Best Brass Table Saws in 2026

AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you 12 inches of valuable work space

CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring

ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category's best 90 percentage dust collection optimized for cutting 2x material with a vacuum

Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual

Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM

Rolling stand designed for easy set up and breakdown with excellent stability

ACCURACY: The Bosch-exclusive Axial-Glide System allows wider cross cuts and better alignment

CONVENIENCE: Featuring large, upfront metal bevel controls and Square lock precision fences for precise, quick and easy adjustments. Complete with dust collection chute and vacuum adapter for easy cleanup.

CONTROL: This miter saw provides accuracy and cutting control at all angles. Crown chop lock locks head in place for maximum chop cutting capacity for upright base moulding and nested crown. Depth Front-to-Back, Not Including Arm: 30 inch

Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity

Variable speed goes from 400 to 1600 strokes per minute

Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts

Carbide Hole Cutter precisely cuts material up to 3/16 in. thick.

Cuts stainless steel, mild steel, iron, copper and brass sheet.

Spring loaded pilot bit for fast drilling and clean plug ejection.

Compatible with Bosch 4000 10-inch table saws

CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without reaching behind the saw. The saw also features easy-to-read miter and bevel scales.

SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece support. Bevel Angle Range: -2° to 47°

CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed view of the saw in action. The detent system provides quick and accurate cuts.

[SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle

[CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts

[TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal

[GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts

[TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site

[ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, Carbon and Aluminum arrow shafts, and mini model making

High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel- no sanding required!

Ideal for Small Hobby and DIY Crafts - zinc came for stained glass, arrow shafts, and mini model making

【Powerful Cutting Performance】Equipped with high-power 15 Amp motor in low noise, this table saw delivers 5,000 RPM cutting performance to rip through various kind of hardwood with ease. And the heavy-duty table saw stand effectively prevents table from rollover during cutting.

【36 Tooth Blade & Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips.

【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting.

The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw.

Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles.

Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel.

While this mini table saw bring your hope to the reality. Unibody 3mm thich steel frame and aluminum alloy panel with 775 type high torque motor which maximum rotating speed up to 7000RPM providing ultra strong cutting power but low noise.

The cutting table is quipped with ruler, baffle meeting your accure cutting needs and safety.

Come along with B12 drill chuck with 0.6-12mm clamping capacity can be used as the electric polisher or drill when install the corresponding pars.

Functional Diversification: Our mini table saw allows for versatile use that can be used for small wooden stick cutting, acrylic cutting, aluminum alloy cutting, model material cutting, plastic cutting, etc. It applied to DIY craft workshops, creative research, and development.

Angle Cutting: There is 0-90 degree cutting that helps you work more conveniently. With acrylic baffle, this machine does not block the line of sight and makes sure the easy operation in the condition of security

Upgraded Motor: Small table saw is equipped with a 7 level power adapter that works more efficiently. Seven gears can be changed depending on your demands in order to meet your different cutting speeds

🔥【CAUTIONS & WARNINGS】For your own safety, please read the manual carefully before using and strictly comply with the rules of "Precautions". Correct using and proper maintenance methods can increase its lifespan.

🔥【Powerful Motor】Prostormer Table Saw adopts 15A powerful power, the maximum cutting power can reach about 5000 PRM.

🔥【Rip Fence Scale & Miter Gauge Scale】RIP FENCE SCALE shows the distance from the blade to rip fence. MITER GAUGE SCALE can be adjusted from -45° to 45° for cross cutting.

【Widely Applicable】This mini miter saw for crafts is suitable for cutting softwood, plastic, aluminum, copper, fiberglass, and brass, making it perfect for all your DIY projects.

【Accurate Cutting Saw】This mini miter cut-off chop saw for small precise jobs - Cutting soft wood, plastic, aluminum, copper, brass - cuts upto 1/2" thick wood or 1/2"dia 29 gauge metal tube.

【Adjustable Mini Chop Saw 】This mini chop saw for crafts cuts miter corners from 0° to 45° with adjustable miter guage, perfect for all your DIY projects.

Cut into Good Times: Are you tired of big pieces of wood getting the best of you? Well, get ready for clean seamless cuts every time. Equipped with a powerful 15 Amp motor, the woodworking table saw cuts through various sizes of wood with ease at high speed of 4500 RPM. Its 40-tooth blade dramatically improves cutting efficiency.

