Best Sabrent in 2026

Connect a 2.5in SATA hard drive to your computer using a portable cable with UASP Support. (USB 3.1 TO SSD" or "SSD TO USB 3.1" means the same thing and has the same functionality. This is an adapter that enables customers to connect their hard drives to a PC via USB 3.1 and it can be viewed as connecting the USB TO THE SSD or THE SSD to the USB. It is the same exact function).

USB 3.1 high-speed supports up to 10Gbps data rate

Hot-swappable, Tool-free HDD Installation, plug and play, no drivers needed.

Connect a 2.5" SATA I/II/III hard drive or SSD to your computer with UASP Support

Speeds up to 5Gbps with 3.0

Hot-swappable, plug and play, no drivers needed.

High performance USB 3.0 extension cable extends the connection between a computer or Windows tablet and both USB 3.0 and USB 2.0 peripherals including hard drives, USB hubs, mice, keyboards, flash drives, printers, and more

Upgrade to SuperSpeed USB 3.0 and future-proof your data transfer rate while maintain backwards compatibility with your existing USB 2.0 devices

Enjoy SuperSpeed USB 3.0 data transfer rate at up to 5 Gbps, 10x faster than USB 2.0

High performance USB 3.0 extension cable extends the connection between a computer or Windows tablet and both USB 3.0 and USB 2.0 peripherals including hard drives, USB hubs, mice, keyboards, flash drives, printers, and more

Upgrade to SuperSpeed USB 3.0 and future-proof your data transfer rate while maintain backwards compatibility with your existing USB 2.0 devices

Enjoy SuperSpeed USB 3.0 data transfer rate at up to 5 Gbps, 10x faster than USB 2.0

M.2 PCIe Gen3 x 4 Interface.

PCIe 3.1 Compliant / NVMe 1.3 Compliant.

Power Management Support for APST / ASPM / L1.2.

10-USB 3.0 ports allow data transfer speeds up to 5Gbps.

Sync Card Readers, Phones, Hard Drives and other USB peripherals.

Power switches with Blue LED to indicate power status for each port.

Molex 4 Pin to x2 15 Pin SATA Power Splitter Cable and x2 SATA Cables (Data) included

Screw pack included to mount the drives

Quick and easy installation

Instantly Add Four USB 2.0 Ports to Any Compatible Device.

Easy Setup, Plug-n-Play, Hot Swappable, Hot Pluggable.

Gain Four, Downstream Ports Which Offer High-Speed (480Mbps), Full-Speed (12Mbps), And Low-Speed (1.5Mbps).

Expansion: Instantly add 4 USB 3.0 Ports to Any compatible device. Transform a single USB port into a full work station. The extended 2 ft cable allows for the perfect set up and easy access to out of the way ports.

Convenience: LED Indicators display power status for each port. Individual on/off switches enable you to easily connect and disconnect your devices with the push of a button.

Speed: Supports transfer speeds of up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), & 12Mbps (USB 1.1).

Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.

Suitable for 2.5” SATA/SSD;Supports Standard Notebook 2.5″ SATA and SATA II Hard drives

Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1

NVMe M.2 PCIe Gen4 x4 Interface. Built to the PCIe 4.0 specification / NVMe 1.3 Compliant.

Power Management Support for APST / ASPM / L1.2.

Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.

Convert any 2 2.5" Hardrive into a 3.5" drive bay

Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!!

Quick and easy installation

NVMe M.2 PCIe Gen4 x4 Interface. Built to the PCIe 4.0 specification / NVMe 1.3 Compliant.

Power Management Support for APST / ASPM / L1.2.

Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.

7-USB 3.0 ports allows data transfer speeds up to 5Gbps

Sync Card Readers, Phones, Hard Drives and other USB peripherals

Blue LED to indicate power status for each port

Plug & Play, Hot-Swappable. Tool-free design, easy to install.

Hi-Speed USB 3.0 to SATA interface.

Compatible with 2.5” SATA hard drives. Optimized for SSD, Supports UASP SATA III.

USB 3.2 Type-C port with up to 10Gbps transfer speed.

5 x SATA 6Gbit/s 3.5” hard drive bays.

