Last Updated: Sep 27, 2023
* PickSmartly editors independently research, review, and endorse the top products through comprehensive data analysis. We may earn a commission for qualifying purchases made through our product links.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Dollar Hobbyz | 9.87 | ✅ | ✅ | ✅ |
54-Tooth steel spur gear
1.0 metric pitch
20° pressure angle
Delivers the ultimate in durability and heat Resistance for the x-maxx
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Raidenracing | 9.82 | ✅ | ✅ | ✅ |
Material: Harden Steel
Color : Black
50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh)
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
Replacement 16-tooth spur gear
Used for In-Wall slide-out
Easy, DIY installation
Exact-match component
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| HF Alliance⭐ | 9.53 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Sunset Retail | 9.72 | ❌ | ❌ | ❌ |
Package Dimensions: 1.4 cms (L) x 7.6 cms (W) x 9.1 cms (H)
Product Type: Hobbies
Package Quantity: 1
Country Of Origin: United States
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| KHC Shop | 9.57 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| KHC Shop | 9.57 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 12 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| SIM Supply, Inc. | 9.81 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 8 for applications where transferring torque is more important than controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| SIM Supply, Inc. | 9.81 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 8 for applications where transferring torque is more important than controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| KHC Shop | 9.55 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 32 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Wu Jinkun | 9.69 | ✅ | ✅ | ✅ |
Material: Brass
Size: Teeth width: 5mm, Pitch: 1.57mm(1inch=25.4mm)
Features: Widely used in hardware, molds, and the occasion of the mechanical transmission.
Package Included:2Pcs 0.5M12T 3mm Bore Hole 12 Tooth Width 5mm Module 0.5 Motor Metal Spur Gear(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)
Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Hobby Etc | Authorized ✅ | 9.93 | ❌ | ❌ | ❌ |
This is the Kimbrough Precision Spur Gear 54T 32P Plastic WraithFeatures:Made of durable materialsRequires: Installation onto vehicle
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amadeo City | 9.87 | ✅ | ✅ | ✅ |
[Material] - The helical motor gear is made of 45# steel, more stable, anti-wear, strong and durable, and durable in use.
[Helical Gear] - The helical pinion gear aperture is 8mm and the module is 1, please check the size before purchasing.
[Black Oxide] - The gear has a black oxide finish for longer-lasting performance.
[Good Replacement] - Good hardened helical pinion gear replacement for your device.
[Hardened] - The gears are quenched at high frequency and can withstand extremely high strength.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Global Power | 9.20 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
High carbon steel for tensile strength and hardness
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 12 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Global Power | 9.20 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
High carbon steel for tensile strength and hardness
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Moofin | 9.88 | ✅ | ✅ | ✅ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 12 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Global Power | 9.20 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
Diametral pitch of 20 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
High carbon steel for tensile strength and hardness
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| HARFINGTON | 9.92 | ✅ | ✅ | ✅ |
Size - Teeth: 62T, Tooth Pitch: 3.1mm / 0.12inch, Tooth Depth: 2.3mm / 0.09inch, Outer Diameter: 64mm / 2.52inch, Inner Diameter: 8mm / 0.31inch, Total Thickness: 10mm / 0.39inch, Module: 1 Mod, Pressure Angle: 20°
Material - The pinion motor gear is made of 45# Steel, the tooth surface is treated by high frequency quenching, more stable, anti-wear, strong and durable, and durable in use.
Feature - Good machining made it less rough and noisy than other gears, making them roll smoothly.
Application - Good straight spur gear replacement for your device.
Note - The inner hole of the gear is the blank hole, which needs to be processed by itself. The pinion gear aperture is 8mm and the module is 1, please check the size before purchasing. You will receive 1 x straight spur gear.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Rapid Warehousing | 9.89 | ❌ | ❌ | ❌ |
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| KHC Shop | 9.57 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 14.5 degrees for a higher contact ratio between gears, resulting in quieter operation than larger pressure angles
Diametral pitch of 24 for applications where controlling changes in speed and direction of rotation with precision is more important than transferring torque
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| Amazon.com | 9.68 | ✅ | ✅ | ✅ |
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| CNBTR (FBM Arrive in 20-25 days ,FBA 2-3days ) | 9.81 | ✅ | ✅ | ✅ |
Modulus: 0.5M, number of teeth: 72T, aperture: 6mm,
Description: This gear is suitable for non-load use within 8 hours, with good precision and high concentricity
Made of 45# steel, strong and durable
It is mostly used for personal DIY, small machinery, micro generators, etc.
If you have any question about the product, feel free to contact the CNBTR Service and we will try our best to give you a satisfactory answer.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| E.B. ATMUS | 5.13 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
Diametral pitch of 16 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| HARFINGTON | 9.92 | ✅ | ✅ | ✅ |
Size - Teeth: 12T, Outer Diameter: 14mm / 0.55inch, Aperture: 5mm / 0.2inch, Effective Tooth Length: 20mm / 0.79inch, Total Thickness: 25.4mm / 1inch, Module: 1 Mod, Pressure Angle: 20°
Material - The pinion motor gear is made of Stainless Steel, more stable, anti-wear, strong and durable, and durable in use.