Cut at Various Angles: With the help of an adjustable, full-length, parallel fence with a measuring guide rail, our table saw for jobsite ensures reliable and smooth rip-cutting every time. You are going to feel so satisfied with the results. You can set the blade to any desired angle between -60° to 60° for bevel-cutting. Stay in control and cut at the most common angles no matter what.

Your Security Comes First: Security is always our top priority. This jobsite table saw is designed with a security shield to prevent sawdust from lingering in the air. A blade guard prevents the blade from popping out after breaking, too. If the machine is overheating, the copper wire automatically starts overload protection to save the machine from damage. With security mechanisms like this put in place, you can't go wrong!

【SAW BLADE HEIGHT ADJUSTABLE】The saw blade can be raised and lowered by turning the inner hex wrench, and the lifting range of the circular saw blade is: 0~1.34 inch. Rotate clockwise to raise the blade, and counterclockwise to lower the blade.

【POWERFUL MOTOR】This T60 electric table saw adopts an upgraded 895 motor, can hold a 4-inch saw blade, support the inner hole diameter of the saw blade 16/20mm, and the cutting depth is 0-1.18 inch. Suitable for DIY handicrafts, PCB board, Plastic , Acrylic, Wood, Bamboo, and Aluminum sheet cutting.

【UNIQUE PUSH TABLE FUNCTION】This multi-function push table can be operated with both hands, safe and reliable, for vertical cutting, wood and round copper slotting; Stable operation, no damage to materials; More accurate positioning than angle push ruler.

【Powerful Mini Miter Saw】- Make miter cuts from 0° to 45°. Cuts to a depth of 1/2 in. - ideal for frames and molding. High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel.

【High-Precision】- This 110V mini chop saw is so accurate that you might never have to file or sand ends! Has adjustable miter gauge for cutting soft metals, wood, plastic and other light materials, perfect for all your DIY projects.

【Precise Smooth Cuts】This mini cut off saw carbon arrow cutter is so accurate that you might never have to file or sand ends! Cuts wood, brass & similar light materials with smooth, precise cuts. Ideal for Small Hobby and DIY Crafts.

[BEVEL ANGLE and HEIGHT ADJUSTMENT] The blade height can be adjusted to meet your specific cutting needs with hand wheel. This table saw has a rack and pinion bevel control that provides 90°cross cutting and 0-45°bevel cutting.

[REMARKABLE CUTTING PERFORMANCE] Towallmark portable table saw features with high-quality 15 Amp motor, which can achieve 5000 RPM cutting performance, easy to cut all kinds of hardwood. And triangle supports at the back of the metal stand improves the stability of the table saw. Besides, extensions on both sides of the table top also allows it to handle a larger piece of wood more stably.

[PORT FOR DUST COLLECTOR] Towallmark table saw is designed with port for connecting dust collector at the back, which can help create a cleaner working environment. And it is also designed with storage part at the left and right sides for storing wrenches and push stick when they are not in use.

Cut pen kit tubes to the exact size needed with this mini saw and jig combination tool by matching with an existing tube, or by using the integrated ruler

Accepts stock pen tubes up to 12.5mm in diameter

Includes (2) fine tooth circular blades, (1) tube holder clamp, (1) table clamp, (1) hex key, and all needed hardware

All swivel design allows for easy mobility and maneuvering of equipment in tight spaces

Foot operated locking levers hold the base firmly in place

Adjustable in one inch increments to fit most machines

Features a rip capacity of up to 25 inches for taking on 4x8 plywood and OSB sheets

Powerful 11-amp motor rotates the included 8.25-inch TCT 24T blade up to 4500 RPM

Adjust both the height and angle of the blade to cut boards up to 2.75 inches thick at 90 degrees and 2 inches thick at 45 degrees

【No Deformation】Multifunctional mini table saw is designed with 3 mm frame and aluminum alloy panel, and durable materials ensure flatness and precise cutting.

【Adjustable Speed】The motor speed of the table saw is 10000/min, the maximum saw blade is 125mm, the cutting depth can reach 35mm, and the power is strong. Portable table saw is equipped with a power adapter, allowing you to easily adjust the rotation speed to meet different cutting speeds.

