Best Stenner Pump Company in 2026

Works with Classic and SVP Series Pumps

Includes Tube, Duckbill, and Ferrules 1/4"

100 psi max

Works with all Stenner Pumps

Includes Santoprene Duckbill and Ferrule 3/8"

100 psi max

Works with all Stenner Pumps

Package includes: 5 Connecting Nuts 3/8" and 5 Lead Tube Adapters

Genuine Stenner replacement part

Works with all Stenner Pumps

Package includes: 5 Connecting Nuts 3/8" and 5 Lead Tube Adapters

Genuine Stenner replacement part

Works with Classic and SVP Series Pumps

Includes Tube, Duckbill, and Ferrules 1/4"

100 psi max

Adjustable peristaltic pump, you can adjust the flow of the peristaltic pump by the knob, a water pump can meet a variety of flow requirements, greatly reducing costs.

This dosing pump has been widely used in the field of experimental, biochemical analysis, pharmaceuticals, fine chemicals, biotechnology, pharmaceutical, products, ceramics, water treatment, environmental protection, etc.

The pump head designed for easy disassembly, easy to clean and maintain.

Volts:DC 12V, Flow rate: ≥70ml/min, Tube size: 3mm ID x 5mm OD, Relative humidity <80%,Ambient temperature <80%.

With Snap-in type design, no valves and seals.very easy to remove the pump head,convenient for pump tube replacement and cleaning.

It is small, lightweight, low power consumption, and supports changing the direction of liquid flow.

Voltage: 12V, flow rate: 40-210ml/min, weight: 765g (with power supply), positive pressure: 0.15Mpa, negative pressure: -0.09Mpa, size: L: 139, W79, H11（cm）

Working conditions: temperature 0-40℃, relative humidity <80%.

You can use the knob to adjust the liquid running direction, start-stop and flow rate, easy to operate.

Voltage: 24V、Current: 2A max、Power: Less than 50W、Flow range: 1~452ml/min、Pump tube: BPT（longer service life time）.

Digital tube shows instant speed and flow rate. Precise control of stepper motor, speed adjustment resolution 0.1 rpm.

Support start/stop, direction change, speed regulation, calibration, reverse suction, etc.

Voltage 24V, current 1A, power <24W, max speed 400rpm, flow 180-520ml/min, the motor is a DC brush motor, weigh about 490g, noise<68dB.

Control method: Manually rotate the knob to adjust the speed; support speed adjustment but not support forward and reverse. The speed can be adjusted while the pump is running.

The peristaltic pump tube material: Norprene;pump tube size:4mm ID x 7.2 mm OD. Advantages: Good UV resistance, broad chemical resistance, and its lifetime is more than 1000H.

DIP1500 intelligent peristaltic pump, using high-precision long-life stepper motor, with a digital LED display to show the instant speed, flow rate.

Standard silicone tube S18#7.9mm IDx11.1mm OD(consumables,lifetime about 200H), easy to change tube, 3 rotors, speed range 0.1-400rpm, flow rate ≤1500ml/min, DC24V, 2A, power <50W, weight about 1.7KG, noise ≤65dB.

Support the functions of start-stop, reversing, speed regulation, calibration, reverse sucking back, etc. Precise control of stepper motor, speed adjustment resolution 0.1 rpm.

Motor: DC motor，Voltage: 12V，flow rate:5~340ml/min，Pump head speed：300rpm，pump tube :BPT tube 6.4mm ID × 9.6m OD，weight:0.75kg,Working temperature≤35℃.

The inner rotor is composed of two movable rotors and two guide rotors. The two ends of the movable rotor are equipped with self-adaptive springs to ensure that the outlet pressure is not changed by the degree of wear of the pump tube.

Very good resistance to general chemicals, as well as excellent resistance to acids, alcohol and oxides. The product is transparent and resistant to ultraviolet radiation, so it helps protect sensitive liquids.

KPHM series peristaltic pump, the new design makes the pump tube is well fixed and prevents the pump tube from moving during operation. It is also a very affordable high-flow peristaltic pump.

Motor: stepper motor,Voltage: 24V,Flow rate: 0-180ml/min,Rotor: 3 rotors,Working Temperature: 0-40℃,Humidity: ＜80%,Pump head material: plastic.

Application:water quality online analyzer and other analyzers，Hypochlorite generator,large commercial sweeper.

Stepper motor, 24V，Silicone tube,7.9mm ID × 11.1mm OD，1600ml/min.Ambient temperature 0~40℃, relative humidity <80%.Reduction ratio 1:20

Suitable for the transmission of viscous and non-viscous liquids, multi-stage gear movement, accurate and reliable.The pump head is detachable, and the pump tube is easy to replace.

The peristaltic pump tube is made of food-grade silicone tube.Good flexibility, tear resistance，good temperature resistance (working temperature: -60℃~200℃).

Working power supply: 110V-220V, power: 20W max, weight: 2.5kg, flow range: 1-352ml/min, using high-precision stepping motor, longer life，low noise.

Tube size: Silicon tube (ID*OD: 4.0mm*7.2mm)，For other sizes, please contact customer service.

