Best Nicelux in 2026

Thermally conductive adhesive tape is made of advanced thermal conductive PSA. They satisfy the demand of high adhesion and excellent thermal conductive efficiency by providing a preferential heat-transfer path between heat-generating components and heat sink or other cooling devices.

High tacky thermal conductive PSA. Only pressure is needed to form an excellent bond and thermal interface, effectively replace the grease and mechanical fixation.

The performance of thermal conductivity, insulation, buffer and high tacky make it as the best choice for electronic application.

NOT for PU / Epoxy cover waterproof--With 9.8 Feet 3 conductor flat wire ready, you can DIY both strip-to-strip-bridge(jumper) and strip-to-power-lead connector wire that is up to 3 meter long, no stripping or soldering needed

Just place strip light or wire above connector's pin, then press cap down by pliers, connection will be done well. Easily connect your dual color led strip to dimmer or controller

Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work

NOT for PU or Epoxy Waterproof -You can DIY both strip to strip bridge(jumper) and strip to power connector wire(pigtail) that is up to 3 meter long.Use it to extend strip light in different gap length and angles (mostly L shape 90 degree),flame retardant housing,copper pin,coolly work with 5A current(3V,5V,12V,24V)

APPLICABILITY -Make sure your strip light match this connector.1.protection type:IP20 Non-waterproof or real silicon waterproof,not for pu or epoxy cover waterproof,please check before you order. 2.single color 10mm wide SMD5050 / SMD5630 / SMD5730 strip light ranging 30~90 LEDs per meter or 120 * SMD2835/ 3014 /2216 /2010 per meter. 3.Support normal thickness double side back tape, red thick 3M VHB foam and blue thermal conductive tape

PIERCE TO CONTACT -Each of the 5 splicers has 2 ends,one end is for 10mm flex tape light(both IP20 and SILICON waterproof compatible),when snapping the cover, the pins can penetrate PCB from strip's back side, another end is for the 2 pin wire coming with,snapping the cover, the pins(blades) will cut into cable insulation to contact the wire core. No need soldering,no need stripping silicon waterproof cover and no need stripping wire insulation

Proven premium heatsink (more than 300 awards and recommendations from international hardware websites), now available in an all-black design that goes great with many colour schemes and RGB LEDs

Extra-wide 140mm dual-tower design with 6 heatpipes and dual fans provides maximum quiet cooling efficiency on a par with many all-in-one watercoolers, ideal for overclockers and silent-enthusiasts!

Dual-fan design with renowned, award-winning NF-A15 140mm fans with Low-Noise Adaptors and PWM for automatic speed control: Full cooling performance under load, whisper quiet at idle!

NEXT-LEVEL PERFORMANCE W/MAXIMUM HEAT CONTROL: The integrated heatsink disperses heat to maintain speed, power efficiency, and thermal control, preventing downtime from overheating on Playstation 5 and PCs

MAXIMUM SPEED: Powered by an in-house controller designed to harmonize the flash memory components and the interface for top speed – with a PCIe 4.0 interface that’s 2x faster than PCIe 3.0 SSDs and 12x faster than Samsung SATA SSDs

A WINNING COMBINATION: Achieve fully immersive gameplay with sustained high-performance bandwidth and throughput for heavy-duty applications in gaming, graphics, data analytics, and more

Get the ultimate gaming edge over your competition with insane speeds up to 7,300 MB/s(1) for top-level performance and radically short load times.

A range of capacities from 1TB to 4TB(2) means you get to keep more of today’s games that can take up 200GB(2) or more of storage.

The WD_BLACK Dashboard monitors your drive’s health, controls your RGB style and can automatically detect games to turn on Game Mode 2.0 (Windows only).

NEXT-LEVEL PERFORMANCE w/MAXIMUM HEAT CONTROL: The integrated heatsink disperses heat to maintain speed, power efficiency, and thermal control, preventing downtime from overheating on Playstation 5 and PCs

MAXIMUM SPEED: Powered by an in-house controller designed to harmonize the flash memory components and the interface for top speed – with a PCIe 4.0 interface that’s 2x faster than PCIe 3.0 SSDs and 12x faster than Samsung SATA SSDs*

A WINNING COMBINATION: Achieve fully immersive gameplay with sustained high-performance bandwidth and throughput for heavy-duty applications in gaming, graphics, data analytics, and more

Keep your high-end CPU, GPU, or console cool with premium thermal paste that effectively transfers heat between your processor and cold plate.

Low viscosity means XTM70 spreads evenly and cleanly with the included applicator kit, for easy application and peak thermal transfer on an Intel or AMD CPU or AIO cold plate.

Wipe away old paste from your processor and AIO cold plate with three included cleaning wipes.

