Best V Blocks in 2026

STYLISH, SPACE-SAVING STORAGE – The universal knife block: It’s a simple and sophisticated solution to knife storage. Store and protect 16 knives of any shape and size, thanks to the flexible plastic rods that won't ever dull the blades. Finally, you can store your knives in style with Kitchen Seven.

STORE EVERY KIND OF KNIFE – From sizeable chef knives to petite paring knives, this kitchen knife block stows them all. The 3.8 in. by 3.8 in. top tier is perfect for knives up to 8 inches long, while the bottom tier (3.8 in. by 1.1 in.) stores your 5-inch steak knives.

BENEFITS OF BAMBOO – Hand-finished Brazilian bamboo case blends seamlessly with any kitchen decor. This knife holder block is built to last a lifetime since bamboo is naturally resistant to wear and water. Plus, bamboo is eco-friendly and sustainable.

Made of precision-grade tool steel hardened and ground on all 6 sides of block

Heat treated and case hardened to HRC 57-62

Accuracy and squareness on all sides within .0002"

This matched pair of blocks is ground to tolerances of .0001". 23 holes, 5 tapped 3/8"-16 TPI and 18 plain

Precision ground and case hardened on all six sides

Squareness of all sides is within .0002 per inch.

Compatibility:【Front Axle Nut Covers 】It is front axle nut caps compatible for Harley Davidson Softail 2007-later (except Springer, Rocker),Touring 2008-later and Trike models,Dyna 2008-later,Sportster 2008-later,VRSC 2002-2011 models (except V-Rod Muscle and Street Rod).

Excellent Craftsmanship:【2 Screw Holes,Does Not Fade and High Light Perception】The axle nut covers are 2 set screws and it can hides on your bike perfectly.It can catch light and reflect the light.It will like a noble prince under the sun. Don’t worry about it can make you down.

Easy Installation:【With Mounting Hardware】Does not require additional components.You can install and remove easily.Install firmly, will not fall.

Squareness: 0.0003"

Made of hardened Steel with hardness of 56 - 60 RC

Size within +/- 0.0002", matched pair accuracy 0.0002"

Designed to accept standard 5” (125mm) sanding discs

Hook and loop prevents sandpaper from slipping and provides comfort

Four interchangeable sanding profiles for concance, convex, v-groove and flat surface sanding

Accuracy: ±0.0001'' per inch. Furnished in 1 increments to 5, and in 5 increments to 30

For angle set-ups in tooling, productions, and inspection. Hardened and precision ground

Lightly magnetized for better holding. Size 3'' long x 1/4'' thick

Pinch terminal distance is 5 mm/ 0.2 inch; Color: green

Rated value: 300 V 10 A; 2 Pins

Screw terminal block material: plastic and copper

✅【Powerful Stainless Steel Pulley Block】Each V Type Single Wheel Pulley Block has 4 mounting holes and the diameter of each hole is 7mm, which fits for 3-12 mm width flat belt. It can be mounted on various walls, wood and metal. (Equipped with 8 pcs self-tapping screws and 8 pcs yellow expansion pipes.)

✅【Superior Groove Wheel】The Single Wheel Lifting Rope Pulley Block is made of high quality stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 800 pounds.

✅【Super Mute Duplex Bearing Design】The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works.

Insulated flame-retardant shell: these block connectors adopt flame-retardant PP material shell, which feature with insulation, corrosion resistance and wear resistance; They can stand temperature between minus 40 to 150 degrees Celsius, have nice electrical conductivity

Crimping performance: the plated zinc alloy screws and copper-plated zinc alloy terminals have excellent stability and conductivity, can serve you for a long time

Easy to install: you just need to strip the wires, and insert them into the terminal strip and tighten the screws, no need for troublesome welding; What's more, you can use scissors or other tools, cut the screw terminal block become small parts as you need

Type: V Type Single Wheel Pulley Block; Quantity: 1 piece

Each pulley comes with 4pcs 6*40mm self-tapping screws and 4pcs 10*60mm yellow expansion pipes.

It can be mounted on wood, walls and metal. Can be used for home fitness or outdoor work.

Aftermarket replacement parts conceal your front axle hardware for an exclusive skull look

Easy to install, Give the front axle a nice touch that said an improvement over the stock axle exposed

Kindly Remind: Please check the measurement before order, You may have to modify both sides to fit your axle, a spacer might required for smaller axle nut

Width of the V is 1-3/4.

Depth is 1-5/16.

Made of high quality casting, properly seasoned against distortion.

1 5/8" X 1 1/4" X 1 1/4"

1" capacity

Numbered and matched pairs are precision ground for accuracy.

