Best Nexadd in 2026

NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!

Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm).

Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes and other makes and models.

Disconnects Fuel Line and EVAP Line Fittings with Tabs that Must be Depressed to Disengage.

Low-profile design with 85° bend allows the tool to fit between the top of the fuel tank and vehicle.

Works great on Delphi two tab connectors and some import vehicles.

Contains 8 popular disconnect tools for A/C and fuel lines

A complete set of disconnect tools that can be stored in a handy blow-molded case

All disconnect tools are also available individually

Wide range of professional automotive specialy tools

Professional grade

Heavy duty design

Easily disconnects air conditioning lines and quick connect fuel lines

Tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line

Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler

The sockets reduce the possibility of fuel leaks and prevent damage to fitting, fuel rails, and fuel line

Package Dimensions: 2.8 L x 18.4 H x 10.6 W (centimeters)

Package Weight : 0.433 kilograms

Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more

Smallest size also works on automatic adjusting air suspension systems for automobiles

Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment

[ Fitment ] : 3/8'' size Compatible with 2003 - 2010 Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS.

[ Fitment ] : 1/2'' size Compatible with Ford Super Duty Trucks, F250, F350 and F450.

[ Material ]：Made of High quality aluminum .

GREAT COMPATIBILITY: 19mm socket specifically design to fit for all Detroit Diesel DD13, DD15 & DD16 High Pressure Fuel Lines.

HIGH QUALITY: Constructed from high standard steel with reinforced and heat treated, resisting rust, corrosion and tear, ensures an unparalleled long lifespan!

ALTERNATIVE NO.: Alternative to W47058090900

WIDELY USE: This fuel line disconnect tool set for disconnecting fuel lined, automotive ac hose, air conditioning lines, radiator and heater hoses.

DIFFERENT DISCONNECTORS: 6pcs transmission oil cooler line remover.4pcs quick AC fuel line remover. 7pcs fuel line remover for disconnecting 1/4", 5/16", 3/8", 1/2", 5/8", 3/4“ and 7/8" fuel line.

FUEL LINE DISCONNECT SCISSOR TOOL: For 5/16”and 3/8”GM, Ford, and Mazda Vehicle Fuel Lines for a simple and fast separation of quick disconnect couplings and/or fittings.

JIC 8 AN 3/4-16 male thread flare to 3/8 inch SAE quick connect female push on fuel line adaptors tube hose connector

Manufacture from high performance lightweight 6061-T6 cnc machined billet aluminum material.

Black Anodized Finish for Durability and Strength

Use with 5/16 inches, 3/8 inches or 1/2 inches adapters from the Lisle 37000 or 39400 disconnect tool sets

The pliers can also be used to reconnect stubborn lines or connections that are in hard-to-reach areas.

Features a unique design providing extra leverage when disconnecting quick connect coupling air conditioning and fuel lines.

OTC's scissors type fuel line disconnect tool makes short work of hard to release fuel line connectors

Super compact, low profile 3-1/2 inch long tool fits in the tightest spaces to release fittings on fuel rails, fuel filters, sending units, and more

Double ended tool accommodates 5/16 inch fuel lines on one end, and 3/8 inch lines on the other

[WIDELY USE AC & FUEL LINE DISCONNECT TOOL SET]-- A comprehensive disconnect tool set for separating automotive hose and fuel lines, work for almost fuel lines, air conditioning lines , air and oil pipes , radiator and heater hoses , simple push-on & pull-off action.

[DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8" line and hose removers, which cover all the most needed SAE sizes.

[DURABLE MATERIAL & HIGH QUALITY]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity.

These type of fittings are close to the firewall behind the engine and are difficult to turn with very little to hang onto to rotate

They only get worse over time with each heat cycle and deposit buildup

Tool engages the tabs and provides a better grip on the fitting

♣【What You Get】: This set includes 3 fuel line hose pliers, a 9 inch fuel filter caliper, a hose pipe clamp clip and a 80 degree disconnect pliers. Buying this set once is more time-saving and cheaper than buying it separately in a retail store.

♣【High-Quality Material】: The fuel filer caliper is cast from high-hardness carbon steel and heat-treated, which is not only high in strength but also durable. The metal surface has a black coating of anti-oxidation treatment, so it will not become dull due to rust. The handle is made of PVC material, can provide you with a comfortable grip, and will not slip easily.

♣【Ergonomic Design】: The spring design of the fuel filer caliper can help you save energy during operation, allowing you to complete the work with one hand. The curved jaws are specially used to remove the connectors on the tubing, which is faster and easier than other tools.

【Material】The fuel line plier is made of high-quality carbon steel material, strong and durable, not easy to break.

【Application】Suitable for releasing connections on fuel pipes during maintenance or when replacing fuel filters.

【Unique Design】The design of the handle accords with ergonomics, can save energy, even if used for a long time, it will not be very tired.

This 19mm Fuel Line Socket Compatible for Detroit Diesel DD13, DD15, and DD16 High Pressure Fuel Lines; Alternative to J48770 W47058090900.

Easy to use: Easily to use this 19MM High Pressure Fuel Line Socket, just required a 3/8 Inch Drive Wobble Extension tool.

Material: Made of superior material steel, resisting rust and corrosion.

