Best Wen Table Saws in 2026

3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity

Variable speed goes from 400 to 1600 strokes per minute

Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts

Made in the USA!

Milwaukee Deep Cut Model #'s 6230, 6230N, 6232, 6232-5, 6232.51 6232-55, 6232-6, 6232-6N, 6232-8N, 6236, 6236N, 6238, 6238-8, 6238N, 0729-20, 0729-21

Dewalt Deep Cut Model #'s DWM120, DWM120K, D28770, D28770K, DCS374B, DCS374P2

Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish

Features a spacious 30-by-6-inch table

Remove 0 to 1/8 of an inch of material with each pass

Ditch the table saw: rip boards up to 2.25 inches thick or create 45-degree bevel cuts in boards up to 1.65 inches thick

Compatible with the WEN CT9502 and CT9110 Track and the WEN CT992F Track Saw Clamps

Dual 20V max battery ports provide cordless and reliable power to the brushless motor with variable speed operation from 2000 to 5500 RPM

Powerful 15-amp motor crosscuts boards up to 13.25 inches wide and 4.5 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Bevel or miter up to 45 degrees in either direction (featuring 9 miter stops)

Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick

Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left

Onboard class II laser guide illuminates your line of cut

Product 1: Powerful 15-amp motor crosscuts boards up to 12 inches wide and 3.75 inches thick

Product 1: Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Product 1: Bevel up to 45 degrees or miter up to 49 degrees in either direction

2.8-amp motor rotates the blade up to 2500 feet per minute

Create cuts up to 3-1/2 inches deep and 9 inches wide

Uses 59-1/2-inch blades anywhere from 1/8 to 3/8 inches in size

Powerful and Efficient - 3A powerful low noise induction motor band saw with 2500FPM blade speed and 1720RPM motor speed. The band saw adopts heat dissipation system to extend the service life. You don't have to worry about cutting back and forth due to low power, and the cutting surface is neat. It can slow down the vibration more than the ordinary band saw.

Sharp and Quick - The blade size of bandsaw is length: 59-1/2 inches, width: 1/8 ~ 3/8 inches. The maximum cutting depth is 3-1/2 inches, and the maximum cutting width is 9 inches.With strong and sharp blade and powerful 3A induction motor, band saw can cut different types of wood and soft metal accurately and quickly at the speed of 1720RPM.

Accurate and Multi Angle - Band Saws for Wood has a sturdy cast aluminum table tilting from 0°to 45°with 120°miter gauge. Rip fence for straight, accurate cuts. Band saw can cut straight line, curve and multi angle, which is an ideal choice for woodworking. Bandsaw for woodworking table size: 12-5/16" x 11-7/8".

4 Main Updates about the 2022 model: Larger steel worktable, updated blade holder, changing knob, and cast aluminum tension knob

Motor: 1.2-Amp DC Motor provides Quiet and Powerful Performance, variable speed providing up to 1600 RPM no-load speed

Worktable: Updated18.2-by-11.5-inch iron worktable can bevels up to 45 degrees to the left for angled cuts. Cutting depth is 2-Inch with a 16-Inch throat depth

Powerful 15 Amp motor cuts boards up to 13-3/8 in. W and 3-1/2 in. thick

Bevel and miter 45° in either direction (featuring 9 m stops)

Onboard class II laser guide combines with the LED work light for maximum clarity and precision

While this mini table saw bring your hope to the reality. Unibody 3mm thich steel frame and aluminum alloy panel with 775 type high torque motor which maximum rotating speed up to 7000RPM providing ultra strong cutting power but low noise.

The cutting table is quipped with ruler, baffle meeting your accure cutting needs and safety.

Come along with B12 drill chuck with 0.6-12mm clamping capacity can be used as the electric polisher or drill when install the corresponding pars.

Parallel-arm design combined with heavy duty steel construction limit vibration and reduces noise

Spacious 25-5/8-by-16-inch steel table bevels up to 45 degrees to the left and 30 degrees to the right

Dual side panels flip open for easy-access tool-free blade changes

9.5-amp motor creates cuts up to 8.85 inches deep and 13-3/8 inches wide

Uses 100-3/4-inch blades anywhere from 1/8 to 1 inch wide

Spacious 21-1/2 x 15-3/4-inch work table bevels up to 45 degrees

Cut into Good Times: Are you tired of big pieces of wood getting the best of you? Well, get ready for clean seamless cuts every time. Equipped with a powerful 15 Amp motor, the woodworking table saw cuts through various sizes of wood with ease at high speed of 4500 RPM. Its 40-tooth blade dramatically improves cutting efficiency.

Cut at Various Angles: With the help of an adjustable, full-length, parallel fence with a measuring guide rail, our table saw for jobsite ensures reliable and smooth rip-cutting every time. You are going to feel so satisfied with the results. You can set the blade to any desired angle between -60° to 60° for bevel-cutting. Stay in control and cut at the most common angles no matter what.

Your Security Comes First: Security is always our top priority. This jobsite table saw is designed with a security shield to prevent sawdust from lingering in the air. A blade guard prevents the blade from popping out after breaking, too. If the machine is overheating, the copper wire automatically starts overload protection to save the machine from damage. With security mechanisms like this put in place, you can't go wrong!

