Best Cordless Chop Saws in 2026

Powerful 15-amp motor delivers 5 300-RPM for greater speed and faster cuts

7-1 4-inch carbide-tipped blade included. Spindle lock for easy blade changes.

51° bevel capacity with a positive stop at 45° for a wide variety of cuts

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade

XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered

Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated

AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space

CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring

ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum

Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade.

Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence.

Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree

Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility

Capacity to cup 3 5/8 in. nested crown and 3 1/2 in. base vertically

Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy

Makita-built variable speed motor delivers 0-2,600 strokes per minute for faster and more efficient cutting

3 orbital settings plus straight cutting for use in a wide range of materials

Tool-less blade change lever allows for faster blade installation and removal for increased productivity

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts

DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right

LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers

ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment

CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup.

CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch

Makita-built motor delivers 1,500 RPM for faster cutting

3-3/8" blade delivers a maximum cutting depth of 1" for a wide range of cutting applications

Adjustable cutting depth from 1" at 90° and 5/8" at 45°

POWERFUL MOTOR: 3,800 RPM motor of CRAFTSMAN miter saw is made for cutting 2X dimensional lumber, hardwoods, baseboard and trim with ease

SLIDE CAPABILITIES: The mitre saw has 8-inch cross cut at 90-degree and 5-1/2-inch cross cut at 45 degree

ADDED CAPACITY: The sliding miter saw cuts 3-5/8-inch nested crowns and 3-1/2-inch baseboards vertically

Designed to cut a wide range of materials without changing blades

Clean, consistent and smooth cutting with Left and Right 0° – 45° bevel tilt and 50-50 miter angles

Compatible with Evolutions Miter Saw Stand (EVOMS1)

Powered by two LXT batteries; x2 LXT technology delivers more power, speed and run time without the hassles of a cord

Makita built electronically controlled BL motor delivers 6, 000 RPM for maximum performance and 50% longer run time per charge

The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life

Worm drive delivers the relentless power and trusted durability needed to get the job done on any jobsite

Lightest-in-class construction and convenient top handle makes transportation easy

Led shadow light provides high precision cuts with greater accuracy than lasers

[SMALL FOR A REASON] Quick, more efficient cuts and you can take it with you when you don’t want to lug a big saw around

[EZ-SET DEPTH GAUGE] The lever lets you go from 0-45 degree bevel settings with quick adjustment

[MADE FOR LUMBER] Excellent depth-of-cut for slicing up to 2" stock lumber. Cut 2x4s in a single pass. It also cuts metal, tile, and plastic

Powerful BL Motor delivers 5,700 RPM for fast cutting

Weighs only 28.2 lbs. with battery (battery not included) for easy portability

Large dimensional lumber cutting capacity: 2" x 12" at 90Degree and 2" x 8" at 45Degree

Shadow guide cutting line projects a consistent and accurate cutting line on your work piece

Product dimensions – 30” D x 25.5” W x 21.5” H | Weight – 57 lbs. | Voltage – 120V | Blade size – 12” Diameter | Arbor hole size – 1” | Speed – 4,000 RPM | Max cut thickness – 6.5” | Cord length – 7 ft.

One-hand front miter Controls with push button miter detent override and front bevel release for quick movement | 15 amp motor for powerful cuts and blade brake for safety

Powerful 15 AMP motor delivers 3,800 RPM for superior performance and durability

Adjustable spark guard designed to divert sparks

Two-stage lock-off power button for operator convenience

Powerful Copper Motor :The Pure Copper Motor Makes This Small Cordless Chainsaw Power Increased by 40%, Power Consumption Reduced by 30%. With the 20V Rechargeable Battery, Mini Chain Saw Cut a Tree with a Diameter of 4 inches in 5 Seconds, Very Fast Cutting and Time-saving.

Safety Guaranteed:We Add the Safety Lock and Cover Beyond Chain to this Electric Power Chainsaw, Which Can Avoid 95% of Mis-operations and Potential Risks. The Motor Has an Intelligent Anti-overheating System, It Will Shut Off the Motor When ItI Is Overheating, Please Unplug the Battery and Restart It.

6inch & 4inch Mini Chainsaw:We Equipped this Rechargeable Mini Chainsaw with 6 inch and 4 inch Guide Bar, Enables this Cordless Mini Chainsaw Serves Under Different Occasions, Switch Between 4inch and 6 inch Just Need Loose the Saw Chain Use A Nut Driver to Disassemble Guide Bar to Install another One.

10" slide miter saw with the Crown molding cutting capacity (6-5/8" nested) of a 12" miter saw

Linear ball bearing system engineered to deliver "dead-on" accurate cuts

Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4")

Fits Most 7-1/4, 8, 8-1/4, 10, And 12-Inch Miter, Sliding Compound Miter, Chop, And Portable Saws

New Recessed Laser Design To Protect The Laser From Hitting The Material On Deep Cuts

New Thinner Design To Fit More Saws

Powerful 15-amp motor crosscuts boards up to 13.25 inches wide and 4.5 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel or miter up to 45 degrees in either direction (featuring 9 miter stops)

CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.

SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°

CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.

Powerful 15-amp motor crosscuts boards up to 12 inches wide and 3.75 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel up to 45 degrees or miter up to 49 degrees in either direction (featuring 9 miter stops)

Compact and Lightweight Design for Job Site Portability

Powerful 10.5 AMP direct drive motor requires less maintenance and delivers 5,000 RPM

Miters 0-50 Degrees left & 0-60 Degrees right, with positive stops at 0, 15, 22.5, 31.6, 45 and 50 Degrees (left and right) plus 60 Degrees (right)

Miter angle fine adjust with detent override makes it simple to dial-in precise miter angles

Miter angle digital readout provides repeatable accuracy to 0.1 degree

Dual integral job-site lights fully illuminate the work piece and cut line from either side of the blade

Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!

Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile!

Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the integrated laser guide!

🛍️【Powerful Motor & 3 Saw Blades】Powerful 6.2Amps copper motor delivers full-size performance at 3,500 RPM high cutting speed, you can use HYCHIKA circualr saw to cut wood, plastic, gypsum board, PVC pipes and ceramic tiles. 3 Blades included: 1x24T TCT blades for wood cuts, 1x60T HSS blades for plastic and soft-metal cuts, 1pcs grit diamond blades for tile cuts, extending the applications of the compact circular saw.

🛍️【Precise Scale Ruler and Dust Collection】- Equipped with a scale to ensure precise straightness. Greatly improves your work efficiency and cutting performance. The built-in dust collection port and included vacuum adapter allow connection to a shop vacuum or dust collection system, helping you to maintain a cleaner working environment.

🛍️【0-45° Bevel Cutting & Depth Guide】The HYCHIKA compact circular saw allows you to change your cutting angle freely from 0° to 45°(50° max). Equipped with adjustable cutting depth, the max cutting depth of 1-7/8" at 90°and 1-1/4" at 45° can meet your versatile needs. Easy-set depth gauge lever for adjustable cutting depth from 0-32mm(1’’).

Automatic Speed Change technology adjusts cutting speed and torque during cut for optimum performance

Large cutting capacity (2-1/4” at 90°) allows for 2" conduit to be cut in a single pass

BL Motor delivers 3,900 RPM for faster cutting

️The circular saw is lightweight and powerful machine with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity

The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Water line feeds water to the blade decreasing dust and increasing blade performance and life

Used wet or dry, the dual integrated dust management system takes the dust out of the job; For wet cuts, build-in water feed attachment and control the flow with the convenient valve, water line feeds water to the blade decreasing dust and increasing blade performance and life. The tool also comes standard with GFCI built-in the cord.