Best Lamea in 2026

Size - The Shower Flange is suitable for pipes of any material less than 21mm in diameter. Please measure your pipe to make sure that it matches the measurements on this product.

Material - The hinged floor and ceiling plate flange cover is made of 304 stainless steel, which has great heat resistance and corrosion resistance, that can be applied for long time use. Chrome Finish.

Easy Installation - The hinged floor and ceiling plate flange cover can be easily installed without experience a hassle-free installation with no expert plumbing skills or tools.

Size - The hole diameter is 0.79 " (20 mm) and the outer diameter is 2.76 " (70 mm), For 1/2" CTS Nominal Copper Pipe. Please measure your pipe accordingly and ensure that it matches the measurements on this description. Please allow 0.5-1 cm error in size.

Wide Application - Hinged floor and ceiling plate cover Suitable for heating pipes, water pipes, angle valves, faucets, various pipes, etc. Also can be installed in kitchen faucets, sinks, toilets, and so on. Its chrome finish hides gaps around water pipes to maintain a clean appearance.

Reliable Material – Plumbing Cover Plates are made of ABS plastic, which is not easy to break, deform, or fade, will not corrode or rust, and can serve you for a long time.

Size - The hole diameter is 0.83" (21 mm) and the outer diameter is 2.44 " (62mm), For 1/2" CTS Nominal Copper Pipe. Please measure your pipe accordingly and ensure that it matches the measurements on this description. Please allow 0.5-1 cm error in size.

Wide Application - Hinged floor and ceiling plate cover Suitable for heating pipes, water pipes, angle valves, faucets, various pipes, etc. Also can be installed in kitchen faucets, sinks, toilets, and so on. Its chrome finish hides gaps around water pipes to maintain a clean appearance.

Material - The Plumbing Cover Plates is made of 304 stainless steel, which has great heat resistance and corrosion resistance, that can be applied for long time use.

City Water Flange. Lead free brass check valve with 1/2” MPT

Direct OEM replacement

UV and impact resistant

Venetian Bronze

Rigorously tested to ensure quality performance

See what Delta can do

1/2 in. IPS male threads

2 1/2 in. outside diameter

6 in. long

1/2" IPS male threads

9 Inch long

2 7/8" outside diameter

[OVER-SIZED] Universal Shower Arm Flange Escutcheon Plate

[LUXURY DESIGN] Modern Flat Design Fits All Standard 1/2" Pipes

[FEATURES] O-Ring Rubber Gasket For A Premium Fit And Finish

GARBAGE DISPOSAL FLANGE: This Sink Flange is designed to support your InSinkErator manufactured disposer. Available in a variety of popular designer finishes to complement many kitchen sink designs.

HIGHEST STANDARDS: Genuine InSinkErator parts & accessories add a touch of elegance & convenience. We offer an entire range of garbage disposal accessories held to our highest standards.

AMERICA'S #1 DISPOSER BRAND: There are more American-built InSinkErator garbage disposals in US homes than all other brands combined. A full line of models means there's one right for every need and budget.

GARBAGE DISPOSAL FLANGE: This Sink Flange is designed to support your InSinkErator manufactured disposer. Available in a variety of popular designer finishes to complement many kitchen sink designs.

HIGHEST STANDARDS: Genuine InSinkErator parts & accessories add a touch of elegance & convenience. We offer an entire range of garbage disposal accessories held to our highest standards.

AMERICA'S #1 DISPOSER BRAND: There are more American-built InSinkErator garbage disposals in US homes than all other brands combined. A full line of models means there's one right for every need and budget.

Case quantity of 1

Brilliance Stainless

Model number: RP51034SS

Sensible styling that complements any home

Classically styled faucets and accessories handle the toughest of tasks with ease

For bar/prep sink applications. Overall Height :1-7/8

Sure grip low pattern flange

Fits 1/2 in. IPS shower arms

13/16" OD of center hole opening

Fits standard shower arms

2.5-Inch outside diameter

Made of metal

[VALUE] This escutcheon flange cover comes in a contractor 10 pack which is individually wrapped with scratch resistant film to protect from score damages during shipment.

[COMPATIBILITY] The escutcheon flange cover is compatible with all 1/2" nominal water pipes such as copper, PEX, and CPVC.