Needle nose pliers design fits into recessed pin locations found on some GM vehicles.

Designed to prevent damage to the pin or anchor.

Also works on traditional clips. Integrated spring makes tool easier to use.

This Fuel Line Plier is suitable for hoses with plastic snap connectors, VW, Audi, Mercedes, Fiat, Opel/GM and others.

Material of this Fuel Line Plier: Stainless steel & Rubber

The fuel line plier is used For removal and replacement of the connections on the in-line fuel filter.

Hose Remover Pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners, etc.

Remove Fuel, Vacuum or Heater Hoses from 5/32”to 1/2”(4mm to 14mm) diameter

Designed to facilitate quick and easy access into tight areas

Remove AC & Fuel Line Disconnect Fittings - These 7Pcs are SAE standard includes 7/8 in., 3/4 in., 5/8 in., 1/2 in., 3/8 in., and 5/16 in. sizes to accommodate a variety of applications . Plastic Auto AC / Gas Set 1/4 – 7/8” Inch to quickly and easily disconnect air conditioning lines and quick connect fuel lines; If you are replacing or repairing the A/C or fuel line on your car or truck, the connectors require these tools

Scissor Fuel Line Disconnect Tool - Disconnect Tool Makes Fuel Filter Replacement Easily. Necessary for Fuel, Heater, and A/C line service on many late model vehicles. Use it to release locking mechanisms on 3/8” and 5/16” fuel lines compatible with 1989 and Newer GM, 1990 and Newer Ford,some 1990 and Newer Mazda Vehicles.The quick disconnect coupler fittings have locking mechanism inside outer housing that goes over lip of the fuel filter while tool gets under locking mechanism

Color-Coded AC Disconnect Fuel Line Disconnect Tool Set - Each fuel tool is color-coded by size for easy identification; Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.Silver 5/16-inch (8mm), Blue 3/8-inch (9.5mm), Gold 1/2-inch (13mm), Green 5/8-inch (16mm), black 3/4-inch (19mm), Red 7/8-inch (22mm)

The tools are color coded for sizing and spring loaded to remain on the A/C or fuel line

Package Dimensions: 13.335 L x 3.81 H x 10.16 W (centimeters)

Package Weight : 0.068 kilograms

FUNCTIONS: The Oil Cooler Line Quick Disconnect Kit provides 7 different sizes tool to remove/disconnect fittings on fuel lines, heater lines, AC cooling lines and other quick disconnect couplings.

FIT FOR VEHICLES: The AC Fuel line disconnect tools are compatible with most Ford, GM, Chrysler and Mazda models. It also fits for some other vehicles while the automatic transmission line is within the sizes.

EASY TO USE: The compact size is easy to grasp and the angled design allows to access the hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it.

NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!

Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm).

Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes and other makes and models.

DISCONNECTS FUEL & AC LINES QUICKLY - Easily disconnect quick connect couplings & fittings on many vehicles. Also fits push lock connectors on radiators and transmission lines.

QUALITY CONSTRUCTION - Chrome-plated zinc alloy steel provides strength and lasting durability.

COMFORT DESIGN - Easy grip handles offer you greater torque. Full metal scissor tools are compatible with most fuel filters.

COMPLETE: Our WINMAX tool set provides a comprehensive kit for separating standard sizes of automotive AC hoses and fuel lines, suitable for a large variety of domestic vehicles from Ford, Chevy, Dodge, and more

Features: Removing and disconnecting tools for pipe connectors. For air conditioning, fuel,air and oil pipes. Fits nearly all brands Includes a variety of tools needed to quickly disconnect fuel and transmission lines for most vehicles.

Contents: For use with most fuel lines, air conditioning lines, radiator and heater hoses Strong, light and durable aluminum construction Simple push-on & pull-off action Popular sizes 3/16", 3/8", 1/2", 5/8", 3/4" and 7/8".

[ Do Replacements Quickly & Easily ] With our fuel line disconnect tools you can do easy separation of quick disconnect style fittings. This fuel line tool makes fuel filter replacement fast and simple.

[ Fancy Features ] The coupler fittings feature a locking mechanism inside the outer housing that goes over the lip of the fuel filter while the tool gets under the locking mechanism and releases the inner lip.

[ Suitable For Different Vehicles ] This fuel line disconnect tool set will help you work on 5/16" and 3/8" fuel lines on 1989 and newer vehicles. This tool is necessary for fuel, heater and A/C line service on many late model vehicles.

Disconnect Tool Makes Fuel Filter Replacement Easily. Ideal for easy separation of quick disconnect style fittings making fuel filter replacement fast and simple.

Coupler fittings feature a locking mechanism inside the outer housing that goes over the lip of the fuel filter while the tool gets under the locking mechanism and releases the inner lip.Release the fuel line locking mechanism by listening for the slight “click” which means the tool has done its job allowing you to pull off the filter easily.

Designed for 5/16" and 3/8" fuel lines on 1989 and newer GM vehicles, 1990 and newer Ford vehicles and some 1990 and newer Mazda vehicles. This tool is necessary for fuel, heater and A/C line service on many late model vehicles.

Disconnects the fuel line from the fuel filter

Insert the two semicircular disconnects into the coupling

Connect the handle and depress to separate the fuel line from the filter