Accuracy with squareness on all sides within .0002" per inch

Heat treated and case hardened to HRC 55 to 60

Cross drilling design gives minimum weight and maximum strength

Made of high quality stainless steel,super wear-resisting,strong and durable.

Fit for 3mm-10mm wire rope,climbing rope or twine.

Mute pulley,no noise,smooth and effortless.It can be mounted on wood,walls and metal.

Width of the V is 2-1/4.

Depth is 1-5/8.

Made of high quality casting iron, properly seasoned against distortion.

Kit Includes 2 pairs 1-1/4" x 1-1/4" x 1-5/8" & 1-1/2" x 1-1/2" x 2"

V-Blocks made of chrome steel and hardened to Rockwell 60C and ground.

All sides are ground square and parallel to each other.

【Reliable quality】: made of pure copper with red and black mark and bakelite insulation material, with good electrical conductivity and perfect safety performance.

【Better safety】:Bakelite insulation material, oxidation resistance, long service life.

【Easy to install】:2 sets of nut systems make it simple and flexible to extend, tighten and assemble the connector.

Compatible with Harley Dyna 2008-Newer, Electra Glide 2008-Newer, Fat Boy 2007-Newer, Forty Eight 2010-Newer, Heritage Softail 2007-Newer, Road Glide 2008-Newer, Road King 2008-Newer, Street Glide 2008-Newer, Iron 883 2008-Newer, Sportster 1200 2008-Newer, Tri Glide 2008-Newer, Softail 2007-Newer (except Springer, Rocker, Rocker C, CVO Deluxe, CVO Breakout, FXST- Aus, Softail Deuce), VRSC Models 2002-2011 (except V-Rod Muscle and Street Rod)

Excellent Performance: These high quality axle nut covers can protect front axle hardware from dirty, moisture, dust and other outer damages; conceal front axle hardware for a clean custom look

Unique Design: This front axle nut caps has designed a variety of unique skull patterns, adding attractive and innovative new models to your motorcycle

Close Grain Cast Iron Material

Machined square and parallel

90° Centered and True Vees

Capacity: 1" diameter stock

Height: 1-3/8"

Width: 1-5/8"

Dimension - 2-3/8 x 2-3/8 x 2 --- 90 degree v-block pair with clamps.

Material - Made of hardened steel,Hardness: hrc 58 to 60.

Square and parallel to accuracy - 0.0002.

304 STAINLESS STEEL MATERIAL: This v tape single wheel pulley block is durable, strong, reliable, waterproof, anti-high temperature and rustproof, outdoor use can also prevent pulley corrosion.

STRONG LOAD CAPACITY: The thickened steel plate bracket and wheel core can enhance the bearing capacity. A single pulley roller can carry 660Ib/300kg.

INTERNAL DOUBLE BEARING: There are two carbon steel ball bearings inside the wire rope pulley, The practical bearing can reduce the friction of the wheel. with the wheel, so it can be used more smoothly and flexibly, can achieve great mobility and has no noise.

Acc BS 3731 Grade 2

55-60 HRC Hardened Steel

Block Length: 2"

Pair of cast iron v-blocks

Length: 3" ; Width: 1-5/16" ; Height: 2-3/8" ; "V": 1-3/4"

All sets are matched ; Used as a support for round stick ; High quality castings, properly seasoned against distortion

304 Stainless Steel Steel Pulley Block: V Groove Wheel was made of high quality 304 stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 880lb.

2 Pack V Groove Wheel: Each V Type Wheel Pulley Block has 4 mounting holes, It can be mounted on various walls, wood and metal.

Easy To Installation: The pulley is designed for easy installation. You just need to mark the hole location, drill 4 holes with a drill bit in the wall and insert the yellow expansion pipes in the holes, finally, fix the pulley with the self-tapping screws.(Screws and expansion pipes are not included)

2 Pc Solid Precision 30-60-90 Degree Angle and 45-45-90 Degree Angle Plates

45 degree angle plate size: 3'' x 3'' x 4-3/8" ; 30 degree angle plate size: 4'' x 3-15/32'' x 2"

High Precision: +/- 20 Seconds, 0.0001" per inch

SP1STOPMALL Cast Iron V Block Set

Made of high quality casting, properly seasoned against distortion.

Supplied in a matched pair

★Stable & Reliable: The inside of the terminal strip is composed of electro galvanized alloy screws and copper zinc alloy terminals, which have good conductivity and stability.

★Insulated Matelril: These block connectors adopt flame-retardant PP material shell, which feature with insulation, corrosion resistance and wear resistance. The high temperature resistance of the terminal strip can reach 90℃.

★Custom Design: To meet your wiring needs, the terminal strip supports arbitrary cutting. You can cut the terminal strip into different sizes with scissors or knives according to your needs.