Best Eanosic in 2026

The setup blocks can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.

Combine bars to setup 100's of measurements. Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly.

Set up gauge blocks are all 3 inches long. Accurate gauge block set sizes: 1/16", 3/32", 1/8 ",5/32" ,3/16" ,7/32" ,1/4" ,5/16" ,3/8" ,7/16", 15/32", 1/2", 23/32", 3/4", 1x2x3"

The setup blocks can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.

Combine bars to setup 100's of measurements. Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly.

Set up gauge blocks are all 4 inches extra long. Accurate gauge block set sizes: 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 1/2”, 3/4”, 1x8/7x4"

UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length

PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time.

The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.

Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length

PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide, it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time.

The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.

5PCS UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.

INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Up to 2.5X longer life compared to uncoated bits.

Professional Downcut Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.

INDUSTRIAL QUALITY DOWN-CUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Up to 2.5X longer life compared to uncoated bits.

Downcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The down-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and top, better than straight bits.

CNC ball nose router bits with 1/4 inch shank and 1/8 inch cutting diameter, 1/2 inch cutting length, 2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The Ball Nose CNC Bit is made of solid carbide. And Blue Nano Coated with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

Ball Nose CNC Bits are Suitable for side milling, end milling, finish machining, etc. For smooth contour 3D CNC milling and carving.

UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

UP and DOWN Solid Carbide spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 3/4 inch cutting length, 2-1/2 inch extra long for total length

SOLID CARBIDE AND NANO BLUE COATED: The compression spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits

5PCS Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Upcut spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 1 inch cutting length, extra long 3 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Downcut spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 1 inch cutting length, extra long 3 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The down-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and top surface, better than straight bits.

UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length (Extra Long)

SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

CNC spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

5PCS Upcut spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 1 inch cutting length, extra long 3 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Professional Compression Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.

INDUSTRIAL QUALITY SPIRAL FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coating. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Up to 2.5X longer life compared to uncoated bits. The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.

5PCS Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, extra long 3 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, extra long 3 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Professional Compression Flush Trim Router Bit with Bottom Bearing: 1/2” Shank, 1-1/2” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use.

INDUSTRIAL QUALITY SPIRAL FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide.Meets stringent industrial-grade quality standards to provide robustness, wear resistance and high cutting performance. Can be used in any flush trimming situation, making it an excellent choice for pattern or template work.

Sharper & More Efficient: The flush-cut spiral router bits is sharper and stay sharp longer than conventional flush trim router bits. Provide better chip evacuation, less heat buildup, and cleaner edges.

Downcut spiral router bit with 1/4 inch shank and 1/16 inch cutting diameter, 1/2 inch cutting length, 2 inch for total length

SOLID CARBIDE AND BLUE NANO COATED: The down-cut spiral router bit is made of solid carbide. And Blue Nano Coated with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and top surface, better than straight bits.

Extra long downcut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length

SOLID CARBIDE & NANO BLUE COATING: The down-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and top, better than straight bits.

Upcut spiral router bit with 1/4 inch shank and 1/16 inch cutting diameter, 1/2 inch cutting length, 2 inch for total length

SOLID CARBIDE AND NANO BLUE COATED: The up-cut spiral router bit is made of solid carbide. And Blue Nano Coated with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.

Extra long upcut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length

SOLID CARBIDE & NANO BLUE COATING: The up-cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches. Up to 2.5X longer life compared to uncoated bits.

CNC Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly downcut groove and slots, mortises, cycles and dados with clean edge and top, better than straight bits.

NON-MARRING PADS: Grip firmly and protect your workpiece from scratches and scuffs

QUICK-GRIP DESIGN: One-handed triggers release the clamps instantly

STURDY: Resin construction with hardened steel bars to prevent flexing and bending

This Digital Angle Gauge and Level can measure or set angles, check relative angles with zero calibration feature, or can be used as a digital level

High visibility reverse contrast display improves visibility in dimly lit work environments

Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces

[WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two

[CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer

[LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store

[WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two

[CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer

[LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store