Best Delmar Tools in 2026

ATTACHES TO 5 GALLON BUCKETS IN SECONDS - The Delmar Tools dust separator separates vacuum dust into a separate container, keeping your filter clean and your vacuum running for longer.

INCLUDED 90° ADAPTER AND HOSE - Unlike competitor versions, ours comes with a 90° adapter and included hose for various assembly options.

RUBBER GASKET AND TIGHT SEALS FOR MAXIMUM SUCTION - Each dust separator has a sturdy rubber gasket to provide the tighest seal possible to maximize the suction from your shop vacuum.

PATENTED PUSHBLOCK MAKES NARROW RIP CUTS ON THE TABLE SAW SAFER AND EASIER TO CONTROL- Make your table saw rip cuts down to a 1/4" wide smooth, easy, and safe! The Delmar Tools patent pending push block creates an adjustable width tunnel for the table saw blade to pass through under the push block on difficult narrow rip cuts as small as 1/4”. Gain complete control of both side of stock on your rip cuts.Helps reduce kickback while keeping your hands above and away from the saw blade.

THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!

USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for each cut.

FAST SCRUBBING POWER: Power scrubber tool designed to clean up to 2x faster than a manual scrubber

TIME SAVINGS: Oscillating head scrubs 60 times per second

WATER RESISTANT: Liquid resistant assembly for durability you expect from Rubbermaid

When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!

Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.

PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.

Ideal for sawdust collection and fume ventilation in woodworkng applications

Good abrasion and tear resistance

Excellent chemical resistance

NEW GENERATION: Addition of two tool outlets, no need extra extension socket, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, Off and On; The values are clearly displayed with LED indicators, each key for corresponding option, easier to check and set.

CONFIGURABLE ACTUATION THRESHOLD: 30W/60W, you can select flexibly appropriate actuation threshold according to your actual condition. Prevent vacuum from running too long or being unable to shut off after tool has stopped.

CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency.

When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!

Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.

PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.

When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!

Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.

PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.

[5-8 Gallon SHOP Vac Bags]: Fits Type E 90661, 9066100, 9066108, 9066111, 9066127, 9066133, Type H 90671 9067100 9067133 for using with 5-6-8 Gallon vacuum

[5-8 Gallon OTHER Vac Bags]: For Vacmater VHBS VDBS, Stanley 19-3100, Craftsman cmxzvbe38775, 38767; Dewalt dxva19-4101, Porter-Cable PCX18404P-6A. Multi-Fit VF2004 vaccum bags. Detail model number in A+description

[Compatible Shop Vac Accessories]: Work often with Shop vac filters Type U 90304 and ALYYDBG dust collector bags are suitable for most 4-10 gallon vaccum of hose port around Φ2.48"/6.3cm (4th and 5th pictures for reference)

NEW PATENT-PENDING 2.5 Dust Deputy model by Oneida Air Systems US Pat. 7282074 and patent pending.

DELIVERS 2X THE AIRFLOW of smaller lid-style and cyclone separators.

DESIGNED FOR TODAY’S LARGER, MORE POWERFUL, VACUUMS. Inlet and Outlets sized for common shop vacuum hoses! The Dust Deputy 2.5” hose cuffs makes connecting to your shop vacuum hassle free! Forget the days of tracking down odd sized dust collection fittings and shop vacuum adapters.

INCREASED SUCTION POWER - The original and still the best! Now 20% more efficient with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!

LONGER LIFESPAN - Prevents fine dust and large debris from reaching your wet/dry vacuum's filter, reducing the need for cleanings and prolonging the lifespan of your filter. The Dust Deputy DIY will save you money on expensive replacement filters and dust bags, and time, allowing you to focus on the task at hand.

WET OR DRY – This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2. 0" ports for secure fittings using a variety of dust collection hose sizes. Works with most materials: wood dust, drywall dust, concrete dust, clay/silica dust, blasting soda, cooled ash & soot, water, metal shavings, baking flour, grass & leaves, pet/animal hair, pharmaceutical waste, and much more!

INCLUDES: 4” Dust Collection Hose Y-Fitting Connector

FUNCTION: Connects 4” nominal ID dust hoses together to split to one or two machines, and then extend to other compatible machines. Please note: The nominal 4” OD Y-Fitting is designed to work directly with 4” ID Flexible Dust Control Hoses. To work with other 4” OD pipes or adapters, a union, such as POWETEC 70149 Flex Cuff, will be needed. Please see the listed photos and video.

FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 4” ID ports.

Genuine, OEM Dewalt Replacement Part

Dewalt replacement dust bags, part number 608354-00SV

Compatible with: 25708 Type 1, 27707 Type 1, 27708 Type 1, 2771 Type 1, DW421 Type 1, DW421 Type 2, DW421-B2 Type 1, DW421-B3 Type 1, DW421K Type 1, DW421K Type 2, DW422 Type 1, DW423 Type 1, DW423 Type 2, DW423K Type 1, DW423K Type 2

Includes (one) 4" diameter 20 feet long left spiral clear flexible hose

Made from high quality PVC for durability, strength and easy installation

Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability

When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won’t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!

Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.

PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.

