Best Molence in 2026

2 Pins 3Pins 4Pins 0.1" Pitch Screw Terminal Block Connector.

Rated Voltage: 150V; Rated Current: 6A.

Screw terminals accomodate wire sizes from 18AWG to 26AWG.

1. These Metallized Polypropylene Film Capacitor kits including 180PCS 15 different values: 0.01uF 400V, 0.022uF 400V, 0.033uF 400V, 0.047uF 400V, 0.1uF 400V, 0.15uF 400V, 0.22uF 400V, 0.33uF 400V, 0.47uF 400V, 0.56uF 400V, 0.001uF 630V, 0.0022uF 630V, 0.0033uF 630V, 0.0047uF 630V, 0.068uF 630V to fulfill your variety requirement.

2. Capacitance Tolerance: ±5%.

3. The inherent geometry of film capacitor structure results in very low ohmic losses and a very low parasitic inductance.

1% tolerance,1/2 Watt, Metal film resistors，5 Color ring resistance.

Diameter: 3.3±0.3mm, Film Length: 9.0±0.5mm, Pin Length: 26±2mm.

10 pcs each of the following standard values: 1Ω~910Ω; 1KΩ~910KΩ; 1MΩ; 1.5MΩ; 2MΩ; 3MΩ.

This kit Includes 5162pcs of the most important and useful electronic components. Would be a great gift for a family member or friend who tinkers with electronics.

2600PCS 1/4W 1% Tolerance Metal Film Resistor; 200PCS Electrolytic Capacitor; 480 PCS Monolithic Ceramic Capacitor; 200PCS TO-92 Transistor; 127PCS Integrated Circuit IC; 200PCS Inductance; 10PCS WH148 Potentiometer; 200PCS 3mm/5mm LED; 200PCS Diode; 85PCS PCBs Kit; 560PCS Jumper Wire; 28PCS Tactswitch; 1PCS Electrostatic Clamp; 150PCS Adjustable resistance; 1PCS Breadboard; 120PCS Dupont Line.

100% compatible for Arduino UNO, MEGA, Raspberry Pi, PLC, Microcontroller.

1% tolerance,1 Watt, Metal film resistors，5 Color ring resistance.

Diameter: 4.5±0.5mm, Film Length: 11.5±1.0mm, Pin Length: 26±2mm.

10 pcs each of the following standard values: 1Ω~910Ω; 1KΩ~910KΩ; 1MΩ; 1.5MΩ; 2MΩ; 3MΩ.

Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits

Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer

Positive distribution bus with #10-32 stud

The VLT6 is a revolutionary tilting TV mount. Large TVs installed on traditional tilting mounts often hit the wall, limiting the maximum tilt range.

The VLT6 extends from the wall 5.7", getting you the maximum tilt possible for your TV. The extension allows even the largest of TVs to achieve the maximum listed tilt range. More tilt translates to better glare reduction, think a better viewing experience.

Open wall plate design, allows for the VLT6 wall mount to be directly mounted over electrical outlets for a clean and streamlined look.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Assembly for Solar Combiner or Power Distribution

UL 600V Rating

UL 6-20 AWG Rating

Fourteen connections with 2 x 5/16" stainless steel studs and 12 x #8 stainless steel screws. Comes with 4 x 8AWG 5/16”, 4 x 10AWG 5/16”and 24 x #8 insulated ring terminals

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Easy Practical: Great for connecting wires without soldering, just push the stripped conductors into the connector and screw on.

Safety Durable: Wire connectors grab the wires firmly and make a solid connection, Spring inserts flame retardant housing with good insulation and minimum aging.

Save Time: Pre-twisting wires are not required, but we recommend twisting the conductors first, which will make the connection more reliable and tighter.

【Safety】Terminates 28-12 AWG；Rated Voltage: 250V/4KV; Rated Current: 32A. Long life, no corrosion, aging resistance, pressure resistance, high temperature and normal work. There is a test hole on the back of the compact splicing wire Connector. Test holes can be used to check if the wires are energized.

【Efficient】 No tools required in use, one plug can be used, greatly reducing the wiring work time. In fact, for home decoration, after the vertical connection terminal technology, each wire connection will save the wire length of about 500px , saving more than 80% of working hours, the comprehensive cost is greatly reduced.

【Universal compatibility】 Suitable for soft and hard single-strand and multi-strand. Widely used in lightings, fans, automatic doors and all small appliances.

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal block that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Two connections with M5 stainless steel studs and 5 x #8 stainless steel screws. Comes with 1/4”, #8 insulated ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC.Max continuous amperage: 80A AC/100A DC.Max intermittent: 20A per connection

4 Gauge input - (4) 4 Gauge terminals (as pictured)

Gold plated for maximum conductivity

Set screw style to ensure tight wire fit

1/4" Stud - 12 Terminal Black Power Distribution Block For a Variety Of wiring Scenarios

Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4

12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments

Two connections with 5/16" stainless steel studs and 1 x #8 stainless steel screws. Comes with 8AWG 5/16” ring terminals, #8 insulated ring terminals and stainless steel screws

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC. Max intermittent: 20A per connection

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

Five connections red busbar with 5 x 3/8" stainless steel studs. Five connections black busbar with 5 x 5/16" stainless steel studs. Comes with 5 x 8AWG 3/8”, 5 x 8AWG 5/16” ring terminals.

Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits.

Max voltage:300V AC/ 48V DC. Max continuous amperage: 130A AC/150A DC.

8 Circuit 20 Amp AC/DC 300V AC/DC Terminal Block

Closed back design completely insulates power from the mounting surface

Each screw pair is one isolated circuit

Product Name : Barrier Terminal Block;Model No. : TB-2512;Material : Metal, Plastic

Rated Value : 600V 25A;Poles : 12P (Dual Row)

Size : 164 x 30 x 19mm/ 6.5" x 1.2" x 0.7" (L*W*T);Fixing Hole Diameter : 4mm/0.16"

8 Circuit 30 Amp AC/DC 600V AC/DC Terminal Block

Closed back design completely insulates power from the mounting surface

Each screw pair is one isolated circuit

★【What You Get】 - In this terminal block set,it include 6pcs 4 positions 600V 15A double row screw terminal strip blocks with cover,6pcs 400V 15A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors,1pc screwdriver.Total 73pcs packed in a bag.

★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4 individual connections or by using the whole barrier bar or part of it up to 4 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals.

★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable.

16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections.

Rated current 16 Amp(total input or output), Maximum voltage 48V

A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn plated. Pin header and Cage - Brass.

Fully Customizable Kit

UL Listed 600V

UL Listed 12-22 AWG

Pack of Six Creative Hobbies Item# ELT5561A Medium base E26, keyless lamp sockets.

Sockets have removable female thread hickey brackets (tapped 1/8 IP).

Terminal screws backed out and color coded for easy wiring.

Terminal Block Breakout Module - for Arduino UNO R3. the item has been soldered and assembled.

Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.

Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.

STRENGTH MATTERS:A product is only as good as the materials it’s made from.The eyelet terminals are made of 100% copper that has been annealed.Provides maximum conductivity.Achieve rock-solid connections.

BUILT LIKE A TANK:The copper ring terminals surface with tinned and passivation treatment to improve conductivity.The good-quality and high-purity copper determines that it has more wear-resistant, durable and anti-corrosion properties than ordinary copper wire lugs.Even in the small details,this copper lugs stands out from the crowd - The flared design allows for visual inspection of correct insertion,making wire insertion easier.

LONG TERM RELIABILITY:Tested to UL Listed and ABYC safety standards.The haisstronica's eyelet terminals can handle voltages up to 600 Volts at 275 Degrees F.and higher currents than common copper lugs amps.Why? Because whether your working on a car,truck,boat,or RV,you what to know that your equipment can handle whatever you throw at it.