SAFETY APPLICATION: SYY is metal-free and non-conductive, which eliminates any risk of short circuit and adds more protection to the CPU and VGA card.

BETTER THAN LIQUID METAL: It is composed of carbon particles and has extremely high thermal conductivity. It ensures that the heat generated by the CPU or GPU is effectively dissipated.

THERMAL COMPOUND: SYY thermal paste 2022 edition has excellent component heat dissipation performance and has the stability to push the system to the limit.

【EASY RELEASE NO RESIDUE】Clear Transfer Tape for Vinyl 12 inch that does not leave a sticky residue on your vinyl and won’t rip or tear your project! This Vinyl transfer tape is perfect alignment paper so your projects go on straight.No mess and no fuss!

【CLEAR RED GRID】The 1/2” see through red grid lines makes transfer tape for vinyl easy to measure and cut your vinyl transfer tape without waste. What's more, our transfer tape roll is also tear resistant.

【MEDIUM TACK】 Not too sticky that you can't transfer your designs, but sticky enough to easily lift your project and transfer it to your surface. Effortless, our transfer tape for vinyl is trouble-free and user-friendly for all project, even more smaller works.

RGB SYNC - The Hyper 212 RGB Black combines integrated RGB lighting effects with enhanced heat-sink upgrades making it the perfect choice for an air cooler with outstanding aesthetics and performance

DIRECT COOLING WITH GROOVED FINS - The primary heat exchanger features 4 embedded copper heat pipes (Ø6mm) in flat array and includes additional aluminium fins with lateral grooves upon the plate to further augment thermal conductivity

NICKEL-PLATED BLACK HEAT SINK - Offer superior heat radiation compared to regular aluminium fins Stacked fin array ensures minimal air resistance

Sleek Finishing: Anodized gun-metal black with brushed aluminum surface finish to the top cover for a more refined look

Nickle Black: The nickel plated jet black also enhances radiation cooling performance

Direct Contact Technology: 4 Heat Pipe with exclusive direct contact Technology effectively provides excellent heat dissipation; Air flow: 42 CFM; Noise level: 26.0 dBA

PROFESSIONAL GRADE ADHESIVE FASTENERS: These industrial strength hook and loop fasteners provide strong holding power designed for heavy-duty applications; safely holds up to 10 pounds

WATER RESISTANCE PROVIDES UNMATCHED VERSATILITY: With heavy-duty strength, these fasteners make the ultimate organization tool for mounting, hanging, storing, or securing items indoors or outdoors; adheres to most surfaces in the house and garage

LONG LASTING DURABILITY: Easy stick-on application is ideal for a broad range of surfaces and applications; special sticky back adhesive provides a secure and long-lasting hold

【Good Cooling Effects for Upgrade Your Computer PS5 with M.2 NVME NGFF Disk】- Specially designed for new M.2 M key or B key disks, this M.2 SSD heatsink is perfectly work with M.2 2280 SSD, fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, 980 PRO, SN850 SN750 SN570, Firecuda 530, Crucial P2 Crucial P5 Plus, etc.

【Easy to Install and Operate】 - With double-sided clip design, 6 adjustable height screws, and 2 spare screws are suitable for M.2 NVME SSD of various heights, stable installation, better protection of your M.2 SSD with good heat dissipation performance for PC / Play Station 5.

【Three Nano Thermal Pads】- Made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the M.2 SSD.

Officially licensed M.2 SSD for PlayStation 5 consoles (For PlayStation 5 firmware compatibility, please visit SN850 HS PS5 page on WD_BLACK site.)

All-in-one heatsink SSD design installs easily in the M.2 expansion slot

Hold up to 50 games with up to 2TB of added storage (Number of games based on a 36GB average per game. The number of games will vary based on file size, formatting, other programs, and factors. 1GB = 1 billion bytes and 1TB = one trillion bytes. Actual user capacity may be less depending on operating environment.)

Streamlined, more affordable redux line version of the award-winning NH-U12S heatsink

Slim 120mm size for excellent case, RAM and PCIe compatibility: fits most tower cases (158mm height), doesn’t overhang the RAM slots, doesn’t block the PCIe on most ATX and Micro-ATX motherboards

Quiet NF-P12 redux-1700 120mm fan with PWM for automatic speed control: full cooling performance under load, near silent at idle!

Heat transfer tape is a polyimide film tape with a high temperature resistant adhesive.

Heat resistant tape comes off clean，easy peal and no residue.

It's a heat sublimation tape for heat press,it's really indispensable when sublimating and the tape can do the job very well.

