Best Findmall in 2026

Made of precision-grade tool steel hardened and ground on all 6 sides of block

Heat treated and case hardened to HRC 57-62

Accuracy and squareness on all sides within .0002"

Size Information: Folding Height: 2.78ft*1.6ft*0.3ft/2.9ft*1.6ft*0.3ft/3.18ft*1.6ft*0.31ft ; Opening Height: 10.5ft*1.6ft*0.3ft/ 12.5ft*1.6ft*0.3ft/14.5ft*1.6ft*0.31ft ; Load Capacity: 330Lbs, Weigh: 19 Lbs/21.6Lbs/28.9Lbs. Small size after folding, the rear compartment/locker can be stored freely.

Material: Made of aluminum alloy, it is waterproof, corrosion resistant, high strength, portable and durable.

Advantages: One Button Retraction: With an inward sliding latch, you can adjust the steps in steps of 1 foot increments without need any laborious, that you can retracting any height you need.

Size Information: Folding Height: 2.78ft*1.6ft*0.3ft/2.9ft*1.6ft*0.3ft/3.18ft*1.6ft*0.31ft ; Opening Height: 10.5ft*1.6ft*0.3ft/ 12.5ft*1.6ft*0.3ft/14.5ft*1.6ft*0.31ft ; Load Capacity: 330Lbs, Weigh: 19 Lbs/21.6Lbs/28.9Lbs. Small size after folding, the rear compartment/locker can be stored freely.

Material: Made of aluminum alloy, it is waterproof, corrosion resistant, high strength, portable and durable.

Advantages: One Button Retraction: With an inward sliding latch, you can adjust the steps in steps of 1 foot increments without need any laborious, that you can retracting any height you need.

2" Easy Strip Premium Blue (Extra Coarse) Non-Woven, Nylon Webbing

Cleans Welds, Polish Rust, Paint, Scaling Effortlessly

For use on wood, metal and fiberglass

Specifications : 8-in spool, 2-in center hole , Thickness :2.15in , Dia :0.035/0.030in (1.0mm/0.8mm) , Weight :10.38lbs / 4.71kg

Base Materials : ASTM A36 Gr.all; A123; A179; A181 Gr.60, A266 Gr.1

Features: Self-shielded; no welding protection gases needed. Single-pass fillet and lap welding. Wrapped in vacuumed aluminum foil.

Specification: Measurement in SAE (inch), measuring range is 0-6", accuracy is ±0.001", resolution and repeatability is 0.0005", accurate measurement

Material: Finely polished stainless steel frame with knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use

Purpose: Dial Caliper with two sets of jaws and a probe can be used to measure inner and outer diameters, depths and steps

Material: Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

Structures: Designed with thickened swivel pad, which can effectively prevent scratches and ensure solid clamping that helps clamp a variety of shapes without deformation.

Feature: A easy turn-screw adjusts the size and pressure to give you a strong clamp while you work.

Size and Quantity - Measures 1-3/4 in. in length by 0.092 in. in diameter and comes in a 3600 pack.

Structural Features - Full RoundHead and Ring Shank.

Material - HDG Steel.

Size and Quantity - Measures 2-1/4 in. in length by 0.092 in. in diameter and comes in a 3600 pack.

Structural Features - Full RoundHead and Ring Shank.

Material - HDG Steel.

Material - Rubber bumpers, aluminum body to deliver strength for gripping different kinds of objects.

Features - Head rotates 360° and tilts 45°, which is very convenient to turn in any direction after mounting. It provides the best angle for your work.

Design - Clamps onto surfaces up to 2" thick for general purpose and light-duty work.

4 inch 360° Double locking swivel base

The bench vice has a powerful clamping force and can fix workpieces very securely. Clamping force: 7KN(700Kg)

Easy to use without external force, manually tighten the handle can work easily

For use with AXA tool post 250-100 or 250-111

Completely sealed for maintenance free operation

Securely holds 3/16 - 1/2" square diameter tool bits

Steel Structure - Heavy duty steel construction, hardened steel gears, gear ration: 4.1 : 1. High carbon steel gears to resist wear and last longer, superior corrosion resistance and mooring hook equipped with a safety pawl. This winch is solidly constructed with steel wire rope. Diameter of rope: 4.2mm/0.16inch. The cable of the crank winch measures 8m/26.2ft long.

Capacity - 600 lbs pulling capacity, Designed to provide excellent load lifting facility, solution for a wide variety of applications.

Size - Body size (L x W x H): 11.8 x 8.2 x 12cm/4.6 x 3.2 x 4.7" (Approx), small portable size that won't take up much space when use.

