Best Muge Racing in 2026

WIDE APPLICATION - NOLY ONT FIT E85!The MUGE RACING nylon braided fuel line hose can be used as transmission oil cooler line,fuel return line,fuel supply line,coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line and can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel.

WORK CONDITION - Maximized resistance to heat, corrosion and abrasion.The operating temperature range of CPE hose is -40°F to 257°F (-40°C to 125°C). Maximum working pressure (psi): 500 psi. Burst pressure (psi): 2000psi.The CPE fuel line hose can stand high-temper, and pressure, with long-lasting lifespan,Please check the working pressure and temperature of your system before purchase.

FLEXIBLE & DURABLE - The black braided nylon fuel line is braided with outer nylon braided, center stainless steel, Inner synthetic rubber. The construction enhances flexibility and give a cool racing appearance,The fittings and hose separator for the fuel line is made of T6061 Aluminum, anodized finish for high strength and good durability.

ANTI-CORROSION - This fuel line T-fitting adapter is made from 304 stainless steel that prevents Corrosion.

LEAK-FREE - The barbed design increase the sealing of adapter and fuel line and The two hose clamps are for installation in tight-fittings and secure the vehicle’s fuel line to the barbed fittings for a leak-free connection.

FUNCTION - Fuel line fuel pressure barbed push lock t-fitting adapter allows users to install a fuel pressure sensor to a 3/8 In inner diameter fuel line,T-fittings allows you to tee off your vehicle,s fuel line for accurate fuel pressure readings directly from the source.Protect your engine!

√ SPECIFCATION - Polished stainless steel,2 inch inside diameter inlet, 3 inch outlet, 14.8 inch overall length. (NOTE:Universal muffler fit 2" OD pipe, but will not fit 2" ID pipe. You can choose Butt joint, Lap joint, or muffler seal clamp, U bolt clamp. Please measure the OD of your exhaust pipe and you have enough space to install before ordering.)

√ FUNCTION - The exhaust tip can not only prevent the deformation of the car exhaust pipe, but also play the role of supercharging and turbulence. It can also reduce the noise emitted by the exhaust pipe to a certain extent and make the sound slightly soft and pleasant.

√ DECORATE YOU CAR - After installing,the whole car looks neat and handsome,The only flaw in the charming car body has been made up for.Your car will definitely stand out from the crowd.

【COMPATIBLE WITH】This air filter fit for most universal car and vehicles with 23mm air intake.

【PREMIUM MATERIAL】The Car Air Filter is made of metal, filter paper and rubber material. Easy to clean, lightweight and durable.

【FUNCTION】The car air filter can increase the intake air flow, filter the impurities in the air.Reduce the resistance of the engine air intake, and improve per unit time air intake and volumetric efficiency when engine running.

【COMPATIBLE WITH】This air filter fit for most universal car and vehicles with 23mm air intake.

【PREMIUM MATERIAL】The Car Air Filter is made of metal, filter paper and rubber material. Easy to clean, lightweight and durable.

【FUNCTION】The car air filter can increase the intake air flow, filter the impurities in the air.Reduce the resistance of the engine air intake, and improve per unit time air intake and volumetric efficiency when engine running.

Design: The Spherical design will make you feel very satisfied with every touch. Carbon Fiber Gear Shift Knob is easy to hold and shift. As the Angle of light changes, you can appreciate the subtly woven carbon fiber inside. You'll need it to decorate your driver's seat.

Material: The Carbon Fiber Shifter Knob is made of high quality of carbon fiber、acrylic and aluminum alloy. The unusual arrangement of carbon fibers can add an Unique element to your car.

Size: The gear shift knob diameter：52 mm/2.05 inches, mounting hole: M 12*1.25, length: 52 mm; 3 adapters (M 8*1.25, M 10*1.25, M 10*1.5). Please check the adapter size before placing an order.

* Design: Pink round ball shift knob with bubble inside and a color aluminum base. The Pink crystal bubbles add color and funny to your drive-time. You'll need it to decorate your driver's seat.