Speed reigns—Seagate’s FireCuda 530 dominates the SSD lineup, delivering pure performance, absolute power, the most advanced components, and unrivaled endurance

Exhilarating performance up to 7300MB/s—harness the full power of PCIe Gen4 speeds to dominate next-generation games and apps

Our fastest FireCuda SSD ever built for the ultimate in sustained, pro-level gaming and accelerated content creation—with transfer speeds up to 2x faster than PCIe Gen3 M.2 NVMe SSDs and 12x faster than SATA SSDs

Proven premium heatsink (more than 150 awards and recommendations from international hardware websites), now available in an all-black design that goes great with many colour schemes and RGB LEDs

Asymmetrical, single-fan design for dual-tower performance with high compatibility: 160mm height fits most tower cases, 65mm RAM clearance, does not block the PCIe slot on most ATX & Micro-ATX boards

Renowned, award-winning NF-A15 140mm fan with Low-Noise Adaptor and PWM for automatic speed control: full cooling performance under load, whisper quiet at idle!

DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install.

REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the SABRENT Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation.

UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink.

Lower temperatures for your M.2 SSD

Allows maximum read/write speed and extended lifespan

Fits both single and double sided M.2 2280 modules

Official Genuine AMD Branded Product

Supports Motherboard Socket: AM2/ AM3/ AM3+ / AM4

Aluminum heat sink with copper core base - Pre-applied thermal paste

❤M.2 heat sink 2-pack— Specially designed for desktop computers, this M.2 SSD heatsink compatible with M.2 2280 SSD, perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO, etc.

❤Double-sided cooling—Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10°C - 30°C cooling effect .

❤Nano Thermal Pad—made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label.

Expand your PS5 or Desktop PC storage. Compatible with PS5, confirmed by Nextorage

Ultra-fast PCIe Gen.4.0x4 realized max read 7900MB/s* max write 6900MB/s* . *Tested in Nextorage PC environment.

Optimized cooling structure. An aluminum heatsink, coated with a highly thermally radioactive black alumite.

Ultimate Heat Conductivity | Non-Electrical Conductive | Non-Corrosive, Non-Curing & Non-Toxic

Density (g/cm3):2.8

Hardness (Shore):35 OO

【Designed for M.2 SSD】-The heat sink is specially designed for M.2 2280mm SSD, which is very suitable for desktop computers/Playstation 5, etc.

【Double-sided cooling】- Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer.

【Easy to Install and Operate】 - With double-sided clip design, 6 adjustable height screws, suitable for M.2 SSD of various heights, stable installation, better protection of your M.2 SSD.

Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.

Maximum heat resistance: 482 ℉ (250℃)，comes off clean，easy peal and no residue.

It's really indispensable when sublimating and the tape can do the job very well.

Ultimate Heat Conductivity | Non-Electrical Conductive | Non-Corrosive, Non-Curing & Non-Toxic

Density (g/cm3):2.8

Hardness (Shore):35 OO

All-White edition of DeepCool Classsic AK500 CPU air cooler, AK500 WH white CPU air cooler carries neither RGB nor ARGB lighting, ideal choice to build “White Castle” style PC with the sleek design of minimalism

DeepCool AK500 WH white CPU air cooler features five pieces 6mm heatpipes with raised copper coldplate to maximize heat dissipation to overall 240w TDP for strong gaming performance. Meanwhile, a thermal paste is contained in the package, please apply it on after removing the protective film of coldplate

To handle the conflict between cooling capacity and RAM compatibility, DeepCool AK500 WH white CPU air cooler provides the solution in balance point, which features 90mm thickness all-white giant single-tower with stronger heat dissipation than standard single-tower CPU cooler, meanwhile, the angled offset heatpipe design gives 100% RAM clearance for right side taller RAM sticks and 45mm clearance for left side RAM

[PS5 NVMe Heatsink] – The patented cooler is exclusively designed for PlayStation 5 internal NVMe SSD. It features a heat pipe and a huge solid aluminum heatsink. The high performance comes from the numerous cooling fins and the delicate utilization of air circulation sucked by PS5 main cooling fan. The streamlined profile is a snag fit with the middle frame of PS5 chassis. The heatsink is the ultimate cooling solution to the heat management of extreme Gen4 gaming SSD

[Heat Pipe and Thermal Pads] – A 5mm copper heatpipe seamlessly embedded in the lower aluminum deck. The passive design with no cooling fan is aiming for being totally silent. The heat produced by the SSD will be absorbed by the heat pipe and effectively conducted to the extensive aluminum fins. Two pieces pre-divided thermal pads included for excellent heat connection. 1.0mm and 1.5mm thickness option adapts to any NVMe memory

[Improved Mounting Post] – It seems the leading maker Sony does not belong to M.2 SSD industry. We don’t think that the stock screws mount M.2 SSD appropriately in the memory compartment. ElecGear did it better with a re-designed fixing structure for your gaming SSD. The modified guide post, standard M.2 screw and even a PVC washer to adjust the height of SSD are included in the box