Product 1: 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide

Product 1: Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size

Product 1: Spacious 14-1/8 x 12-1/2 inch cast aluminum work table bevels up to 45 degrees

Versatile bandsaw portable table suit different models of band saw. Following is the applicable model of this band saw table portable, please take a reference. For Milwaukee Deep Cut Model #'s 6230, 6230N, 6232, 6232-5, 6232.51 6232-55, 6232-6, 6232-6N, 6232-8N, 6236, 6236N, 6238, 6238-8, 6238N, 0729-20, 0729-21. For Dewalt Deep Cut Model #'s DWM120, DWM120K, D28770, D28770K, DCS374B, DCS374P2. For Harbor Freight Bauer Deep Cut #'s 63763, 63444, 62800, 1678E-B, For Home Depot WEN Brand # 94396, for Makita Deep Cut Model #'s 2107F, 2107FK, 2107FZ, XPB02Z, BPB180Z-18VOLT, Bosch GCB10-5.For Grizzly Tools Deep Cut Model # G8692.

Easy installation with complete accessories and tools. Screws, hex screwdriver, wrench and a hook and loop tape will come with our portable band saw table for bandsaw. According to the experimental results, the installation of the portable band saw table stand can be completed in about 15 minutes under the guidance of manual and installation video

Stable construction with triangular table legs and locknut. The triangular table legs conform to the mechanics principle, which makes the portable band saw table for bandsaw more stable.

[BEVEL ANGLE and HEIGHT ADJUSTMENT] The blade height can be adjusted to meet your specific cutting needs with hand wheel. This table saw has a rack and pinion bevel control that provides 90°cross cutting and 0-45°bevel cutting.

[REMARKABLE CUTTING PERFORMANCE] Towallmark portable table saw features with high-quality 15 Amp motor, which can achieve 5000 RPM cutting performance, easy to cut all kinds of hardwood. And triangle supports at the back of the metal stand improves the stability of the table saw. Besides, extensions on both sides of the table top also allows it to handle a larger piece of wood more stably.

[PORT FOR DUST COLLECTOR] Towallmark table saw is designed with port for connecting dust collector at the back, which can help create a cleaner working environment. And it is also designed with storage part at the left and right sides for storing wrenches and push stick when they are not in use.

Features a rip capacity of up to 28-3/4 inches for taking on 4x8 plywood and OSB sheets

Powerful 15-amp 2 HP motor rotates the included 10-inch TCT 40T blade up to 4800 RPM

Adjust both the height and angle of the blade to cut boards up to 3-1/8 inches thick at 90 degrees and 2-1/4 inches thick at 45 degrees

All swivel design allows for easy mobility and maneuvering of equipment in tight spaces

Foot operated locking levers hold the base firmly in place

Adjustable in one inch increments to fit most machines

Features a rip capacity of up to 25 inches for taking on 4x8 plywood and OSB sheets

Powerful 11-amp motor rotates the included 8.25-inch TCT 24T blade up to 4500 RPM

Adjust both the height and angle of the blade to cut boards up to 2.75 inches thick at 90 degrees and 2 inches thick at 45 degrees

Powerful 9.5-amp motor crosscuts boards up to 11.5 inches wide and 2.5 inches thick

Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint

Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left

ADJUSTABLE BLADE ANGLE & HEIGHT: With hand wheel for blade height adjustment, the blade height of the table saw can be adjusted to meet your specific needs. What’s more, the blade angle can also be adjusted to provide 90°cross cutting and 0-45°bevel cutting. And it features 60T blade which can yield a smoother cut.

PORT FOR DUST COLLECTOR: The 10inch table saw is designed with port for connecting dust collector at the back (Note: It does not come with dust collector), which can help create a cleaner working environment. And it is also designed with storage part at the left and right sides for storing wrenches and push stick when they are not in use.

POWERFUL PERFORMANCE: The no load speed of the table saw is 5000RPM, which allows it to cut most wood with ease. And triangle supports at the back of the metal stand improves the stability of the table saw. Besides, extensions on both sides of the table top also allows it to handle a larger piece of wood more stably than those without extensions.

Product 1: Huge Cutting Capacity: The cutting capacity of the band saw: without base: 4.7"x4.7" deep-cut capacity for rectangular stock, 5" capacity for round stock. With base: 3.9"x3.2" deep-cut for rectangular stock, 3.93" for round stock.

Product 1: Powerful Motor: 1100W 10 amp powerful, pure copper motor, designed with controlled power to withstand any jobsite application. Cutting Speed: 137.8-472.4ft/min, provides quick and smooth cutting with no sparks and burrs.

Product 1: Ergonomics Design: Superior balance allows for more accurate cuts. Ergonomic soft grip back handle provides comfort during use. The saw blade guard can be adjusted to avoid the saw blade from jamming and is safer without hurting your hands.

Product 1: Universal design fits nearly every miter saw on the market

Product 1: Take on boards up to 10 feet in length and up to 750 pounds in weight

Product 1: Extend the support arms anywhere from 34 to 69 inches to support boards up to 10 feet long

Product 1: 2.8-amp motor rotates the blade up to 2500 feet per minute

Product 1: Create cuts up to 3-1/2 inches deep and 9 inches wide

Product 1: Uses 59-1/2-inch blades anywhere from 1/8 to 3/8 inches in size

Product 1: Features a 5-amp induction motor, a 10-inch swing, and a 2-inch spindle travel

Product 1: Adjust the mechanical variable speed anywhere from 530 to 3100 RPM

Product 1: Digital speed readout displays current RPM of the machine for maximum precision

Heavy-duty rolling stand transforms your benchtop table saw into a mobile jobsite saw

Elevate your table saw’s work surface to 35 inches above the ground

Stand features foldable legs, two 7.5-inch never-flat wheels, and a 32-by-34-inch footprint