Best Mj May in 2026

Package length :2.7 cm

Package width :12.7 cm

Package height :15.2 cm

High-performance urethane flat belting

Easy to use

Manufactured in united states

Size: Inner Girth: 38"/963 mm; Outer Girth: 1001mm; Top Width: 10mm; Thickness: 6mm

Material: It is made of neoprene rubber for resistance to oils, water, and some solvents.

Function: To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.

✿150XL037 Timing Belt: The package contains 2 x 150XL037 drive belt, teeth qty: 75, teeth pitch: 0.19" / 5mm, belt width: 3/8" / 10mm, belt internal perimeter: 15" / 381mm.

✿Neoprene Body: 150XL037 belt main body is made of neoprene, without lubrication or re-tensioning, can resist dust, grease, oil and moisture.

✿Smooth Transmission: The tooth surface of the XL timing belt is made of nylon, with smooth transmission, low noise, and can transmit power at a constant speed without slipping.

DESIGNED & TESTED BY POLARIS – With 20,000 miles of field testing and 18+ months of development, Polaris OEM Parts are proven to run cooler and at optimal RPMs to ensure maximum vehicle performance and ultimate durability.

BUILT FOR ALL TERRAINS – Polaris Drive Belts are made to withstand all terrains your adventure might take you such as mud, dirt, trails, sand, rocky paths and more. The suggested replacement period is every 6 months, 50 hours or 1,000 miles.

STURDY & RELIABLE – Polaris belts are made to last and hold up under the power of the RZR 1000. Engineered to run at the optimal RPM and deliver unmatched performance for your off-road vehicle. Developed and tested for all environments & conditions.

High-Performance Urethane Round Belting, impact resistance, anti-oil, water

It can replace traditional rubber products such as glass fiber insulation materials wood

Used for drive transmission in packaging machine, printing machine, spinning machine, drive motor, porcelain brick etc

♛Power Twist Belt 0.5 inches x 5-feet, Adjustable length，Industrial Transmission Belt .

♛Perfect for lathes, drill press, table saws, bandsaws and other woodworking machinery,Agricultural Equipment, snow blower,warehouse and packaging system

♛Special PU linked V belt is made of polyurethane and polyester composites, durable. Well-tested by the manufacturer. The long-lasting upgrade to rubber belts in any power transmission applications.

Quality power transmission belts at a cost competitive price

Model Number: 3L270

Item Product Dimension: 12.0" L x 12.0" W x 1.0" H

Belt 3LK 3/8 x 27in OC

Package Dimensions: 1.016 L x 33.02 H x 20.32W (centimeters)

Package Weight : 0.113 kilograms

Long-life friction resistant cover

Static and oil resistant

High strength tensile cords designed for minimal tension decay and low maintenance

Country of Origin : China

Product type - outdoor living

Timing belt xl 0.37 x 16In PL T80

【SPECIFICATION】 : Number of Teeth: 120 , Belt Width: 0.37" , Pitch: 0.200" , Belt Thickness: 0.09" .

【HIGH QUALITY MATERIALS】- Adopts high-quality neoprene belt body , has good grease resistance, heat and cold resistance ,aging resistance,high tooth shear resistance.

【GOOD TRANSMISSION PERFORMANCE 】- Smooth transmission, vibration absorption, low noise, large transmission ratio range, high transmission efficiency, also suitable for multi-axis transmission.

Size: Pitch Length: 24"; Outer Girth: 620mm; Top Width: 10mm; Thickness: 6mm

Material: It is made of neoprene rubber for resistance to oils, water, and some solvents.

Function: To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.

Link belt can be installed on pulleys to get rid of the clattering of an old machine. Be sure to roll on the pulley with tips of the belt point to the inside, it won't work when installed reversely.

These V belts offer freedom to adjusting length and replacing failed sections. A lot effort can be saved if you use needle nose pliers to do it. Then they can be rolled onto a drive just like a bicycle chain.

To re-tension, just roll the belt off, take out a link and roll it back on

Long-life friction resistant cover

Static and oil resistant

High strength tensile cords designed for minimal tension decay and low maintenance

The belts exceed USA RMA published ratings levels. They are designed to perform at the identical or higher level than all other major USA Manufacturer's belts of the same type

Belts may not come in a cardboard sleeve

The lower, compression section of the belt is made of highly fiber reinforced, oil and heat resistant

Belt A/4L 1/2 x 36in OC

Product type - belts

Made in china

Made from FDA compliant materials

Premium Eagle Urethane

Belt poly J 27In PL 8 rib

Country of Origin : China

Package Weight: 0.1296 pounds

Wrapped construction provides smooth, quiet operation

Formulated for maximum flexibility with smaller diameter sheaves

Oil and heat resistant. Static conducting

Product Type :Belts

Package Dimensions :12.0 " L X12.0 " W X1.0 " H

Country Of Origin :China

Belt Poly K 29.75in OC 5 Rib

Manufactured by D&D Power Drive

Made in china

Made from FDA compliant materials

Premium Eagle Urethane

flat Mixed Package 40-135mm Length Drive Belt , 2mm belts wide, flat and consistent.

Perfectly replace the original belt.

Made from high-quality rubber material, flexible and durable.

Country of Origin : China

Package Weight: 1.0 pounds

Belt A/4L 1/2 x 52in OC

Country of Origin : China

Product type - belts

Belt poly J 28In PL 4 rib

【Parameter】- Inside Girth:660mm/2.17feet; Top Width:10mm/0.39inch;Height:6 mm/0.23inch;Material:Rubber;

【Application】- Perfect for lathes, drill press, table saws, bandsaws and other woodworking machinery, agricultural equipment; Mainly used in the power transmission of mechanical equipment driven by electric motors and internal combustion engines;

【Advantages】- The outside fabric wrap is treated with highly oil and heat resistant,specially engineered,twisted, heat and set rubber material;

Package length :2.7 cm

Package width :12.7 cm

Package height :15.2 cm

Long-life friction resistant cover

Static and oil resistant

High strength tensile cords designed for minimal tension decay and low maintenance

Meets or Exceeds OEM Specifications; Proprietary long-life EPDM rubber compound formulation for quiet operation

Radial cog design increases efficiency and reduces cracking

Precision ground ribs for maximum pulley contact