Best Miller Electric Gas Welding Regulators in 2026

Allows removal of empty cylinder for refill without interrupting propane supply

For RVs with dual propane tanks; Automatically switches from primary to reserve tank when primary is empty

Pairs well with our 48 Inch Thermo Plastic Hose, item 100383-48.

Brand New BETOOLL Argon / CO2 regulator and flow meter.

Flow Meters are more accurate than the flow gauge regulators.

The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.

For hand-operated sockets with square drive as per DIN 3120, ISO 1174, with ball locking device

With bit adaptor no. 620 also suitable for 1/4" bits

Easy access to deep-fitting screws in confined areas

Product Updated: BETOOLL argon regulator comes with a 6.6Ft 5/8-18RH Male hose, keep a safe distance between tank and soldering project.

CGA580 Connection: The argon flowmeter is fits standard CGA - 580 Gas Tank. Compatible with many gases, including CO2, argon, helium, etc.

Pressue Gauge: The argon gas regulator is equipped with pressure gauge, which show the pressure of gas cylinder range from 0 to 4000 PSI.

Gas Service: Oxygen

Delivery Range (psig): 150

CGA 540 Connection: Oxygen

CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots

Nitrogen Regulator, Delivery Pressure 0-4000 PSI.

Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system)

Oxygen connection: CGA-540

Acetylene connection: CGA-510 (Not for use with smaller 'B' or 'MC' tanks)

"B" Fitting (9/16" - 18) Outlet Connection

Argon/CO2 Regulator For Welding: Zistel Argon Regulator is a ideal choice for professional TIG/MIG welding applications, which can be used to reduce and control pressure levels.

Argon Flowmeter With Pressue Gauge: Our argon flowmeter is equipped with pressure gauge, allowing you to view how much gas is left in the tank range 0 to 3500psi.

CGA580 Inlet Connection: Zistel pressure regulator is suitable for standard Argon /O2/N2 Tanks with CGA-580 Inlet Connection. You can connect the welding hose via female 5/8UNF-18RH fitting.

Designed for light and medium MIG and TIG applications

Provides accurate flow of gas

Dual scale-gauge with impact resistant polycarbonate lens and machined brass body for maximum durability

CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port.

PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank.

RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability.

INLET ✔ CGA580 Bottle Connection for argon and argon, CO2, and helium blend bottles

OUTPUT ✔ Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting- 1/4" Hose Barb Adapter Included

WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail.

⭐Argon hose made of high-quality rubber materials, environmentally friendly, non-toxic, harmless to the human body, high-quality toughness, high pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather

⭐Sophisticated workmanship, the CO2 Flow Meter Regulator Hose can withstand the maximum working pressure of 290psi and the burst pressure of 800psi

⭐The argon gas regulator hose suitable for argon, argon/carbon dioxide mixture, helium, suitable for various TIG and MIG welding machines

SIMPLE AND SAFE CONNECTIONS ✔ The industry-standard CGA-580 inlet fits all Nitrogen, Argon, Helium, and Inert Gas Tanks. The 1/4" SAE Male Flare Outlet Connection features 7/16-20 threads for easy hook-up to your HVAC gauges, shock absorber chucks, and more!

CONSTRUCTION ✔ Solid brass, full size regulator with clear, easy to read, single-scale 2” gauges covered with rubber protectors, keeping them safe from bumps and dings on the jobsite.

HIGH PRESSURE, ACCURATE DELIVERY ✔ Input: 0-3,000PSI (Gauge reads 0-4,000PSI) Output: adjustable - 0-600PSI (gauge reads 0-800PSI.

➤Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering

➤Accurate Pressure Gauge: Nitrogen regulator hvac, there are two Easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of Max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure.

➤Connections: Helium regulator, CGA-580 Inlet Connector, fits all Nitrogen, Argon, Helium, and Inert Gas Tanks, 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads for easy installation

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet)

2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube.

3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments.

Durable Material: This regulator’s body is made of high-quality brass, which has high strength, high toughness and corrosion resistance, and strictly tested to ensure long -term use

Precise Control and Measurement: This regulator equipped with a flow meter and pressure gauge; Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFH; The pressure gauge ranges from 0 to 4000 PSI and is used to read the amount of gas remaining in the tank

CGA-580 Tank Inlet: The regulator fits standard Argon and CO2 gas tanks with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port

***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators; Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses.

***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI

***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI

This CO2 gas mig regulator is designed for professional TIG/MIG welding applications.

