Best Lldsimex in 2026

This matched pair of blocks is ground to tolerances of .0001". 23 holes, 5 tapped 3/8"-16 TPI and 18 plain

Precision ground and case hardened on all six sides

Squareness of all sides is within .0002 per inch.

Capacity 1/32" to 1/2"

Includes one keys

Taper Mount JT33 installs by friction on a tapered shaft of the drill press, no threads

Model Number: 250-001 Turing and Facing tool holder

Tool bits range: up to 1/2inch

Material： Steel

Parallelism：+/- .0002", Paired +/- .0002" in Height

Made of high grade alloy steel, hardened and ground. 2 holes in each parallel

Measurements: 6" long x 1/8" thick Hardness: 54-58 HRC

2-6 inch range

bore depth 6 inch

3pc washers and 11 pc Anvils (1 anvil installed in the bore gage probe and 10 pc in case slot)，No product for two slots is correct ！

Heat treated tempered tool steel for longer life

Wide set of transfer punches from 3/32" to 1/2" by 1/64"; includes 17/32" transfer punch，Length： 4.87 Inch

Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling operations

For Use Milling Machines & Drill Presses

High grade hardened steel

1/2 Table Slot And 3/8- 16 Stud Size

Includes Metal Indexed Storage/Organizer Case

Quantity: 1 - 60 Piece Titanium Nitride Coated Drill Bit Set

Sizes: #1 through #60 (0.228" - 0.040") wire gauge drills (for reference, the largest size #1 gauge bit is approximately 1/4")

1018 Steel,Black Oxide Finish

1/2-13 Threads, Table Slot Size 5/8"

Base Size (In.) 0.985"x1.120" , Height:0.609"

22PCS SETS IN PLASTIC BOXES

INCH THREAD 4-48(0.112"-48)

Anvil point set will fit most American and import indicators

M2 Material High Speed Steel (HSS)

Size Range: 1/16" to 1/4" by 64ths

Used with hand held manual drills and portable or stationary machines

1018 Steel,Black Oxide Finish

3/8-16 Threads, Table Slot Size 7/16"

Base Size (In.) 0.685"x0.76" , Height:0.489"

Aluminum Vise Jaws can use on any metal Vise for holding wood, metal, plastic, tubing, threaded item

2PCS Strong embedded magnets keep vice jaws in place securely

Special designed V-Shaped surface and ledge can hold and protect round or hex parts and support flat parts while clamping.

NO.250-101,Securely holds 3/16 - 1/2" square diameter tool bits.

For use with AXA tool post 250-100 or 250-111. up tp 12" swing.

Made of steel , not Aluminum.

For checking hole diameter and diatance between holes and hole location.

0.061''-0.250'' x 190 Pcs, size electro etched on each piece

Heat treated to a hardness of 60/62 RC

Equipped with a hand wheel to perform light and quick press work

Applies 1 ton of continuous force

Solid anvil surface for tough pounding and shaping tasks

25 Piece Transfer Punch Set 1mm to 13mm by 0.5mm

Length 4-7/8(125mm)

For checking hole diameter and diatance between holes and hole location.

0.251''-0.500'' x 250 Pcs, size electro etched on each piece

Heat treated to a hardness of 60/62 RC

Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness; Foldable feeler gauges, easy and convenient to take and store

Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification

Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88

Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring

4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery

Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. The buttons are made of rugged plastic carbon fiber composites, durable and portable

Perfect for machinists, woodworkers, metalworkers, and more

Each block measures 3 by 2 by 1 inches in size

Features 5 threaded 3/8-16 UNC cross-drilled holes

Made of precision-grade tool steel hardened and ground on all 6 sides of block

Heat treated and case hardened to HRC 57-62

Accuracy and squareness on all sides within .0002"

This matched pair of blocks is ground to tolerances of .0001". 23 holes, 5 tapped 3/8"-16 TPI and 18 plain

Precision ground and case hardened on all six sides

Squareness of all sides is within .0002 per inch.

Squareness: 0.0003"

Made of hardened Steel with hardness of 56 - 60 RC

Size within +/- 0.0002", matched pair accuracy 0.0002"

Accuracy: ±0.0001'' per inch. Furnished in 1 increments to 5, and in 5 increments to 30

For angle set-ups in tooling, productions, and inspection. Hardened and precision ground

Lightly magnetized for better holding. Size 3'' long x 1/4'' thick

[Design]: 23 holes includes 5 holes tapped to 3/8-16 and others untapped Cross drilling design allows for efficient use of lower weight with maximum strength,

[Product includes]: ,Five stainless steel socket head cap screws,One hex key; Fitted Case

[Application]: Perfect for machinists, woodworkers, metalworkers, and more

1/8" thick matched pairs. 6" length

Our most popular parallel set, this set includes 10 matched pairs with ultra-accurate dimensions

Made from high quality alloy steel

In good condition, no highlights or writing in book. Practically new CD included

Surface plates are checked by an auto-collimator for overall accuracy assurance.

Accuracy is 0001" Grade B(Grade 1).

Granite surface plates meet or exceed Federal Specifications GGG-P-463C.

Width of the V is 1-3/4.

Depth is 1-5/16.

Made of high quality casting, properly seasoned against distortion.