* Material: The gear shift knob is made of acrylic and aluminum alloy.

* Size: The gear shift knob diameter：55 mm/2.16 inches, mounting hole: M18*1.5; Size of adapter: 8 MM；10 MM；12 MM. Please check the adapter size before order.

Design: The Spherical design gives you a smooth touch every time. Special black billiard ball shape, let you feel the excitement of mastering an important ball.You'll need it to decorate your driver's seat.

Material: The shifter knob is made of resin and aluminum alloy. Before ordering, must confirm the screw size!! If you have any questions, please send us message. ^-^ It's our pleasure to help you.

Size: The gear shift knob diameter ：57mm/2.24 inches, mounting hole: M12*1.25; Size of adapter: M8*1.25; M10*1.25, M10*1.5, please check the adapter size before placing an order.

Design: The Spherical design will make you feel very satisfied with every touch. Carbon Fiber 6 Speed Shift Knob is easy to hold and shift. As the Angle of light changes, you can appreciate the subtly woven carbon fiber inside. You'll need it to decorate your driver's seat.

Material: The shifter knob is made of resin and aluminum alloy.

Size: The gear shift knob diameter：51 mm/2 inches, mounting hole: M 12*1.25; Size of adapter: M 8*1.25, M 10*1.5, M 10*1.25, please check the adapter size before placing an order.

Design: Carbon fiber Shift Knob has an elegant slender body. The long pole ergonomic designed will make you feel very satisfied during use. No logo, personalized, cool and fashion with long weighted style, enhance your vehicle interior.

Material: The shifter knob is made of high quality of carbon fiber、acrylic and aluminum alloy. As the Angle of light changes, you can appreciate the subtly woven carbon fiber inside. You'll need it to decorate your driver's seat.

Size: The carbon fiber shift knob diameter：33 mm/1.29 inches, length: 130 mm, mounting hole: M 18*1.5; Size of adapter: 8 MM、10 MM、12 MM. Please check the adapter size before placing an order.

√Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.

√ Manufactured with High Quality Silicon to Ensure an Air Tight Seal.

√ Molded to Factory Dimensions for a Perfect fit.

APPLICATION - FOR THE LS1 LS2 LS3 LS6 INTAKE FOR CABLE DRIVE ONLY.

FEATURES - Throttle body optimizing more airflow to your engine.A large throttle body is important to making additional power throughout the entire rev range on forced induction / naturally aspirated vehicle.

These units are good for huge horsepower increase along with improved throttle response,Made from machined T6 Aluminum Alloy.

★【Universal Shift Knob Adapters】: Universal gear shift knob screw adapter is designed to convert the threaded knobs size to fit different vehicles.

★【Perfect Size & Premium Material】: Made of high quality Brass, this Shift Knob Adapters kit are more sturdy and durable.

★【Adapters Size】: 1*M8 X 1.25, 1*M10 X 1.25, 1*M10 X 1.5 shift knob adapters.

EXTRA STABILITY-ANTI SLIP - The bottom of the jack stands pad has a textured and rubberized surface to avoid any slippage from a jack.

A MUST FOR PROTECTING YOUR CAR - MUGE RACING Jack pad adapter is designed to be sturdy enough to support your car.It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components.

PORTABLE - Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads, and unfortunately bend your pinch/scrape off paint on the welds.

*Anodized Aluminum Material:Made of T-6 Aluminum and Stainless Steel,Outside Diameter: 1.25 Inches.100% Test Before Shipping to Ensure Product Safety.

*Design and Adavance:Mini Latches are designed to create a strong connection with a small Look. The Hood Pin is able to withstand the pulling forces of 150 lbs. Determine the number of uses based on the actual usage scenario will be better~

*Auxiliary Means:These locking pins assists in fixing and tightening,like flipping license plate, make the lightweight hood stable when driving or turning. It is recommended to install a few more and keep the original lock.

