Best K Kamoer in 2026

Volts:DC 12V, Flow rate: ≥70ml/min, Tube size: 3mm ID x 5mm OD, Relative humidity <80%,Ambient temperature <80%.

With Snap-in type design, no valves and seals.very easy to remove the pump head,convenient for pump tube replacement and cleaning.

It is small, lightweight, low power consumption, and supports changing the direction of liquid flow.

Voltage: 12V, flow rate: 40-210ml/min, weight: 765g (with power supply), positive pressure: 0.15Mpa, negative pressure: -0.09Mpa, size: L: 139, W79, H11（cm）

Working conditions: temperature 0-40℃, relative humidity <80%.

You can use the knob to adjust the liquid running direction, start-stop and flow rate, easy to operate.

24V, silicone tube: 3mm ID × 5mm OD（Please contact customer service for other pump tube sizes and models.） ，19-65ml/min, low noise, ambient temperature 0-40℃, relative humidity <80%, weight: 185g (including power supply 300g), size: L:72mm, W:86.5mm, H:80.2mm.

KXP-X is an affordable complete peristaltic pump. One pump can meet the requirements of multiple flow rates.The volume is very small, and the direction of the pump head can be adjusted. You can also choose other pump head accessories in the shop for replacement.

The operation is convenient, and the user can adjust the flow rate of the pump by rotating the button.

Voltage: 24V、Current: 2A max、Power: Less than 50W、Flow range: 1~452ml/min、Pump tube: BPT（longer service life time）.

Digital tube shows instant speed and flow rate. Precise control of stepper motor, speed adjustment resolution 0.1 rpm.

Support start/stop, direction change, speed regulation, calibration, reverse suction, etc.

Voltage 24V, current 1A, power <24W, max speed 400rpm, flow 180-520ml/min, the motor is a DC brush motor, weigh about 490g, noise<68dB.

Control method: Manually rotate the knob to adjust the speed; support speed adjustment but not support forward and reverse. The speed can be adjusted while the pump is running.

The peristaltic pump tube material: Norprene;pump tube size:4mm ID x 7.2 mm OD. Advantages: Good UV resistance, broad chemical resistance, and its lifetime is more than 1000H.

DIP1500 intelligent peristaltic pump, using high-precision long-life stepper motor, with a digital LED display to show the instant speed, flow rate.

Standard silicone tube S18#7.9mm IDx11.1mm OD(consumables,lifetime about 200H), easy to change tube, 3 rotors, speed range 0.1-400rpm, flow rate ≤1500ml/min, DC24V, 2A, power <50W, weight about 1.7KG, noise ≤65dB.

Support the functions of start-stop, reversing, speed regulation, calibration, reverse sucking back, etc. Precise control of stepper motor, speed adjustment resolution 0.1 rpm.

Motor: DC motor，Voltage: 12V，flow rate:5~340ml/min，Pump head speed：300rpm，pump tube :BPT tube 6.4mm ID × 9.6m OD，weight:0.75kg,Working temperature≤35℃.

The inner rotor is composed of two movable rotors and two guide rotors. The two ends of the movable rotor are equipped with self-adaptive springs to ensure that the outlet pressure is not changed by the degree of wear of the pump tube.

Very good resistance to general chemicals, as well as excellent resistance to acids, alcohol and oxides. The product is transparent and resistant to ultraviolet radiation, so it helps protect sensitive liquids.

KPHM series peristaltic pump, the new design makes the pump tube is well fixed and prevents the pump tube from moving during operation. It is also a very affordable high-flow peristaltic pump.

Motor: stepper motor,Voltage: 24V,Flow rate: 0-180ml/min,Rotor: 3 rotors,Working Temperature: 0-40℃,Humidity: ＜80%,Pump head material: plastic.

Application:water quality online analyzer and other analyzers，Hypochlorite generator,large commercial sweeper.

Stepper motor, 24V，Silicone tube,7.9mm ID × 11.1mm OD，1600ml/min.Ambient temperature 0~40℃, relative humidity <80%.Reduction ratio 1:20

Suitable for the transmission of viscous and non-viscous liquids, multi-stage gear movement, accurate and reliable.The pump head is detachable, and the pump tube is easy to replace.

The peristaltic pump tube is made of food-grade silicone tube.Good flexibility, tear resistance，good temperature resistance (working temperature: -60℃~200℃).

Working power supply: 110V-220V, power: 20W max, weight: 2.5kg, flow range: 1-352ml/min, using high-precision stepping motor, longer life，low noise.

Tube size: Silicon tube (ID*OD: 4.0mm*7.2mm)，For other sizes, please contact customer service.

LCD screen display（Two language modes, support Chinese and English display.）, touch button operation, simple and convenient peristaltic pump.

12V DC motor, power: 12W, working environment temperature: 0-70℃, the direction of the pump head can be adjusted up, down, left and right, flow rate range 27~40ml/min.