CGA-320 Connection for CO2 bottles.

The output flow is adjustable from 0- to 25 lpm. And is indicated by a ball which moves up and down in the flow tube.

Inlet Connectors, (Tank Connectors): Oxygen CGA-540 / Propane CGA-510

Oulet Connectors, (Hose Connectors): 9/16" - 18 R&L Type B-B

Uses: Oxy-Fuel Welding/Oxy-Fuel Cutting

Use of dry nitrogen gas also minimizes the need to evacuate moisture from the system

Process for this regulator is Oxy-Acetylene Components

For use on high capacity and HVAC applications

100% Brand new YaeTek Flowmeter which is great for Mig Tig Welding.

This kind of Flow Meter is more accurate and more reliable than the flow gauge stlye regulators, it does not use a diaphragm.

Outlet of the Flowmeter will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It comes with a standard 1/4" barbed fitting. Pressure Range: 0-3500 PSI

INLET ✔ CGA580 Bottle Connection for argon and argon blend bottles

OUTLETS ✔ Female 9/16" x 18 nut or 5/"8 UNF-18RH - Hose Barb Adapters that fit both 1/4" to 5/16" hose are included

WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail.

【WIDE COMPATIBLITY】 -- 1/2" natural gas regulator for grill can be used for LP fire pit to NG, gas NPT natural. The pipe fittings for this regulator are based on NPT pipe threads - dimensions according ANSI/ASME B1.20.1 standards.

【PREMIUM QUALITY】 -- Natural gas pressure regulator is made of high quality metal material, to ensure long-lasting and durable to use and protect from leakage for safety.

【EASY TO INSTALL】 -- Just install the regulator properly with gas flowing as indicated by the arrow on the casting, also with gas line pipe thread tape for convenient operation.

MORE PROFESSIONAL AND VERSATILE FLOWMETER - As a professional flow meter regulator manufacturer, HZXVOGEN offers this flow meter which fits Argon, Co2 and Argon/Co2 fixed, Suitable for most argon tanks,argon hose for Miller, Lincoln and other tig mig welders. This flowmeter is also perfect for home-made kegerator, home brew system, etc.

STUDY AND ACCURATE - There is cfh for both argon and co2 on the flow tube.The output flow is adjustable from 0 to 25 lpm. And is indicated by a ball which moves up and down in the flow tube. Simple to use and easy to read output

NO LEAKS, SUPER EASY TO ADJUST - All the hardware of this flowmeter regulator was tight and passed the leak test.You can easily turn the adjustment knobs by hand. Very easy to use every time

【Function】: Designed for MIG & TIG applications and provide accurate regulation of gas flow.

【Dual Gauges】: 2" dual-gauges for easy reading, also can help to adjust the outlet pressure in high precision.

【High Accurate】: Accurate measurement of gas. Argon gauge 0 to 4500 PSI.

Designed for MIG & TIG applications and provide accurate regulation of gas flow.

Argon gauge 0 to 4500PSI.

2" dual-gauges for easy reading.

Wide Application：Has CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2Tanks. Ideal choice for MIG TIG welding, chemical and electronics industry

Accurate Gas Flow Gague：The Square flow tube reads from 0 - 60 CFH, which is indicated by a ball which moves up and down in the flow tube.And has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI. Easy to read, accurate

Multiple Outlet：Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting

🚀RELIABLE QUALITY:Our oxygen regulator meter's body is made of high-quality brass, which can withstand harsh environments.

🚀SPECIFICATIONS: Inlet pressure range 0-4000 psi; Outlet pressure range: 0-100 psi;Units of measure: kPa and psi.

🚀CGA540 INLET Connection:Suits for most items

Fine thread 3-1/2" X 11TP 1 X 6-7/8"

Griftan safety cap can be used for transportation with the valve closed.

Fits 3-1/2 Inch Collar

Argon Regulator for Shield Gas in TIG and MIG Welding

Gas Service: Argon, Argon/CO2 Mixtures, Helium - Inlet Connection: CGA-580

Three Outlet Connection Options: 9/16" Male, 5/8" Female and Hose Barb