*Anodized Aluminum Material:Made of T-6 Aluminum and Stainless Steel,Outside Diameter: 1.25 Inches.100% Test Before Shipping to Ensure Product Safety.

*Design and Adavance:Mini Latches are designed to create a strong connection with a small Look. The Hood Pin is able to withstand the pulling forces of 150 lbs. Determine the number of uses based on the actual usage scenario will be better~

*Auxiliary Means:These locking pins assists in fixing and tightening,like flipping license plate, make the lightweight hood stable when driving or turning. It is recommended to install a few more and keep the original lock.

★【Upgraded Custom Molded Mud Flaps】: Mud Flaps Splash Guards are custom-cut specifically for Tesla Model 3 (2017-2023). Carwiner Model 3 mud flaps look as if came with the car. Designed with automotive grade materials for a seamless look.

★【No Drilling for Install】: Custom made mud guards for model 3. Install in the original hole position. No drilling required,remove the original screws, vehicles align the original car hole mounting screws, fixed, and finish.

★【Excellent Full Protection】Protect your Model 3 's doors and rear quarter panels from rock chips and other road debris that is thrown up from your tires. With a very OEM look，mud flaps splash guards are keeping car body clean and safe. Essential accessories for your tesla model 3 2017-2023.

【HIGH QUALITY MATERIAL】The steering wheel trim is made of high-quality ABS plastic material. And the surface is made of carbon fiber pattern.

【SUITABLE FOR】Fit for Tesla model 3 and model Y.

【PROTECTION FUNCTION】It can protect the steering wheel from scratches and wear. And make your steering wheel look different.

Design: Carbon Fiber Shift Knob is designed specifically for 6-speed manual cars. Finely and exquisitely crafted, our engineering team designs it with human ergonomics for your hand comfort while driving.

Material: The shifter knob is made from High Quality Aluminum and 100% Real Carbon Fiber. As the Angle of light changes, you can appreciate the subtly woven carbon fiber inside. You'll need it to decorate your driver's seat.

Size: Measuring at 3.6" (H) x 1.4" (Diameter), mounting hole:M20*1.5, our weighted shift knob is sure to please. Size of adapter: 8MM、10MM、12MM. Please check the adapter size before placing an order.

[Considerate Design]: The head made of professional magnetic material is convenient to take screws in the process of use or narrow gap. Double head design, to meet the use of most of the screws on the market.

[Reliable materials]: the mini screwdriver kit is made of steel material and a plastic shell handle, equipped with steel clips, reliable and stable, not easy to break, deform or rust, providing a long service life for you.

[Dual functions]: the mechanics pocket screwdriver adopts a special design of different functions on both ends.

Material: wear resistant microfiber leather with resin.

Size: 9.2cm*4.5cm - Detail Dimensions show in the picture.

Fits most Automatic Transmission shifters with 8mm thread diameter size (M8 x 1.25). The compatibility list shown in the picture is not fully complete so if your car model has an automatic transmission gear changer and has 8mm knob thread diameters size and has no boot cover or release button, it will most likely fit, please also check our size before buying!

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

Net Weight: 8oz (227g) per cartridge

Height: 7. 25” Diameter: 2. 6”

Cartridge has a Notched Collar providing easier alignment in portable gas burners!

ID: 3/8inch (10mm),OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 11.12 mm (0.44 inch), Outer Diameter: 17.2 mm (0.68 inch)

Working Temperature: -40°F to +300°F

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 5.56 mm (0.22 inch), Outer Diameter: 11.17 mm (0.44 inch)

Working Temperature: -40°F to +300°F

ID: 1/2inch (13mm);OD: 0.75inch(19mm).Material: NBR.

Working Pressure: 217psi.Max Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 4.7inch(120mm).

Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

ID: 3/8inch (10mm);OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

25 Feet of multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line

Can be used with unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E-85 and sour gas

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

ID: 5/16". OD: 0.43inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000 psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.