Best Narex in 2026

6 piece set comes on a wooden presentation box

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Contains the following sizes: 6, 10, 12, 16, 20 and 26 mm

Made by a small tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Contains the following sizes: 6 mm (1/4"), 12 mm (1/2"), 20 mm (13/16") and 26 mm (1 1/32")

To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes.

Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.

Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails.

Marking/striking knife is manufactured by small and highly respected edge tool maker in Czech Republic

Blade made from highly allowed Mn-V steel and heat treated to HRc 61

Blade is .055" thick and .410" wide

To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes.

Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.

Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails.

Made by a small tool manufacturer in the Czech Republic

Blade is made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

50 mm (2") wide blade

This is a square blade birdcage scratch awl made by a small Czech firm.

It has a beautifully turned stained beech handle with steel ferrule and a high carbon tool steel blade.

Blade length is 3 1/2", handle length is 2 1/2" with a 1 1/2" diameter.

Made by a highly respected edge tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Available in sizes from 4 mm to 12 mm

To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes.

Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.

Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails.

To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes.

Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.

Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails.

Made by a highly respected edge tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Available in sizes from 3 mm to 50 mm

Mallet made by a highly respected tool manufacturer in the Czech Republic

Head measures 3 3/4" in diameter

Wood is finished European Beech.

Made by a highly respected edge tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Available in sizes from 3 mm to 50 mm

To commemorate its 100 anniversary, Narex developed a new line of Richter Extra Chisels named after their founder. The Richter Extra chisels are the finest chisels Narex has produced in its 100-year history. This line of chisels are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes.

Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance.

Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails.

Made by a highly respected edge tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Available in sizes from 6 mm to 50 mm

This professional spoon carving gouge is manufactured by highly respected cutting tool manufacturer in Czech Republic.

This is a 20 mm 3/4" wide spoon carving gouge

Blade is made from chrome-silicon alloy steel and heat treated for hardness of 59 HRc

Made to our specifications by a highly respected tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Blade sizes are true imperial 1/4", 1/2". 3/4" and 1"

Made by a small tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

6 (1/4"), 8 (5/16"), 10 (3/8") 12 (1/2"), 16 (5/8") 20 (11/16") , 26 (1" 1/16"), 32 (1 1/4") mm

Starter 5 piece carving set manufactured by small tool maker in Czech Republic.

Set includes single bevel skew, shallow gouge, carving gouge, deep gouge and straight V Tool

All chisels blades are made from hardened carbon steel and heat treated to HRc 55

Made by a small tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Set included 3, 4, 6, 8, 10, 12, 16, 20, 26, 32, 40 and 50 mm

Made by a small tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Contains the following sizes: 4mm, 5mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm and 16 mm

【Features】: Mens guayabera shirts features long sleeve, spread collar, linen cotton fabric, solid color, reguler fit, button closure, geometric embroidery pattern, classic guayabera look design make you look more gentleman and handsome.

【Material】: 70% cotton+30% linen. Cotton Linen shirt is comfortable and breathable, greatly soft, skin-friendly, breathable sweat-absorbent and easy to clean. It's a good choice during the hot summer and spring.

【Match】: You can pair with a suit and dress pants to creat a business style, and it can also pair with vest, shorts, slippers, and sunglasses to creat a casual beach style. The classic design looks great with a variety of styles.

Made by a highlly respected cutting tool anufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Blades ground with acute 35 degree angles along both sides of the blades for clearance into corners

Made by a highlly respected cutting tool anufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Blades ground with acute 35 degree angles along both sides of the blades for clearance into corners

Made by a small tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Contains the following sizes: 4mm, 5mm, 6 mm, 8 mm, 10 mm and 12 mm

Made by a highly respected edge tool manufacturer in the Czech Republic

Blades are 9 1/2" long, made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Available in true imperial sizes from 1/4" to 1 1/4"

Made by a small tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Contains the following sizes: 8 mm (5/16"), 10 mm (3/8"), 16 mm (5/8") , 32 mm (1 1/4") mm

This is a Premium 6 piece set contains the following sizes: 6 mm, 10 mm, 12 mm, 16 mm, 20 mm and 26 mm.

Packaged in a wooden presentation box

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Contains both right and left skew chisel 6 mm 1/4" wide

Made to our specifications by a highly respected tool manufacturer in the Czech Republic

Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59

Blade sizes are true imperial 1/8", 1/4", 3/8", 1/2", 5/8" 3/4", 7/8" and 1"