CLEANS HARD-TO-REACH AREAS: Attach the wet dry vacuum extension wands to the vac hose to clean hard-to-reach areas without the use of a step ladder

EXTENDS REACH: Allows a user to extend the reach of the shop vacuum and clean the floor without bending or kneeling

INDUSTRIAL-GRADE CONSTRUCTION: CRAFTSMAN wet dry vacuum attachments are built to handle heavy use

INCLUDES: (1) Plastic Dust Hood featuring a Big Gulp 13” x 16” opening

APPLICATIONS: This catch all attachment collects a wide range of saw dust, debris and woodchips for an assortment of machines, including belt sanders, miter saws, table saws, lathes, drill press and planers without hoods

BUILD: Made with premium ABS plastic, this dust collector accessory is lightweight yet durable, anti-corrosive for in and outdoor usage, and offers high impact resistance for day-to-day wear & tear

INCLUDES: (2) 2-1/2 inch 45 Degree Elbows, (2) Y-Fittings, (3) Clog Resistant Blast Gates, and (20) 2-1/2” Keyed Bridge Hose Clamps

USE: This upgraded assortment of quick connect dust collector fittings and attachments lets you create your own three-machine dust collection network, extraction or cyclonic separator system

ADAPTABLE: Lets you quickly transfer and attach 2-1/2 inch ID dust collection accessories, tools and machines with 2-1/2” dust ports

Includes (one) 4" diameter 50 feet long left spiral clear flexible hose

Made from high quality PVC for durability, strength and easy installation

Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability

INCLUDES: (1) T-Fitting Dust Hose Adapter

FUNCTION: Gives you the ability to connect two separate machines (or two hoses from the same machine) directly to the dust collector main hose

BUILD: Featuring non-threaded, all-black ABS plastic construction, this dust hose fitting is designed for durability and built to withstand the wear and tear often associated with woodworking dust extraction.

INCLUDES: (1) 4 Inch 90 Degree Elbow Dust Collection Fitting

FUNCTION: Offers an airtight, 90 degree (right angle) connection to work seamlessly with your 4” ID dust collection hose, pipes and other fittings. Please note: to fit or accommodate a 4” OD dust collection equipment port, a rubber coupling, like POWERTEC 70148, Dust Control Flex Cuff will be required.

QUALITY: Possesses a rugged black construction for long term durability and is molded out of high quality ABS material to withstand the abrasive nature of common workshops and vacuum dust collector systems

Includes: 4” Blast Gate; Both ends have 4” OD outlet diameters and are designed to work with 4” ID dust hoses or other 4” ID ports

Specifications: Accepts 4” ID dust hose, port or vacuum fitting; 4" Nominal end measures 3-61/64” O.D. and 3-3/4” I.D

Compatibility: Will not connect directly to other 4” OD ports; please confirm that the actual listed size fits your application before ordering. If connecting to a 4” OD port, a Flex Cuff or similar device will be required

LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need for cleanings.

HIGH EFFICIENCY - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency.

SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. 4/5 Cyclone with included adapters offers 4 or 5" OD inlet (connects to your tools) and 4 or 6" OD outlet (connects to your collector). Approximately 23" height.

THE FASTER THE SPIN, THE MORE DUST THAT FALLS IN! -- Parabolic design and seamless one-piece construction create a faster airstream, more suction power and better capture efficiency than ordinary straight-wall cyclone-and-bucket assemblies.

RIGID, CUT-TO-FIT PVC CONNECTION -- Eliminates the Frankenstein-like assembly of bolts, bungees, and duct tape of other systems creating a unified, airtight connection and a vac filter that stays cleaner, longer.

UNIVERSAL VAC COMPATIBILITY -- Included Hose Adapters allow for easy connection to virtually all wet dry shop vacuums, dust extractors and their hoses. Red, orange, yellow or green; tall, short, big or small; Mullet is made to fit 'em all!

1-1/4" diameter x 16-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1”, 1-1/4”, 1-½” internal and external connections for dust collection

The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting

Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool

Professional Dust Collector: 100% vacuum effect with high power suction fan and reusable fine filter, this dust vacuum can adsorb and collect the nail dust and fly ash from 360 degrees efficiently. Giving you and your customer a free-breathing environment while filing or polishing nails. A must-have nail accessory for personal use or use in the nail salon.

Low Noise & Adjustable Suction: With a high-quality Turbo suction motor, this nail dust vacuum machine will keep in low noise, makes you more comfortable while filing. Equipped with a touch control induction panel, you can adjust the suction power between LOW and HIGH with just one touch.

Efficient Heat Dissipation: The large ventilation holes on the back with persistent heat dissipation function, make sure the nail dust fan collector will not get hot even doing the long-lasting work.

COMPATIBILITY: These 38737 shop vacuum filter bags compatible with CRAFTSMAN most 2 to 2.5 gallon shop vacuums and powerhead bucket vac.

COST-EFFECTIVE PACKAGE: Include 4 pack 2.5 gallon vacuum filter bags compatible with craftsman vac and 2 pack retaining band

HIGH QUALITY MATERIAL: These 38737 2 gallon filter bags is made of 55g spunlace non-woven fabric, designed for clearup of daily debris like dirt and dust around the house, car or truck dirt

1-1/4" diameter x 10-foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with ¾”, 1”, 1-1/4”, 1-½” internal and external connections for dust collection

The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting

Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, and bayonet fittings with ¾”, 1”, 1-1/4”, 1-½” soft TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool

iVAC PRO 115-Volt Remote Control For Dust Collectors

Includes (one) 5" diameter 10 feet long left spiral clear flexible hose

Made from high quality PVC for durability, strength and easy installation

Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability