Best Jinyuan in 2026

【Fireproof PBT material】Made of environmentally friendly fireproof PBT +PC material, this fuse box meets all the standards of fine fuse boxes, with high strength, good insulation, heat resistance and flame retardancy.PC dust cover design can play a dustproof, splash-proof, so it can extend the service life of the fuse box

【Best Conductivity】 12-way fuse block for ATC/ATO (medium size) fuses with positive and negative terminals. This means that there is a negative terminal for each positive terminal screw. Max. operating voltage: 32V DC; max. 20A per circuit and 75A per panel.

【High Quality】 Nickel-plated copper terminals, screw terminals and end hardware are all nickel-plated copper, which has excellent corrosion resistance and excellent conductivity

Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits

Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer

Positive distribution bus with #10-32 stud

LED INDICATOR FOR BLOWN FUSE - Easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected.

FUSE PROTECTION COVER - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.

100 AMP RATING - Maximum of 30 Amp per circuit & 100 Amp per panel.

【RAPID FIX】Red LED warning light on fuse box will light up immediately when the corresponding fuse is blown. It is very safe and easy for you to find the problem and replace the blown fuse.

【SAFE MATERIAL】Made of environment fire-resist PBT material, this fuse box meets all the standards of an nice fuse block, which has high mechanical strength, good insulation, heat & flame resistance. It will hardly cause any issues like fracture, deformation, combustion or short circuit.

【MAKE WIRING NEAT】12 volt fuse block with ground bus kit gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made your wiring clean and tidy.

【QUICK FIX】 – Red LED warning light will light up immediately when the corresponding fuse is blown. WUPP Automotive fuse block will indicate exactly where there is a short circuit or any other fault so you can easily identify it and change it!

【MAKE WIRING CLEAN】 – Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12 volt fuse block/ground bus kit gives you 12 dedicated fuses and 12 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!

【SAFE MATERIAL】– Made of environment-friendly PBT material, WUPP 12-volt fuse block meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon

【QUICK FIX】 – When the current/voltage exceeds the rated range,the fuse will be automatically blown.It has leds beside each load to indicate if a circuit has shorted or has blown.So you can easily identify it and change it!

【MAKE WIRING CLEAN】– Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12 volt fuse block/ground bus kit gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!

【UNIVERSAL PROTECTION】– The input rated voltage of the fuse box is 32V,and the input rated current is 100A.Each circuit outputs a maximum current of 30A. All bus bars and fuse pieces are nickel-plated copper, corrosion-resistant and highly conductive.

LED INDICATOR FOR BLOWN FUSE - Easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected.

FUSE PROTECTION COVER - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.

100 AMP RATING - Maximum of 30 Amp per circuit & 100 Amp per panel.

(2) ANL Fuse Holders with 250A Fuses

Securely Holds Fuse and Terminals (Use with 0,4,8 or 10 Gauge Ring Terminals)

Crystal Clear Cover

➤ Optimal Conductivity：12 Circuit Fuse Block Box is applied to ATC/ATO (Middle Size) fuses, which has positive & negative side. It means every positive terminal screw has a negative one. Max operating voltage: 32V DC; Max 30A per circuit & 100A per panel.

➤ Superior & Safe Material:Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. It hardly lead to break, deformation, combustion or short-circuit.

➤ Appliance Name Labels:Comes with multifunctional DIY sticker for convenient examination & repair. You can easy to identify which appliance is going wrong. Perfect for outdoor troubleshooting.

★【NEW DESIGN 6 WAY FUSE BOX】Electop 6-Way Blade Fuse Block accepts 1A to 20A ATC/ATO(middle size) fuses. It has positive and negative sides, which means that each positive terminal screw has a negative terminal screw to make your circuit clear at a glance. This device is intended for branch circuit protection and has good conductivity. Max. 32V DC operating voltage. Max. 20 Amp per circuit & 75 Amp per panel.

★【PREMIUM QUALITY & SAFE MATERIAL】Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon.

★【PROTECTION COVER & PRE-PRINTED DIY STICKERS】Transparent plastic cover with screw nut, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. Come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor.

This fuse block both for power and ground,Red LED lights indicator,when the fuse is not working,the light will be on.Then you can clearly know if the fuse block is normal.

Dsitribution ground block for car camper power solar panel battery ATV UTV caravans trailer marine boat and other for Power distribution.