Voltage Output: 36V DC, Current Output: 5A DC

Voltage Input: 110V-120V AC

Input Plug: US Plug. Charger Plug: No Plug

Double Acting - 2 Spools monoblock for double acting cylinders.

Durable Quality - This hydraulic directional control valve comes with 2 spool, with cast iron construction for long-time use.

Features - Open Center 4-way 3 position Tandem Spring Center.

Double Acting - Hydraulic control valve for operating double acting cylinders.

Durable Quality - This hydraulic directional control valve comes with 5 spool, with cast iron construction for long-time use.

Spring Return - All spools are standard double acting with spring return to the neutral position which is ideal for double-acting cylinders.

2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2"

Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50

Center Distance bt 2 bottom hole: 0.60"

Specifications : 5 inch(13cm) X Hook Loop Sanding Discs Orbital Sander paper Sheet Pad. The 100 piece ( 60 80 120 180 240 320 ) Grit Quick Change Sanding Discs in yellow.

Material : Premium Aluminum Oxide grain with flexible "C" and durable "D" weight paper backing. Wide open coat & stearate resin to reduce clogging, extend longevity, and improve efficiency

Advantages : Prevent clogging, anti-static, good flexibility, wear resisting, that provides outstanding life

Product - Wedge Style Quick Change Tool Post 6Pc, 250-111.

Material - Made of steel; All working parts precision ground and hardened.

Design - Rigid wedge tool post design, easily centered.

360 Degrees Rotation - The head of the vise can be rotated by 360 degrees for extra versatility, and the swivel base of the vise allows for optimal work placement and flexibility.

Sufficient Clamping Capacity - The built-in jaws are grooved for enhanced grip and allow for easy clamping of pipe and other rounded material.

Heavy-Duty Construction - Made of ductile iron which increases the durability and longevity, this table vise is designed to be used in a tough environment.

360 Degrees Rotation - The head of the vise can be rotated by 360 degrees for extra versatility, and the swivel base of the vise allows for optimal work placement and flexibility.

Sufficient Clamping Capacity - The built-in jaws are grooved for enhanced grip and allow for easy clamping of pipe and other rounded material.

Heavy-Duty Construction - Made of ductile iron which increases the durability and longevity, this table vise is designed to be used in a tough environment.

Steel body & chrome vanadium gear flex-head double ended combination ratchet spanner set - Open ended and flex-ratchet ring heads

180° pivoting flex head with 5° gearing for reducing fatigue and easy control

Precision-machined 12-Point box end and 72 teeth ratchet mechanism

Specification: The size of the product is 8" (200mm)/12" (300mm)/6" (150mm), accuracy is 0.0002"/10" (0.02mm/m)

Matetrial: Made of premium carbon steel has high hardness and long service life

Design: The large bubble design has accurate measurement, stable performance and high sensitivity

Specification: The size of the product is 8" (200mm)/12" (300mm)/6" (150mm), accuracy is 0.0002"/10" (0.02mm/m)

Matetrial: Made of premium carbon steel has high hardness and long service life

Design: The large bubble design has accurate measurement, stable performance and high sensitivity

Spring loaded with locking knurled knob. Range: 5/16" - 6" (8mm to 150mm)

Stainless Steel Construction, Titanium coating finish

Rigid handle and double action design (self-centering) for quick checking of inside measurements

Material - The roll nails are made of galvanized materials and are not easy to rust.

Structural Features - 15-Degree Ring Shank.

Size - Measures 3/4 inch in length by 0.120 inch in diameter.

Product - Workshop-grade set features 10 individual steel blocks of various angles.

Includes - 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30-degree hardened-steel blocks.

Features - 0.25 thickness; Hardened steel material; Precision grinding; +/- 20 Seconds, 0.0001 per inch high precision.

Dimension - 2-3/8 x 2-3/8 x 2 --- 90 degree v-block pair with clamps.

Material - Made of hardened steel,Hardness: hrc 58 to 60.

Square and parallel to accuracy - 0.0002.

Up for sale 12pcs ER20(1/8"-1/2") Spring Collet Set for CNC milling Lathe Tool & Workholding Engraving machine!!!

MATERIAL: High Grade 1065 Carbon Steel

Run-Out Tolerance: 0.015MM (0.0006")

New ER32 Super Precision 14 PCS 1/16"-3/4" ER-32 Collets Set With 3/8 7/16 1/2

MODEL: ER32 Precision Collets

MATERIAL: High Grade 1065 Carbon Steel