Feature - Good machining made less rough and noise than other gears, making them roll smoothly.
Application - Good pinion gear replacement for your device.
Note - The pinion gear aperture is 5mm and the module is 1, please check the size before purchasing.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| E.B. ATMUS | 6.86 | ❌ | ❌ | ❌ |
Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
Diametral pitch of 8 for applications where transferring torque is more important than controlling changes in speed and direction of rotation with precision
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| HARFINGTON | 9.92 | ✅ | ✅ | ✅ |
Size - Teeth: 32T, Step Diameter: 20mm / 0.79inch, Outer Diameter: 34mm / 1.34inch, Inner Hole Diameter: 10mm / 0.39inch, Effective Tooth Length: 10mm / 0.39inch, Total Thickness: 20mm / 0.79inch, Teeth Pitch: 3.1mm / 0.12inch, Teeth Depth: 2.3mm / 0.09inch, Module: 1 Mod, Pressure Angle: 20°
Material - The spur gear is made of Aluminum Alloy, more stable, anti-wear, strong and durable, and durable in use.
Feature - Good machining made less roughness and noise than other gears that make them roll smoothly. Good pinion gear replacement for your device.
Application - The spur pinion gears are widely applicable in various of Electric Grinders, Gearbox, Reduction Gear, and Gear Reducer.
Note - Please confirm the size of the product before purchasing.
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| HJZ-US | 5.73 | ❌ | ❌ | ❌ |
Name: 1.5Mod Spur Gear with Step
Material: #45 steel
Tooth Thickness: 12mm; Total height: 20mm
Teeth treatment: hardened teeth
Fixing set screw size: M5*5
| SELLER | SELLER SCORE | AMAZON FULFILLED | PRIME | FREE SHIPPING |
|---|---|---|---|---|
| HUoiio | 5.05 | ❌ | ❌ | ❌ |
Modulus: 0.5M, Teeth: 80T, Hole Dia: 4mm,5mm,6mm
Size: 41x10x4MM/1.61x0.39x0.16 Inch ( OD x H x ID)
Weight: 42g
The bevel gear is cast with exquisite production technology, the size is precise, the gear teeth meshing is complete and tight, and the power transmission ratio is stable
Widely used in conveying, agricultural equipment, textile machinery, printing machinery, CNC machines, 3D printers, models, robot DIY, automotive applications, etc.
As an online shopper, it's crucial to make informed decisions. This review will focus on Lippert Comp, a brand that has made its presence felt on Amazon. With its wide range of products in RV Steps, Lippert Comp has become a go-to for many shoppers.
Lippert Comp offers a vast product count of 36 items. This diverse selection caters to a wide array of needs and preferences, making it a versatile brand for consumers.
Quality is a defining factor for any brand. Based on customer feedback and ratings, Lippert Comp's products have an average rating of 3.4 out of 10, indicating a high level of customer satisfaction.
When it comes to pricing, Lippert Comp has products ranging from a minimum price of $5.68 to a maximum of $123.19, with an average price of $29.83. This pricing structure caters to a wide range of budgets, making Lippert Comp an accessible choice for many shoppers.
Customer service is the backbone of any successful online brand. Lippert Comp is sold by jis inc ✅ and amazon.com, who are known for their commitment to customer satisfaction. They have been responsive and helpful, according to customer reviews and feedback.
The shopping experience on Amazon with Lippert Comp has been largely positive. The brand's wide range of products, combined with the ease of navigation on Amazon, has made shopping a breeze for many customers.
Delivery and packaging are yet another aspect where Lippert Comp shines. Items are delivered in a timely manner and the packaging ensures the products reach the customers in pristine condition.
In conclusion, Lippert Comp offers a wide range of quality products at varying price points, making it a brand worth considering for your next Amazon purchase. Their commitment to customer service, combined with a seamless shopping experience, makes Lippert Comp stand out in the crowded Amazon marketplace.
Based on the analysis of product range, quality, pricing, customer service, shopping experience, and delivery, we rate Lippert Comp [3.4 out of 10 stars].
PickSmartly is dedicated to creating a platform designed to streamline your shopping experience, empowering you to make well-informed purchasing decisions with minimal time and effort. At the heart of our mission is the commitment to earning and maintaining the trust of our users, as we believe this to be fundamental to the services we provide.
When you engage with our websites, services, or tools, we or our approved service providers may utilize cookies to store information. This is done to enhance your user experience by making it more efficient, secure, and tailored to your preferences, as well as for marketing objectives.
We are an Amazon Associate and earn commissions from qualifying purchases. Our participation in the Amazon Services LLC Associates Program, an affiliate advertising initiative, provides us with a means to generate income through links to Amazon.com and its affiliated websites. Please note that Amazon, Amazon Prime, their logos, and the Amazon Prime logo are registered trademarks of Amazon.com, Inc., or its associated companies.
