Best Sliding Chop Saws in 2026

Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops

The mitre saw has a precise miter system and machined base fence support

Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade

XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered

Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated

AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space

CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring

ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum

Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade.

Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence.

Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree

Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility

Capacity to cup 3 5/8 in. nested crown and 3 1/2 in. base vertically

Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts

DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right

LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers

ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment

CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup.

CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch

POWERFUL MOTOR: 3,800 RPM motor of CRAFTSMAN miter saw is made for cutting 2X dimensional lumber, hardwoods, baseboard and trim with ease

SLIDE CAPABILITIES: The mitre saw has 8-inch cross cut at 90-degree and 5-1/2-inch cross cut at 45 degree

ADDED CAPACITY: The sliding miter saw cuts 3-5/8-inch nested crowns and 3-1/2-inch baseboards vertically

Designed to cut a wide range of materials without changing blades

Clean, consistent and smooth cutting with Left and Right 0° – 45° bevel tilt and 50-50 miter angles

Compatible with Evolutions Miter Saw Stand (EVOMS1)

Worm drive delivers the relentless power and trusted durability needed to get the job done on any jobsite

Lightest-in-class construction and convenient top handle makes transportation easy

Led shadow light provides high precision cuts with greater accuracy than lasers

Powerful BL Motor delivers 5,700 RPM for fast cutting

Weighs only 28.2 lbs. with battery (battery not included) for easy portability

Large dimensional lumber cutting capacity: 2" x 12" at 90Degree and 2" x 8" at 45Degree

Shadow guide cutting line projects a consistent and accurate cutting line on your work piece

Product dimensions – 30” D x 25.5” W x 21.5” H | Weight – 57 lbs. | Voltage – 120V | Blade size – 12” Diameter | Arbor hole size – 1” | Speed – 4,000 RPM | Max cut thickness – 6.5” | Cord length – 7 ft.

One-hand front miter Controls with push button miter detent override and front bevel release for quick movement | 15 amp motor for powerful cuts and blade brake for safety

10" slide miter saw with the Crown molding cutting capacity (6-5/8" nested) of a 12" miter saw

Linear ball bearing system engineered to deliver "dead-on" accurate cuts

Innovative direct drive gearbox and guard system is engineered for increased vertical cutting capacity (5-1/4")

Fits Most 7-1/4, 8, 8-1/4, 10, And 12-Inch Miter, Sliding Compound Miter, Chop, And Portable Saws

New Recessed Laser Design To Protect The Laser From Hitting The Material On Deep Cuts

New Thinner Design To Fit More Saws

Powerful 15-amp motor crosscuts boards up to 13.25 inches wide and 4.5 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel or miter up to 45 degrees in either direction (featuring 9 miter stops)

Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick

Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left

Onboard class II laser guide illuminates your line of cut

CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.

SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°

CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.

Compact and Lightweight Design for Job Site Portability

Powerful 10.5 AMP direct drive motor requires less maintenance and delivers 5,000 RPM

Miters 0-50 Degrees left & 0-60 Degrees right, with positive stops at 0, 15, 22.5, 31.6, 45 and 50 Degrees (left and right) plus 60 Degrees (right)

Miter angle fine adjust with detent override makes it simple to dial-in precise miter angles

Miter angle digital readout provides repeatable accuracy to 0.1 degree

Dual integral job-site lights fully illuminate the work piece and cut line from either side of the blade

Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!

Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is inexpensive and versatile!

Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the integrated laser guide!

PRECISION CUTTING - The advanced laser alignment system ensures accurate cuts every time!

HIGH-POWERED MOTOR - Comes standard with a powerful 1800 watt, 120V~60HZ, 15 amp motor.

VERSATILE DESIGN - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Cuts wood, plastic and aluminum (with correct blade). Cutting Capacity: Cross cut at 90 degrees: 3” x 12" (80 x 300 mm), Miter cut at 45 degrees: 3" x 8" (80 x 200 mm), Miter and Bevel compound cut at 45° and 45°: 1.5" x 8" (40 x 200 mm)

Powerful 15 Amp motor cuts boards up to 13-3/8 in. W and 3-1/2 in. thick

Bevel and miter 45° in either direction (featuring 9 m stops)

Onboard class II laser guide combines with the LED work light for maximum clarity and precision

Include a 3-year wear-and-tear warranty, 2-day standard repair time, and 1-month satisfaction guarantee.

The KAPEX features a rail forward design which increases precision and creates a compact footprint while preventing head play for accurate cuts.

Easily align cuts from the left or right side using the dual lasers. The lasers clearly define the material which will be removed during the cut.

Increases productivity and efficiency

Delivers over 600 cuts per charge

Dual bevel functionality

While this mini table saw bring your hope to the reality. Unibody 3mm thich steel frame and aluminum alloy panel with 775 type high torque motor which maximum rotating speed up to 7000RPM providing ultra strong cutting power but low noise.

The cutting table is quipped with ruler, baffle meeting your accure cutting needs and safety.

Come along with B12 drill chuck with 0.6-12mm clamping capacity can be used as the electric polisher or drill when install the corresponding pars.

Delivers up to 400 cuts per charge

Cam locking miter system

Shadow cut line indicator

Flexible power -The 12-inch miter saw blade has the corded or cordless power

Runtime - The mitre saw provides up to 289 cross cuts in 3-1/4 inch baseboard

CUTLINE blade positioning system of DEWALT miter saw delivers accurate line of sight to the cut

SURGEON PROFACTOR PERFORMANCE: for a truly mobile jobsite solution, this saw provides light weight and pro capacity

AXIAL-GLIDE SYSTEM: has an articulating arm, for wider cross-cuts enhanced alignment, and smooth glide while taking less space

LARGE CUTTING CAPACITY: features a cut capacity of 4.7 In. depth and a 15.7 In. width/crosscut; ideal cutting solution for trim, finish, framing and other applications

[THE POWER TO OUTPERFORM] Worx Nitro tools are engineered to provide greater power, performance, and run time

[WORK HOLDING CLAMP] Sliding compound miter saw features built-in lever to hold the work piece in place on both sides of the blade while cutting

[USE POWER SHARE PRO BATTERY] Battery and Charger sold separately. For optimal run time and performance, use Power Share PRO Batteries: WA3012 (4.0Ah) and WA3571 (5.0Ah)