LCD screen display（Two language modes, support Chinese and English display.）, touch button operation, simple and convenient peristaltic pump.

12V DC motor, power: 12W, working environment temperature: 0-70℃, the direction of the pump head can be adjusted up, down, left and right, flow rate range 27~40ml/min.

LCD screen display, including continuous mode, timing mode, custom mode and other modes.

This peristaltic pump has a calibration function and supports speed adjustment. It can be adjusted to the required speed through the speed adjustment knob, and it can be set to run at a specified time.

KPHM series peristaltic pump, the new design makes the pump tube is well fixed and prevents the pump tube from moving during operation. It is also a very affordable high-flow peristaltic pump.

Motor: DC brush motor,Voltage: 12V,Current: 0.5A,Flow rate: 100ml/min,Roller: 3 rotors,Working Temperature: 0-40℃,Humidity: ＜80%,Pump head material: plastic.

Application:water quality online analyzer and other analyzers，Hypochlorite generator,large commercial sweeper.

REMOVABLE PUMP HEAD: The pump head of three rollers proportional pump has ball bearings wheel frame,quiet and long service life,with transparent PC removable pump head

ACCURATE AND STABLE DELIVERY: The experimental liquid distribution pump adopts the screw clasp design,detachable while keeping the conveying stable, which is convenient to replace the hose

FIXED SEAT: Our transparent PC head liquid pump has two types,12V/24V (optional),each one has Fixed Seat to make sure Low noise quantitative pumping medium

Aquarium Dosing Pump --- Single head design, long service life

Peristaltic Pump --- Widely used in the field of experimental, biochemical analysis, pharmaceuticals, fine chemicals, etc.

Aquarium Water Pump --- The knob can adjust pump flowing rate, easy to operate

Voltage 24V, flow rate range 250-600ml/min, pump tube size 6.4 mm ID x 9.6 mm OD, connector type 1/4.

Adopt potentiometer knob to adjust speed, easy to use. Small size and low noise. The pump head contains three rotors with moderate pulse.

Kamoer's newly designed bull head shape pump head effectively solves the problem of poor fixation and easy wear of the peristaltic pump tube during operation.

Volts:DC 24V，Flow rate:110 mL/min，Speed:350rpm,Pharmed BPT tube：3.2mm ID × 6.4mm OD.Working temperature: 0~40℃，Relative humidity <80%，Rotor:3 rotors.

Suitable for the transmission of viscous and non-viscous liquids, stepping motor, high precision.

Pump tube material: Pharmed BPT tube，tube service life＞1000H.It has very good chemical resistance.Operating temperature range -51℃~132℃.

Volts:DC 12V，Flow: 500ml/min, Norprene tube：4mm ID × 7.2mm OD，Working temperature: 0~40℃，Relative humidity <80%，Rotor:3 rotors.

This peristaltic pump adopts engineering plastic gear transmission, which is cost-effective. The rotor is fixed by a triangular synchronous disc, and the internal gear structure design can stably and effectively prevent the pump tube from slipping.

This peristaltic pump is suitable for the transmission of viscous and non-viscous liquids with a large flow rate.

DC Dosing Pump Peristaltic Adopt the design without screw clasp, easy to disassemble and maintain

Support CW and CCW: switching power supply positive and negative pole, realize the CW and CCW of the pump head

Flow direction: you can control the flow direction by the positive and negative connect.

Adopt long-life stepper motor (6000H), voltage 24V, power 36W, noise <75dB, control mode: PWM/analog voltage speed regulation. The weight is about 483g.

Flow rate range 1~485ml/min. Max speed 400rpm for continuous operation; flow rate up to 330ml/min; Max speed 600rpm for intermittent operation; flow rate up to 485ml/min.

Easy to operate and quick to change the pump tube; new design has two tube clamp positions to accommodate 0.8~4.8mm inner diameter silicone tube and 0.8-3.2mm inner diameter BPT tube.

KPHM series peristaltic pump, the new design makes the pump tube is well fixed and prevents the pump tube from moving during operation. It is also a low-cost large flow peristaltic pump with stepper motor.

Motor: Stepper motor,Voltage: 24V,Current: 0.3A,Flow rate: 400ml/min，Speed: 400rpm，Net weight: 304g,Roller: 3 rotors,Working Temperature: 0-40℃,Humidity: ＜80%,Pump head material: Nylon

Pump tube material:PharMed BPT.Very good resistance to general chemicals, as well as excellent resistance to acids, alkalis and oxides.

Equipped with two modes, manual working mode and intelligence working mode. You can set according to your needs.

A peristaltic pump for timed and dosing liquid delivery, and can be used in laboratory, home, office, etc.

Two digital displays, very convenient for watching interval time and watering time setting.

[Specification] This product contains peristaltic pump head and stepper motor with harness, it is ready for use. The working voltage is 12-24V, maximum flow is 140ml/min. It fits I.D. 2mm O.D. 4mm and I.D. 3mm O.D. 5mm pipe.

[High Quality] The pump is made of high-quality material, which is anti-corrosive, wear-resistant and durable.

[Easy to Use] The pump has a fast buckle for quick replace of pipe, a great desgin.