LCD screen display, including continuous mode, timing mode, custom mode and other modes.

This peristaltic pump has a calibration function and supports speed adjustment. It can be adjusted to the required speed through the speed adjustment knob, and it can be set to run at a specified time.

KPHM series peristaltic pump, the new design makes the pump tube is well fixed and prevents the pump tube from moving during operation. It is also a very affordable high-flow peristaltic pump.

Motor: DC brush motor,Voltage: 12V,Current: 0.5A,Flow rate: 100ml/min,Roller: 3 rotors,Working Temperature: 0-40℃,Humidity: ＜80%,Pump head material: plastic.

Application:water quality online analyzer and other analyzers，Hypochlorite generator,large commercial sweeper.

EDLP600 12V diaphragm pump for gas and liquid with 12V brush motor, current 0.3A, positive pressure ≥ 0.05, negative pressure ≥ 0.04, noise ≤ 65dB, weight 65g, life expectancy under normal circumstances in about 300 hours, gas flow > 1L/min, liquid flow ≥ 600ml/min.

EDLP600 gas-liquid diaphragm pump, can be used for oxygenation, pumping, pumping water. Snap-on structure is easy to combine and disassemble, no valves and seals, easy to disassemble.

EDLP600 12V diaphragm liquid ​pump can be used as parts of the equipment, can be used for DIY, can be used to pump liquids and gases, etc.

Voltage 24V, flow rate range 250-600ml/min, pump tube size 6.4 mm ID x 9.6 mm OD, connector type 1/4.

Adopt potentiometer knob to adjust speed, easy to use. Small size and low noise. The pump head contains three rotors with moderate pulse.

Kamoer's newly designed bull head shape pump head effectively solves the problem of poor fixation and easy wear of the peristaltic pump tube during operation.

Size: 93x100x108 mm (L x W x H), weight: 534g (without power adapter), input voltage 100VAC-240VAC, output voltage 24V DC, current 1.9A, pump head rotor number 3, flow rate ≤110ml/min, accuracy around 2%, working ambient temperature 0-70 ℃, humidity 10%-90% (non-condensing), storage environment temperature -20 ℃ ~ 85 ℃, humidity 10%-90% (non-condensing).

X1 PRO T2 can be used as dosing pump, it can flexibly and accurately replenish various elements required for marine growth, such as calcium, magnesium, KH enhancer, trace elements, etc. to the marine tank.

X1 PRO T2 also can be used as calcium pump, it can provide stable flow of water for calcium reactor.

Volts:DC 24V，Flow rate:110 mL/min，Speed:350rpm,Pharmed BPT tube：3.2mm ID × 6.4mm OD.Working temperature: 0~40℃，Relative humidity <80%，Rotor:3 rotors.

Suitable for the transmission of viscous and non-viscous liquids, stepping motor, high precision.

Pump tube material: Pharmed BPT tube，tube service life＞1000H.It has very good chemical resistance.Operating temperature range -51℃~132℃.

KLC2 small Diaphragm pump for gas and liquid. Voltage 6V, liquid flow ≥ 550ml/min, gas flow ≥ 800ml/min, current 0.6 A. This model is equipped with a fixed frame and 1 meter PVC pipe.

KLC2 diaphragm liquid pump advantages: small size, low noise, maintenance-free, wide range of applications, pump life of about 300 hours, good value for money. KLC2 small diaphragm pump can also be used with a USB connection cable, such as power supply with a rechargeable battery. (The premise is required to meet the 0.6 A current output)

KLC2 is a miniature 6V diaphragm vacuum pump, which supports gas-liquid dual-use, it is based on the principle of displacement pump design. It is powered by the rotation of the motor, through the eccentric wheel on the motor shaft to drive the rubber cycle, reciprocating motion, the formation of inhalation and discharge action inside the cavity, through the closure and opening of the one-way valve thus achieving the inhalation and discharge of gas and liquid.

Volts:DC 12V，Flow: 500ml/min, Norprene tube：4mm ID × 7.2mm OD，Working temperature: 0~40℃，Relative humidity <80%，Rotor:3 rotors.

This peristaltic pump adopts engineering plastic gear transmission, which is cost-effective. The rotor is fixed by a triangular synchronous disc, and the internal gear structure design can stably and effectively prevent the pump tube from slipping.

This peristaltic pump is suitable for the transmission of viscous and non-viscous liquids with a large flow rate.

Adopt long-life stepper motor (6000H), voltage 24V, power 36W, noise <75dB, control mode: PWM/analog voltage speed regulation. The weight is about 483g.

Flow rate range 1~485ml/min. Max speed 400rpm for continuous operation; flow rate up to 330ml/min; Max speed 600rpm for intermittent operation; flow rate up to 485ml/min.