【Multi-Angle Cutting Table Saw】This mini table saw for crafts 0-90° free cutting, sliding design, accurate and efficient work, easier and precise cutting, to ensure safety.

ADJUSTABLE BLADE ANGLE & HEIGHT: With hand wheel for blade height adjustment, the blade height of the table saw can be adjusted to meet your specific needs. What’s more, the blade angle can also be adjusted to provide 90°cross cutting and 0-45°bevel cutting. And it features 60T blade which can yield a smoother cut.

PORT FOR DUST COLLECTOR: The 10inch table saw is designed with port for connecting dust collector at the back (Note: It does not come with dust collector), which can help create a cleaner working environment. And it is also designed with storage part at the left and right sides for storing wrenches and push stick when they are not in use.

POWERFUL PERFORMANCE: The no load speed of the table saw is 5000RPM, which allows it to cut most wood with ease. And triangle supports at the back of the metal stand improves the stability of the table saw. Besides, extensions on both sides of the table top also allows it to handle a larger piece of wood more stably than those without extensions.

PREMIUM SAW – The Gryphon Abrasive Miter Saw makes premium cuts in thin wall extrusions of brass, zinc, steel and copper. The adjustable angle of cut, protractor scale, and durable design make this saw the best for any project.

CLEAN, QUICK CUTS – The ultra-thin, abrasive blade offers ultimate precision. The blades cuts cleanly and coolly, limiting flash. The chop saw design, built-in clamp, and safety shield ensure protection for the operator.

PERFECT FOR – The saw is used largely in the automotive field. Whether you're cutting or trimming tubing for a vehicle, this saw makes every project easier.

📌【YOU CAN GET】Mini table saw, weighing about 1.6kg/3.6lbs, small size, easy to carry; Comes with 1 metal blade, 1 resin blade, 1 wrench, 1 clamping jig and 1 user manual.

📌【PRECISE CUT】The included angle gauge allows cutting from 0° to 45°. The Mini Miter Cut-Off Chop Saw can precisely cut 1/2 inch deep with smooth and accurate cuts, no sanding required.

📌【POWERFUL POWER】The speed of the mini Power Table Saw motor can reach 7800r/min, and with the 2-inch high-speed steel blade, it can cut various materials in a very short time. Save time and effort, 10 times less time than manual work!

【Best Bench-top Saw Choice】- Accurate cutting saw tool for cutting metal, aluminum, lead, resin, fiberglass, copper, plastic and wood!

【Accurate Cutting Saw Tool】- Cuts to a depth of 1/2 in, ideal for frames, molding & other light-duty cuts. It has adjustable miter gauge, make miter cuts from 0°to 45°. Perfect for all your DIY projects.

【Main Parameter】- Maximum speed 7800 rpm and a 3/8-Inch arbor, 2-Inch blade diameter and 0 .02 inch blade thickness.

Power 90W,110V-120V AC,60Hz

Cuts Steel, Brass, Wood & More With Smooth, Precise Cuts; No Sanding Needed

0-45 Degree Miter, 71" Power Cord, Includes 2" Blade & Table Clamp

🔥Ergonomic Design & LED Light: The ergonomically designed handle is more suitable for long-term work, allowing one-handed operation. Non-slip handle to ensure lower vibration and comfort, and provide better grip. With LED work lights, to ensure that it provides sufficient brightness to work in a dark environment, it will not delay your work progress.

🔥Reliable and Safe: The brushless motor provides a no-load speed of 0-1900 RPM, which is characterized by powerful, controlled and high work efficiency. The speed of the tool can be locked by using the lock button, you needn’t to press the trigger switch all the time and can prevent accidental triggering, allowing you to use it more safely.

🔥Tool-Free Blade Change: Cordless reciprocating saws do not require other professional tools to replace the blades. It can quickly replace the blades with one hand, reducing downtime and improving cutting efficiency. With 4 replaceable blade saw, 3 wood saws, 1 metal saw. Suitable for metal/wood/PVC plastic, etc material. Wood Cutting Depth: 5.91"(150mm), Metal Cutting Depth: 0.32"(8mm), Plastic Pipe Cutting Depth: 3.94"(100mm).