[FUNCTION] Built-in Sure Grip allows a snug, tight fit around the pipe, providing a rigid setup against the wall surface. It also conceals gaps to maintain a clean and sharp look.

Sure Grip Low Pattern Flange for Copper pipe

For mounting to 1/2 in. Copper pipe (5/8 in. OD)

2-1/2 in. OD Exterior diameter

Sensible styling that complements any home

Classically styled faucets and accessories handle the toughest of tasks with ease

For bar/prep sink applications

Size - The Shower Flange is suitable for pipes of any material less than 21mm in diameter. Please measure your pipe to make sure that it matches the measurements on this product.

Material - The hinged floor and ceiling plate flange cover is made of 304 stainless steel, which has great heat resistance and corrosion resistance, that can be applied for long time use. Chrome Finish.

Easy Installation - The hinged floor and ceiling plate flange cover can be easily installed without experience a hassle-free installation with no expert plumbing skills or tools.

New Waxless Toilet Flange and Spacer System for any NEW installation or REPAIR on 4" ID pipes.( Pipe must have a clear 4" ID")

Optional use of Spacers- adjust the height of the flange if needed- from min.3/8" to max. 1 1/8" height difference.

Inward lip forms a seal directly to the toilet horn, NO WAX NEEDED. Flexible Sleeve seals to the inside of the pipe. See Diagram A.

Corrects an improper flange height from 1/4 in. - 1 in. during repair and remodels

Easily extend the flange surface above the floor for optimum sealing with a standard wax ring

Use on existing PVC, ABS, cast iron, and stainless steel ringed flanges

Spacer builds up existing toilet flange on below-grade flooring

1/4 in. thick

Up to 3 can be stacked together

The flange sits securely against your tub or shower wall and adds a decorative finished look to your handles

Fits stems: 12H-1; 12H-2; 12H-4; 12H-18

Replaces Price Pfister 960-111A

Material stainless steel, 304 stainless steel.

Suitable pipe diameter: 28mm / 1.1inch.

Convenient installation: the radiator tap cover can be directly installed on the tap hole of the installed pipe, without removing the pipe. This split protective cover provides great comfort.

Purpose - floor and ceiling plates also known as escutcheon plates are used to cover and close the gap between the outside diameter or the pipe and the inside diameter of the wall, floor, or ceiling opening to avoid damage and leakage.

Measurements - Hole diameter is 0.625 inch (15.88mm) and outside diameter is 2.83 inches (72mm) Please measure your pipe accordingly and make sure that it matches the measurements on this description.

Fittings - Fits 3/8 inch IPS (3/8" Outside Diameter) Galvanized Pipe or 1/2 inch (1/2" Outside Diameter) Copper Pipe. Perfect for bathroom and kitchen tubular pipes.

Fits most Waste King brand EZ-mount style garbage disposals

Fits standard sinks with 3-1/2 in. drain opening; 4-1/4 in. rim diameter flange with 2-1/2 in. deep collar

3-1/4 in. diameter, 1-1/4 in. tall removable stopper with rubber rim included to slow the drain of water in the sink and prevent unwanted debris from going down the disposal

FLANGE COVER: Cover conveniently replaces existing flanges without removing them

CLIP-ON DESIGN: 2 part design clips over shallow or deep flange and hides the old piping behind it, eliminating the need to cut the old flange off or remove the valve

EASY INSTALLATION: Simple to use design allows for easy installation and removal or replacement

Fabricated from Solid Brass for Reliability

Fits Most of the Standard 1/2" IPS Connection

Corrosion-Resistant Finish

UNIVERSAL - Universal, adjustable design fits stems of various sizes

FULL COVERAGE - Covers the working mechanism of a faucet

DURABLE BRASS - Durable brass construction provides reliability

Size details: the size of flange cover is about 16 x 10 x 50 mm/0.5 x 0.4 x 1.97 inches, fitting for 1/2 inches nominal copper pipe (5/8 inches OD); The middle hole size is 16 mm

Reliable material: the escutcheon flange cover is made of 304 stainless steel, which has nice heat resistance and corrosion resistance to many corrosive agents, and can be applied for a long time

Easy installation: the flange plate cover can be easily cut with a utility knife and installed around the pipe to increase the decoration of the pipe

Durable plastic construction

Use to install new tub/shower handle flanges

41/64-18 x 2-13/16 in.