Best Hy Huanyang in 2026

IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized).

This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.And can be used as a motor speed control and a phase converter.Work well with the Mach 3 controller

This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc).The input is 1 or 3 phase.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input

【Connection way】Connect the 110V input wire to any 2 terminals in the RST.The motor wire is connected to the UVW terminal

【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

【Connection way】Input：110VAC(+/-10%) single phase (connect the input wire to any two terminals of the RST） .Output：3phase 110v. Frequency：0-50hz/60hz. 0-400hz

【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【Features】With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.support fast accelerate/deccelerate with external optional braking resistor and external potentiometer,and

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

IMPORTANT NOTE: ●this VFD is ONLY applicable to three phase asynchronous motor●Dont support external resistor(the function needs to be customized by notifying the seller before purchase).●Fan runs all the time even though the motor stop.●If your motor is heavy load, pls choose a higher horsepower vfd than your motor's or contact sales for model selection suggestion●If your motor is 50/60hz, you need to change the Hertz parameter of the VFD to be consistent with the motor

input：1 or 3 phase 220v . Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD

【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.

【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.

【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.

【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust performance.

【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision and is not easy to break the knife, increasing the stability of the working process. Dynamic balance technology can effectively reduce noise during use.

【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a better heat dissipation effect to ensure smooth operation.

【Connection way】The package only supports 220VAC(+/-5%) 1/3 phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）

【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product

【Package Include】1 x 220V-2.2KW VFD, 1 x2.2KW Φ80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.

IMPORTANT NOTE: this VFD is ONLY applicable to three phase asynchronous motor and NOT support external resistor(this functions need to be customized). If your motor is heavy load, pls contact sales for model selection suggestion.

this new series has better performance and stability and adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.The input is 1 phase

Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting.Work well with Mach 3 controller

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【 Rich function】GT series adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation.Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting.Work well with Mach 3 controller

【Multiplex terminal】Unlike other inexpensive VFDS, this VFD has two sets of terminal functions,Rich of digital and analogy control terminals for versitile control,optional MODBUS (RS485) extension,diversified parameter setting

【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）

【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product

【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.

【Connection way】The package only supports 220VAC(+/-5%) 1/3 phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）

【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product

【Package Include】1 x 220V-2.2KW VFD, 1 x2.2KW Φ80mm 24000RPM ER20 Spindle.1 x 220V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.

【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）

【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product

【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【Features】With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency,and supports remote external potentiometer control

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor（pin1=U,pin2=V,pin3=W,pin4=ground）

【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product

【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【Features】With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency,and supports remote external potentiometer control

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz

【Feature-rich】Support external braking resistor and potentiometer, Support external braking resistor .supports mcah3 function and RS-485 communication

【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.

IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized).

Input:110V 1 or 3 phase ；Output:110V 3 phase(110V motor is required)

This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.This VFD inverter can be used as a motor speed control and a phase converter.Work well with the Mach 3 controller

Package include - 120 pieces sanding bands in 3 diameters: 1/2", 3/8" and 1/4", 40 pieces per size; and 12 pieces shank sanding drum in 3 diameters: 1/2", 3/8" and 1/4", 4 pieces per size; total 132 pieces set

Essential accessory - 120 grit commonest and standard size sanding bands use for smoothing surface and curved edges, polishing both soft and hard materials, like home improvement, artwork and woodworks

Easy installation - drum mandrels with self-expanding rubber cushion, making the sanding bands close to the manderl firmly and acheiving better finishing; in case the sanding band fall apart from the mandrel while using, please make sure the drum have been screwed tightly and wear closely to the sleeve

Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM

Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor

Attach the dust collector of your choice to the onboard dust port to minimize clean-up

INCLUDES: (1) Abrasive Cleaning Stick 8-1/2" x 1-1/2 " x 1-1/2" Large Size

FUNCTION: Extends the lifespan of your sanding disc, belts and other sander equipment by removing sawdust, pitch, gum, glue and other residue without damaging the grit

PREMIUM: Made with a professional grade all-natural rubber construction, this sanding eraser is designed for durability and comes with an extended length and sizable girth to take on most of your sandpaper cleaning jobs

Comfortable To Hold: POLIWELL detail mini sander sanding fits snugly under your index finger, tough polyurethane foam (PU) made, soft, light weight and good feels on hand. This little sander can flexibly get into tight spaces and do larger areas quickly. Your hand won’t get tired

5 Different Grit: Made by high performance aluminum oxide, 80, 120, 180, 240 and 400 grit sandpaper from coarse to fine, for rough sanding, medium polishing and smoothly finishing. Have grit marked on the backing side of sanding sheets, easy to distinguish the grit

Simple & Easy: It's the perfect size for any project, in small and hard to reach spaces, and it's always within reach on every project. Great for detail sanding, smaller crevices and sanding in tight spots and corners.

Includes six 80-grit sleeves, six 120-grit sleeves and six 240-grit sleeves

1/2 in., 3/4 in., 1 in., 1-1/2 in., 2 in. and 3 in. spindle sleeve for each grit

Perfect for material removal, resurfacing and more

Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc

Belt tilts anywhere from 0 to 90 degrees

Sturdy cast iron base prevents any heavy vibrations

Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt

Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM

The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke

Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc

2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc

Sturdy heavy-duty base prevents walking and wobbling during operation

POWERFUL - With a 1. 2 amp motor and 13,500 orbits per minute, it's able to deliver a smooth performance over a variety of sanding applications.

VERSATILITY ON THE QUICK - This 4-in-1 detail sander comes with an additional 3 detail attachments for fine finishing large surfaces corners/edges and any surface contour. These attachments are easy to change with no tool needed.

TOUGH ON DUST - Between its micro-filtration system and the 1-1/4" dust port for vacuum attachment you can choose your preferred way to keep dust away.