Fuse block Input:2 x 0/4GA Output:4 x 4/8GA ,Battery distribution 2 IN 4 OUT: Input:2 x 0/4GA Output:4 x 4/8GA

【LED Safety Indicator and Quick fix】Red LED warning light on fuse block will light up immediately when the corresponding fuse is blown. It is very safe and easy for you to find the fault and replace the blown fuse.

【Safe Material and Premium Quality】Made of environment friendly PBT material, this fuse block meets all the standards of an excellent fuse box, which has high mechanical strength, good insulation, heat & flame resistance. It will hardly cause fracture, deformation, combustion or short circuit.

【Make Wiring Clean】This fuse box gives you 6 dedicated fuses and 6 ground locations to keep all of your wires clean, organized, and accessible. Made your wiring clean and tidy.

Country Of Origin : United States

The Package Height Of The Product Is 8 Inches

The Package Length Of The Product Is 10 Inches

✔QUICK FIX – Red LED warning light will light up immediately when the corresponding fuse is blown. WUPP Automotive fuse block will indicate exactly where there is a short circuit or any other fault so you can easily identify it and change it!

✔MAKE WIRING CLEAN – Instead of piling a mess of wires and fuse holders onto your battery posts, WUPP 12v fuse block/ground bus kit gives you 12 dedicated fuses and 12 ground locations to keep all of your wires clean, organized, and accessible. Made wiring electronics in your vehicles or boat a breeze!

✔UNIVERSAL PROTECTION – Whether you're building a massive overland lighting setup or adding power windows to your classic. WUPP marine boat fuse block with 100 Amps capacity, 30 Amps per fuse; Input voltage: DC12-32V; thumbscrew design is easy to secure the cover, and the ground bus bar is more than capable of protecting all of your hard work.

Voltage Max Operating: 58V DC, Amps Max Operating: 300A per block, Terminal Fuses Avail.: 30A-300A, Terminal Stud Size: 5/16"-18 (8mm), Mounting Hole Size: #10 (5mm)3/8"

Compact, high-amp fuse—appropriate for DC Main, inverter, windlass, and bow thruster circuit protection

Weatherproof – suitable for small open-cockpit boats and other harsh environments

50 AMP ANL Fuse Holder + 50A ANL Fuses, Solid Brass 0/2/4 Gauge (3 PACK), Has stable conductivity.

Unique swing-out design of ANL fuse allows replacement of the fuse without removing fastener.

The anl fuse block bolt specification is M8*1.25, which is the size of commonly used terminals.

Fit for car, boat, RV,truck off-road,SUV, ATV, UTV,marine and other for power splitting

4 Way Fuse Block: 2*30A ,2*60A ,2*80A fuses,Input:2 x 0/4GA,Output:4 x 4/8GA

Hyaline removable plastic protective shell,Sand Nickel plated contact that not easy to fade!

【Safeguard Your System】The Renogy ANL fuse offers complete protection to your system, protects your charge controller, battery, inverter, and connecting wires from over-current, and ensures you get the longevity out of your system that expected. Ignition protection guarantees the safe use of the fuse in RVs, boats, or any other closed environments.

【Multiple Specifications are Available】Renogy offers multiple specifications of the ANL fuses to meet the requirement of different size systems. Optional specifications including 20A/30A/40A/60A/100A/200A/300A/400A.The protective cover is compatible with all specifications.

【High Quality and Easy to Use Design】The Renogy ANL fuse is composed of high-quality alloy and brass copper materials and come with a clear protective non-conductive resistant cover which is ideal for custom installation and can be easily added to your solar system.

【Optimal Conductivity】 6 Circuit fuse block is applied to ATC/ATO (Middle Size) fuses, which has positive & negative side, meaning for every positive terminal screw there's a negative terminal screw. Max operating voltage: DC 32V, Max 30Amp per circuit & 100Amp per panel.

【Red LED Indicator】 When a blown fuse is detected, the related red LED warning light will light up immediately, reminding you to check and replace the blown fuse. Transparent plastic cover with push latch system, easy to operate, dustproof, and convenient to monitor the fuses situation.

【Superior PBT Material】 Fuse block box made of environment-friendly PBT material meets all the standards of an ideal fuse box. Which has high mechanical strength, good insulation, heat & flame resistance. No problems such as fractures, deformation, burning, or short circuits will occur.

Car audio ANL fuse holder with 200A ANL fuse（2 pack）

Gold/Nickel plated terminal,corrosion resistance

1/ 0 or 4 Gauge Input （Diameter: 10mm）

【SAFE MATERIAL】The automotive fuse block adopts PBT anti-flame retardant, high and low temperature environmental protection materials. The fuse holder has good mechanical strength, insulation, heat resistance and flame retardancy. It should not cause breakage, deformation, combustion and short circuit during use.