High-quality aluminum for optimal heat dissipation and structural integrity.

Plug & Play, Hot Swappable. 1.2 Meter / 4 Feet Power Supply Cord.

16 x Super Speed USB 3.0 Ports. Compatible with USB 2.0 & USB 1.1. Blue LED to indicate power status for each port.

Data transfer speeds of up to 5Gbps.

USB 3.2 Gen2 Type-C port supports transfer speeds of up to 10 Gbps. 10 x SATA 6 Gbit/s 3.5” hard drive tray-less bays.

High-quality aluminum for optimal heat dissipation and structural integrity. Hot-Swappable with 10 independent ON/OFF power switches.

Locking key to prevent accidental bay opening, fully tray-less design. Built-in Kensington security slot.

Supports Standard Desktop 2.5"/3.5" SATA Hard Drives or SSD

Supports hard drives up to 20+TB

Plug and play, no drivers needed.

Instantly Add Four USB 3.0 Ports to Any Compatible Device

Individual Power Switches with LED Indicators

Supports Transfer Speeds up to  5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1)

SuperSpeed USB 3.0 for maximum performance. Backward compatible with USB 2.0 hosts.

Powers via USB port, no additional power supply needed.

Plug-n-Play, no installation required.

Instantly Add Seven USB 3.0 Ports + 2 Charging Ports to Any Compatible Device

Supports Transfer Speeds up to 5Gbps (USB 3.0), 480Mbps (USB 2.0), 12Mbps (USB 1.1)

Features Over-Current Protection Safeguards When Equipment is Connected From Over-Voltages

NVMe M.2 PCIe Gen4 x4 Interface. PCIe 4.0 Compliant / NVMe 1.3 Compliant.

Power Management Support for APST / ASPM / L1.2.

Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.

DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install.

REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the SABRENT Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation.

UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink.

Supports all 2.5 and 3.5-inch SATA drives

Connects via SuperSpeed USB 3.0 (up to 10x as fast as USB 2.0)

UASP (USB Attached SCSI Protocol) support for even faster performance. UASP requires UASP capable host system

Don’t settle for PCIe 3.0! Have a new motherboard that can handle PCIe 4.0? Supercharge your experience with a Gen4 NVMe SSD. The future is only getting faster, and the Rocket 4 Plus tests even the boundaries of PCIe 4.0.

Get tried and true hardware: Our Rocket 4 Plus comes with TLC and DRAM to make sure you never suffer any performance pitfalls. We’re always working to keep the firmware and flash at the cutting edge. Be fast, day or night, and leave the competition in the dust.

Ready for computers and consoles: The Rocket 4 Plus utilizes an eight-channel controller to reach speeds of up to 7,100 MB/s, more than enough to meet any storage challenge. A lot of speed goes an even longer way.

Mount easily and securely your Mac mini.

Allows full access to power button, output jacks, and cables.

Silver powder coating helps protect your Mac Mini from scratches or damage.

Don’t settle for PCIe 3.0! Have a new motherboard that can handle PCIe 4.0? Supercharge your experience with a Gen4 NVMe SSD. The future is only getting faster, and the Rocket 4 Plus tests even the boundaries of PCIe 4.0.

Get tried and true hardware: Our Rocket 4 Plus comes with TLC and DRAM to make sure you never suffer any performance pitfalls. We’re always working to keep the firmware and flash at the cutting edge. Be fast, day or night, and leave the competition in the dust.

Ready for computers and consoles: The Rocket 4 Plus utilizes an eight-channel controller to reach speeds of up to 7,100 MB/s, more than enough to meet any storage challenge. A lot of speed goes an even longer way.

NVMe M.2 PCIe Gen4 x4 Interface. PCIe 4.0 Compliant / NVMe 1.3 Compliant.

Power Management Support for APST / ASPM / L1.2.

Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.

Turn your internal 2.5” or 3.5” SATA disk into a fast and reliable USB drive.

Aluminum shell construction with ABS disk-tray for additional shock absorption. Tool-free design: Disassemble by pushing a button and swap disks with ease.

Transfer speed of up to 625 MB/s with USB 3.0 (depending on the hard disk used). LED for power and activity status.