Best Jtc Tools in 2026

*Made from Chrome-Molybdenum steel with a gap for use on union nuts fitted in hydraulic, oil, diesel, injection and compressed air systems.

*SPEC： 35mm，support 1/2 inch driver

*Lifetime warranty

Made from CR-V to provide a high strength level and uniform hardness. Handle material made from PVC. SPEC:8"

100% Original Made By JTC

Best Quality,Fastest Shipping,Local Service Support

Simply set the adjustment screw once for the complete job.

Reduce ring friction, slides into cylinder easily.

Capacity: 3" to 5" (75 to 125mm). Depth: 1-1/2" (38mm).

Contents: 10 x 12, 12 x 14, 13 x 15, 14 x 17, 16 x 18, 19 x 21.

100% Original Made By JTC

Best Quality,Fastest Shipping,Local Service Support

Specail extra long design.Material is the chrome molybdenum. Easy to use in the confined space,such as pulley core screws and the water tank frame screws, etc. SPEC: 8x10 LENGTH: 235

100% Original Made By JTC

Best Quality,Fastest Shipping,Local Service Support

Specail extra long design.Material is the chrome molybdenum. Easy to use in the confined space,such as pulley core screws and the water tank frame screws, etc. SPEC: 10x12 LENGTH: 291

100% Original Made By JTC

Best Quality,Fastest Shipping,Local Service Support

*This tool is designed to hold the crankshaft pulley while loosening or tightening the centre screw.

*To tighten crankshaft pulley by 2 screws (M8 x 1.25) Extend operation needs 1/2”DR. wrench.

*Applicable：This holding tool works with the following engines: Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ

Specially designed for removing and installing the injector sleeve.

*Compatible With Volvo FM12 truck. *VM Number: 85104134

Best Quality,Fastest Shipping,Local Service Support

For pulling-off wet cylinder sleeves on passenger cars or commercial vehicle. Applicable: Wet heavy-vehicle (e.g. Daimler BENZ, MAN) cylinder liners with φ60~160mm, automobile and stationary-engine liners, and other parts.

100% Original Made By JTC

Best Quality,Fastest Shipping,Local Service Support

*To take and plug-on of the ignition coil off with power-output stage at VW, AUDI fuel injection engines.

*The front hook removes ignition coil off well from damage itself.

*Applicable: VW Bora, Golf, Passat, Sharan, Touran, R32 Phaeton and T5, V5 2.3, V6 3.2.

PREMIUM - Precisely machined HEX & Torx sizes. Crafted and Designed with superior materials for increased torque and unmatched hardness.

DURABLE - Industrial grade, heat treated S2 alloy steel will increase turning power. Heavy-duty, will outperform the regular cr-v or common carbon materials.

LONGEVITY - Manganese Phosphate coating for rust and corrosion protection. Plus, the chamfered edges and ball end design will provide up to 25-degree angle entry.

Removable Power Tools Accessory Case

Quick Release, 72 Tooth Ratchet for high torque ratcheting

Durable anti-slip vinyl grip bit driver with maximum comfort.

HIGH DURABILITY: The impact socket set 1/2 drive metric and standard is made of high impact grade components of this master kit are constructed of drop-forged premium chrome vanadium Cr-V steel to withstand extreme levels of torque changes against fasteners.

6 POINT DESIGN: The 6-Point hex 1/2 impact socket set design prevents round-off on nuts and bolts under high torque exertion and hammering stress from the use of an impact wrench or electric wrench with a strong output.

DUAL MARKINGS: The impact socket set 1/2 drive has a highly visible laser-etched markings on the black phosphate finish makes it easy to identify drive socket sizes and measurements to allow for fast application, efficiency, and accuracy in your automotive workspace.

PRECISE - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.

DURABLE - Reinforced ratchet gear head constructed from hardened, heat-treated Chrome Vanadium alloy steel.

LONGEVITY - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.

