Best Hhip Pin Gauges in 2026

Replace missing, damaged or worn-out Class ZZ gages from existing sets and libraries

Each pin is individually marked with the size

Fully hardened to 60-62 RC

[Size]:0.061-0.250", minus tolerance: 0.0002", Length: 2"±0.01", Step: 0.001", HRC: 60-62,

[Features]: Each gage hole is clearly marked; pin gage is heat treated and size info is etched on each pin gage with no sharp corners;

[Product includes]: Storage case; 190pcs pin gages

Class ZZ. Size electro-etched on each piece

Tolerance: 0.0000" to +0.0002"

All members 2'' long, centerless lapped

[Size]:0.251-0.500", minus tolerance: 0.0002", Length: 2"±0.01", Step: 0.001", HRC: 60-62

[Features]: Each gage hole is clearly marked; pin gage is heat treated and size info is etched on each pin gage with no sharp corners

[Product includes]: Storage case; 250pcs pin gages

Use to grind and position thread cutting tool on a lathe

Hardened with lapped edges and notches

With 14ths, 20ths, 24ths, and 32nds thread checking scales

Reads 10-50 PSI accurately and effectively

Gauge bodies come in various colors: Black, blue, silver, orange, red and green. Order will contain one of these colors randomly

4-sided tongue measures psi, kPa and bar & Bleeder pin built into the tire gauge head

Our part # ALL-55100

Pin Gage Range: .011-.060" (MINUS)

Sizes marked on case for easy identification

[Material]: Made of steel which is not easy to rust and has a long service life.

[Size]: Range: 0.011-0.060"; Tolerance: 0.0002"; Length: 2"±0.01", Step: 0.001", HRC: 60-62.

[Features]: Each gage hole is clearly marked; The size info is etched on each pin gage.

Our Part # ALL-55102

Pin Gage Range: .061-.250" (MINUS)

Number of pin gages: 190

Works with 48V Lead-Acid Batteries in Golf Carts, Forklifts, Trucks, RV's, ATV's, UTV's, Scooters, Boats and More

Material: ABS

Waterproof,IP65

For checking hole diameter and diatance between holes and hole location.

0.061''-0.250'' x 190 Pcs, size electro etched on each piece

Heat treated to a hardness of 60/62 RC

High Precision and Accuracy - Pin Gages are used to gage bored features. It is especially useful for gaging the straightness of a relatively deep bore. They are used to test hole size and its geometry.

Easy to Use - Each pin is centerless lapped and is clearly etched with the stated size. All Starrett pin gages are manufactured to a 0.0002" tolerance and offered in 0.001" increments, it comes with an inspection certificate with every set.

Durable Construction - Sets are supplied in rugged, high impact protective cases with each space marked for the appropriate gage. It is color coded, fully adjustable Go/No-Go gage handle furnished with each set.

Pin/Plug Gage Type: Minus

Class: ZZ

Measuring Range: .061-.250

Sizes: 52mm (2-1/16"). Clock Gauge Requires 12/24 Volt Negative Ground Systems. Adjust the time with the switch button.

FEATURES: Designed for In-Dash. Simple Installation by Using Pin-Style Wiring.

FEATURES: Blue LED Illumination. Convex Lens with 304 Stainless Steel Bezel. With IP67 Waterproof, Rustproof, Anti-Fog & UV-Resistant.

SPECIFICATION: Standard 2" (52mm) dial for a 2-1/16" (52.4mm) opening required 12-volt negative ground systems.

FEATURES: Designed for 270 dial sweep in-dash; Swiss Stepper Movement, LED illumination (White & Amber), used the 304 stainless steel on the bezel, dial UV protection, certification for IP67, easy installation (using pin-style wiring).

PACKAGED: Oil pressure sensor(Thread size: 1/8 NPT), power harness, screw bracket, O-ring, installation manual.

MINUS Steel plug gages; Size: .061-.250"; Set qty: 190; Length: 2"; Accuracy: +.0000", -.0002"

Center less lapped with 10 micro finished

Uniform 2" overall length

Comfortable, easy to use and ergonomically made handle for pin gages.

Made from powder coated aluminum.

These handles can be used with a GO pin on the green end and a NO GO pin on the red or opposite end.

Steel plug gages

Size: 0.251-0.500" ; Set qty: 250 pieces

Length: 2" ; Accuracy: +.0000", -.0002"

Measuring Range: Ra (0.05-10.00 µm / 1.000-400.0 µinch), Rz (0.020-100.0 µm / 0.780-4000 µinch)

Fourwave filtering methods : RC, PC-RC, GAUSS and D-P

Accuracy:<=10%

Dedicated handle for pin gage, go-no go gage and plug gage. The quality of the product is guaranteed.

Optional clamping range 0.316mm. Which can meet your different needs.

Made of aluminum alloy material, with delicate appearance and long durability. A great choice for you.

【DEDICATED HANDLE】Our pin gage handle with dedicated handle for pin gage, go-no go gage and plug gage.

【CLAMPING RANGE】There are optional clamping range from 0.3mm to 16mm for you to choose.

【ALUMINUM ALLOY】The pin gage handle is made of aluminum alloy material, with delicate appearance and long durability.

For checking hole diameter and diatance between holes and hole location.

0.251''-0.500'' x 250 Pcs, size electro etched on each piece

Heat treated to a hardness of 60/62 RC

Dedicated Handle:Dedicated handle for pin gage, go-no go gage and plug gage.the double end handle is a necessary accessory of inspection tool for standardized inspection of holes

Multiple Sizes :We provide 10 different sizes of needle gauge handles for you to choose to meet your various needs.Optional clamping range 0.3-10mm

Exquisite Appearance :The pin gage handle with green and red color of each end,easy to distinguish,which is beautiful and convenient to use

Supplied in plastic, sturdy, dust-proof cases.

Sizes are marked on the cases for easy identification

Fully hardened to 60-62 RC

Steel plug gages; Size: .501-.625''; Set qty: 125; Length: 2"; Accuracy: +.0000", -.0002"

Center less lapped with 10 micro finished

Uniform 2" overall length

100% brand new and high quality.

Dedicated handle for pin gage, go-no go gage and plug gage.

Optional clamping range 0.3-1mm.