【PREMIUM QUALITY】All fasteners are stainless steel, the 12V fuse box is input, the output end is fixed by screwing screws, which can be installed more quickly, and the safety box is fixed by self-tapping screws, which makes the installation simpler and safer. All bus bars and fuse clips are nickel plated copper for corrosion resistance and optimum conductivity.

【LED SAFETY INDICATOR】 When a blown fuse is detected, the red LED warning light will illuminate immediately. You can check and replace blown fuses safer and easier without guesswork.

LED INDICATOR FOR BLOWN FUSE---Each circuit has red LED warning indication.If a fuse blows,the red LED next to the problem fuse will illuminate,allowing you easily identify and replace blown fuses immediately without guessing!

1 POWER CONNECTION/10 CIRCUIT OUT---Maximum of 30 Amp per circuit & 100 Amp per panel.4-Way Blade Fuse Box can interchangeable or compatible with all automobiles and devices equipped with a 10-33 Volt DC power source.

FUSE PROTECTION COVER---A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.Easy to operate, splash and dust-proof design.

OPTIMAL CONDUCTIVITY - 6-Circuit fuse block box for ATC/ATO(middle size) fuses; It has a positive and negative side, meaning for every positive terminal screw there's a negative terminal screw. Max. 32V DC operating voltage. Max. 30 Amp per circuit & 100 Amp per panel.

LED WARNING INDICATOR – Red LED warning light will light up immediately when the corresponding fuse is blown. It is both safe and easy for you to check and replace the blown fuse. (Note : Fuses NOT included.)

SAFE MATERIAL – Made of environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon.

Everything you Need to Install a Professional Looking Fuse Panel in Your Vehicle

Includes (1) 5A, (2) 10A, (2) 15A, (2) 20A, (1) 30A ATO/ATC Fuses, Premium Nylon Crimp Terminals, and a Red Terminal Boot to Prevent Incidental Shorting

4 Recessed Mounting Holes, Durable Clear Protective Cover and LED Warning Light to Indicate Blown Fuses

ANL Fuse Holder with 300A ANL Fuse for Car Audio（2 pack）

Nickel Finish,Crystal Clear Cover and Base

Securely Holds Fuse and Terminals (for 0,2,4,8 or 10 Gauge Ring Terminals)

【EFFICIENT SOLUTIONS】The fuse block comes with LED warning lights to quickly alert you if a circuit has shorted or blown. Say goodbye to the hassle of searching for faulty fuses.

【TIDY WIRING】With 12 dedicated fuses and 12 ground locations, this fuse box helps keep your wiring organized and easily accessible, making your vehicle or boat's electronics tidy and well-maintained.

【UNIVERSAL PROTECTION】The 12 Circuit Fuse Box is designed to work with ATC/ATO fuses, featuring both positive and negative terminals, ensuring each positive terminal is paired with a negative one. It operates at a maximum voltage of 32V DC with a maximum capacity of 30A per circuit and 100A per panel.

Fitment: Replacement for LHD models only: 2013-2018 Subaru XV/Crosstrek; 2013-2018 Subaru Forester; 2010-2014 Subaru Outback (Not Fit 2015 onwards); 2010-2014 Subaru Legacy; 2012-2016 Subaru Impreza (Gj,GP Series,previous shape only); 2015-2018 Subaru WRX STI.

Size: Length: 4 1/2" (11.3cm); Width: 4 1/4" (10.8cm).

Material: Sturdy Thermoplastic ABS; Upgrade the interior of your car in a unique style.

⚡RATED RANGE:Max operating voltage for the Fuse Block is 32V DC, this fuse box with max 30A per circuit & 100A per panel.The KNFRXO fuse box can operate stably at a current of 120A for a short time.This will protect your branch circuit components from excessive current damage.

⚡Warning Indicator：There's a red LED light next to each fuse,Red LED Warning light will light up immediately when the corresponding fuse is blown.Automotive fuse block will indicate exactly where there is a short circuit or any other fault,Remind you to check and replace the blown fuse.

⚡Superior Material：Made of environment friendly PBT material, this 12 volt 6 Way fuse block meets all the standards of an ideal fuse box. It has high strength, insulation, heat resistance and flame resistance. Damp proof cover included,After installation, it can prevent water from eroding the circuit.