Best Mdt in 2026

PERFECT: These scope rings are a perfect fit for all Picatinny rails, perfect for mounting most standard scopes.

DESIGN: Complete see-through style construction, provides full visibility for open sights.

INSTALLATION: Just twist on & off the rail clamp screw nut with an Allen wrench & mount the base to a Picatinny rail.

RAPID ONE-HANDED Operation and Full Adjustment on the fly

ADAPTS To Any Terrain Creating Solid, Stable, and Accurate Positioning

4 LOCKING POSITIONS In 0 Degrees, 50 Degrees, 90 Degrees, %180 Degrees

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 0 Inches (25. 4 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.92 inches (23.4 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.45 inches (36.8 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.26 inches (32 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

Use this cantilever mount for mounting 30 mm telescopic sights.

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 26 Inches (32. 0 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torn-style socket cap screws for secure mounting.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.76 inches (19.3 mm) from the base. Will work with Picatinny and Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0. 95 inches (24. 13 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.

When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.

This Vortex Tactical Ring positions the center of the riflescope tube at a height of 1.18 inches (30.0 mm) from the base.

Detachable aluminum rifle scope mount rings

.987" high

1 inch tube diameter

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.

When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.

This Vortex Tactical Ring positions the center of the riflescope tube at a height of 0.97 inches (24.6 mm) from the base.

Steel construction

Will fit Weaver style scope bases

1 inch rings

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.

Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.

Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Model #120181 - Mark 4 Rings 34mm High (Aluminum) with a Matte finish

Compatable with Leupold PRW bases or any other Picatinny-style mount rails

Machined from solid steel

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

Easy operation: simply open the tool, place the fiber in the proper groove, Lock the tool, and either pull the fiber through to slit, or rotate the tool around the fiber to ring

Versatile use: The slitter has 5 different sized precision grooves to accommodate cables 5 - 10 mm in diameter without damaging the fiber inside

Specially designed: for use on Corning fiber cables: minixtend fast access binder less, HD minixtend, and other similar styles

Black Aluminum Xtreme Tactical Rings

Size: Medium, 30 mm; Height: 1.10 in; Rings per Set: 2

Fits on any Weaver or Picatinny-style mount

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the rail mount

30 mm diameter rings for mounting standard 30 mm rifle scope tubes

Mount base mechanism comes equipped with custom locking bolts that slot seamlessly into your rail system with zero wiggle - guaranteed to hold zero against the toughest of recoil. Avaialble for either Picatinny or Weaver bases.

Model #174081 - PRW Weaver-Style Cross-Slot Rings 1" Medium with a Matte finish

Compatable with Leupold QRW bases or any other Picatinny-style mounting rails.

Includes all mounting screws

Model #49901 - Standard Rings 1" Medium with a Matte finish

Designed to match up with Leupold STD 1-piece or 2-piece bases

5 ring heights available

Model #49959 - Standard Rings 30mm High with a Matte finish

Designed to match up with Leupold STD 1-piece or 2-piece bases

5 ring heights available

this is a nationwide distributor of firearms and shooting sports accessories

Seekins Precision, Scope Ring, .82" Low, 30mm, 4 Cap Screw, Black Finish

This product is manufactured in United States

Sport type: Hunting

Weaver Style

1 inch pair of rings

The package length is 12.7 centimeters

The package height is 4.064 centimeters

The package width is 8.89 centimeters