Easy to operate and quick to change the pump tube; new design has two tube clamp positions to accommodate 0.8~4.8mm inner diameter silicone tube and 0.8-3.2mm inner diameter BPT tube.

KPHM series peristaltic pump, the new design makes the pump tube is well fixed and prevents the pump tube from moving during operation. It is also a low-cost large flow peristaltic pump with stepper motor.

Motor: Stepper motor,Voltage: 24V,Current: 0.3A,Flow rate: 400ml/min，Speed: 400rpm，Net weight: 304g,Roller: 3 rotors,Working Temperature: 0-40℃,Humidity: ＜80%,Pump head material: Nylon

Pump tube material:PharMed BPT.Very good resistance to general chemicals, as well as excellent resistance to acids, alkalis and oxides.

12V brushless motor diaphragm vacuum air pump, parallel connection，flow ≥480L/H,life>6000H.

Vacuum pump series negative pressure≥0.09Mpa, parallel negative pressure≥0.07Mpa. Noise ≤72DB.

HLVP8 12V vacuum pump using EPDM high-quality diaphragm, good resistance, pump weight ≈ 290g.

The new UIP adopts the new KK1800 pump head, which solves the pump head cracking problem of the old pump head.

Maximum power: 75W, voltage: 110V-220V, 7.9mm ID x 11.1mm OD, wall thickness 1.6mm,motor life>6000H,speed range: 1-350rpm, noise <65db, weight: 5.6kg, flow range: 1-1520ml/min.

Support mobile App, Wifi control, there are multiple modes to choose. It can be set to change the liquid flow direction, set the speed,set the operating parameters yourself and control the start and stop, etc. It is also equipped with a foot switch to control the start and stop.It adopts high-speed stepping motor and a stainless steel rotor inside, which makes it has a longer service life.

Motor RPM: 5000RPM, Volts:DC 12V, Flow rate:0-100 ml/min, Tube size: 2mm ID x 4mm OD, Relative humidity <80%

With Snap-in type design, it is easy to remove the pump head, very convenient for pump tube replacement and cleaning.

The compact design not only has the convenience of press type, but also avoids many problems such as the movement of the press type pump head hose.

Works with Classic and SVP Series Pumps

Includes Tube, Duckbill, and Ferrules 1/4"

100 psi max

Adjustable peristaltic pump, you can adjust the flow of the peristaltic pump by the knob, a water pump can meet a variety of flow requirements, greatly reducing costs.

This dosing pump has been widely used in the field of experimental, biochemical analysis, pharmaceuticals, fine chemicals, biotechnology, pharmaceutical, products, ceramics, water treatment, environmental protection, etc.

The pump head designed for easy disassembly, easy to clean and maintain.

Volts:DC 12V, Flow rate: ≥70ml/min, Tube size: 3mm ID x 5mm OD, Relative humidity <80%,Ambient temperature <80%.

With Snap-in type design, no valves and seals.very easy to remove the pump head,convenient for pump tube replacement and cleaning.

It is small, lightweight, low power consumption, and supports changing the direction of liquid flow.

Voltage: 12V, flow rate: 40-210ml/min, weight: 765g (with power supply), positive pressure: 0.15Mpa, negative pressure: -0.09Mpa, size: L: 139, W79, H11（cm）

Working conditions: temperature 0-40℃, relative humidity <80%.

You can use the knob to adjust the liquid running direction, start-stop and flow rate, easy to operate.

PERFECT DESIGN: Using buckle type design, just one click you can, and gently remove the pump head, exquisite design of the pressure plate is convenient, also avoid the pressure hose pump head piece walking and many other issues.

APPLICATION: Silent work suitable for Aquarium, Chemicals, Liquids, Dosing Additives; apply to Medical, Chemical, Experiment, Food, Plants, Environmental protection, Family and many other fields.

FLOW DIRECTION: You can control the flow direction by the positive and negative connect. Each Channel Provides 1 to 9999ml per day, 6000 hours long life time.

【Wide Use】Suitable for aquarium, chemicals, liquids, dosing additives.

【Flow direction】you can control the flow direction by the positive and negative connect Silent work.

【Size】Driver sizeΦx H:Dia.32 x Height 23(mm) Pump head size(Φx H):Dia. 54 x Height 46(mm) Installtion hole:47mm.

24V, silicone tube: 3mm ID × 5mm OD（Please contact customer service for other pump tube sizes and models.） ，19-65ml/min, low noise, ambient temperature 0-40℃, relative humidity <80%, weight: 185g (including power supply 300g), size: L:72mm, W:86.5mm, H:80.2mm.

KXP-X is an affordable complete peristaltic pump. One pump can meet the requirements of multiple flow rates.The volume is very small, and the direction of the pump head can be adjusted. You can also choose other pump head accessories in the shop for replacement.

The operation is convenient, and the user can adjust the flow rate of the pump by rotating the button.