boards up to 13-3/8 in. W and 3-1/2 in. thick

Bevel and miter 45° in either direction (featuring 9 m stops)

Onboard class II laser guide combines with the LED work light for maximum clarity and precision

Include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.

The KAPEX features a rail forward design which increases precision and creates a compact footprint while preventing head play for accurate cuts.

Easily align cuts from the left or right side using the dual lasers. The lasers clearly define the material which will be removed during the cut.

Increases productivity and efficiency

Delivers over 600 cuts per charge

Dual bevel functionality

10 in. Blade with versatile ip-down fence design provides best-in-class 16 in. Crosscut capacity

Dual bevel 45 left/45 right with front bevel release and 7 positive bevel stops at the most popular angles and easy to reach lever override to move between stops

50 left miter/60 right miter capacity with 10 miter detents and positive stops and 15 amp motor for powerful cuts and blade brake for safety

Delivers up to 400 cuts per charge

Cam locking miter system

Shadow cut line indicator

SURGEON PROFACTOR PERFORMANCE: for a truly mobile jobsite solution, this saw provides light weight and pro capacity

AXIAL-GLIDE SYSTEM: has an articulating arm, for wider cross-cuts enhanced alignment, and smooth glide while taking less space

LARGE CUTTING CAPACITY: features a cut capacity of 4.7 In. depth and a 15.7 In. width/crosscut; ideal cutting solution for trim, finish, framing and other applications

Has a durable design

Side carrying handles

Provides more Run-Time

GREATER VERSATILITY: Adjustable left and right fence and extension tables.

FAST ANGLE ADJUSTMENTS: Change miter angles quickly with the single-motion thumb lever.

EFFICIENT DUST COLLECTION: 2-1/2" adapter connects port to a dust collection bag.

GREATER SUPPORT: Adjustable left and right fence, and extension tables.

SMOOTH SLIDE OPERATION: Enclosed linear bearings.

MAXIMUM CONTROL: Ergonomic, D-shaped, ambidextrous, rubber grip handle.

This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box