Precision Torque Measurement - Install components with calibrated precision - 2.0 to 20.0 Newton Meter torque range with micro adjustment to 0.1. Helps ensure that the fittings on your bike are tightened to the correct torque, and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets.

Peace of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise).

Safe & Easy to Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set torque value is reached, alerting you to ‘stop’ applying force. Important: At low Nm settings under 5 Nm the click can be ‘subtle’. Between 5 & 20 Nm the click will be stronger.

measurement_system

Extremely robust and durable

Suitable for 1/4" hex bits under DIN 3126-C 6,3 and E 6,3, ISO 1173 and Wera series 1 and 4, Wera Adaptor 870/1 for 1/4" sockets

Precision Torque Measurement - Install components with calibrated precision - 2.0 to 20.0 Newton Meter torque range with micro adjustment to 0.1. Helps ensure that the fittings on your bike are tightened to the correct torque, and that clamping forces are distributed evenly across clamping surfaces. This helps prolong the life of high-performance components and prevents damage from over tightening. Ideal for use on stems, seat clamps, lever clamps, chain sets, rotors and headsets.

Peace of Mind Protect Your Investment – Over-tightening bolts can cause expensive damage to your bike. Applying too little torque can lead to bolts working loose or not doing their job. Our 1/4-inch drive dual-direction torque wrench driver removes the guesswork, making it easy to follow the manufacturer’s recommended settings. Each hand tool is shipped pre-calibration tested for accuracy, +/- 4% (clockwise) and +/- 6% (counter clockwise).

Safe & Easy to Use & Read – Smooth and precise operation. Spring loaded adjustment collar automatically ‘locks’ in place at the desired torque setting, ensuring it will not accidentally slip when being used. High-contrast Nm scale is easy to read. Wrench emits a ‘click’ that can be ‘heard and/or felt’ when the pre-set torque value is reached, alerting you to ‘stop’ applying force. Important: At low Nm settings under 5 Nm the click can be ‘subtle’. Between 5 & 20 Nm the click will be stronger.

Includes 15-pc. combination wrenches: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; Roll-up storage pouch

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

1/4, 3/8 to 1/2 IMPACT ADAPTER SET: This impact adapter reducer set has a specific impact grade design that is made exclusively for drivers, wrenches, and ratchets to convert size up or down for your automotive needs in the garage. Square drive converter.

CHROME VANADIUM STEEL: This socket adapter set is constructed of heavy duty drop forged and heat-treated chrome vanadium steel for superior strength and durability to exceed and endure in all work conditions.

BLACK OXIDE COATING: The super tough black oxide coating finish on these socket drill adapters gives you a long-lasting tool set that will stand the test of time and give you the most durable performance job after job.

Includes storage case and product manual with torque conversion chart

Wrench emits a click that can be heard and felt when the preset value is reached

High-contrast dual-range scale is easy to read, even in low light

Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V)

Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle

Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%

Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan

Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle

Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%

Applications of this adjusting tool include Ducati 1098, 1198, Streetfighter-1098, Multistrada 1200, Monster 1200, 1199, Diavel and all other Single Sided Large Axle Swingarms

Use alone or with a 3/8"D wrench for the adjustment of the drive chain on motorcycles fitted with single sided swinging arms

Alternative to 88713.1038 or 887131038. Manufactured precisely to fit the eccentric spanner nut

CORROSION RESISTANCE: Full Polish Chrome Finish

QUICK ENGAGEMENT: 12 Point Box End with fastener

ADDITIONAL KNUCKLE CLEARANCE: 15° Box End Offset

Set Includes: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind

Black oxide finish for corrosion protection

LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.

CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.

RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.

Includes 8-pc. stubby combination wrenches: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in.; Wrench holder

Short length and a slim body make it easy to operate in areas with limited room

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access

Solution to the extraneous rust problem: fasten stainless screws with stainless tools

Hex-plus allows hexagonal socket screws to live longer

Stainless l-keys prevent extraneous rust on stainless screws