Best Terramaster Hard Drive Enclosures in 2025

Fits in any form factor desktop computer case with at least one standard 3.5" internal drive bay

Adapts 3.5" internal drive bay for use with up to two 2.5" SSDs

Supports 7mm and 9.5mm height standard SSDs

【SuperSpeed USB 3.1 with UASP】-- 2.5 USB C hdd enclosure is compatible with SATA III transmission protocol which is 70% faster than traditional USB3.0. The maximum data transfer rate of the USB 3.0 interface is 5Gbps;The blue LED indicator to let you know the working status of this hard disk enclosure easily

【Plug & Play】-- Tool free installation design makes you don't need any tools, With the detachable two cable USB-C to C and USB-A to C (50cm), it is quite flexible to connect more devices and support hot-swapping

【Transparent to Find】-- ORICO 2.5 hard drive enclosure is made by high quality PC transparent board which allows you to see the inside drive without opening it,monitoring all-round view when drive working

Molex 4 Pin to x2 15 Pin SATA Power Splitter Cable and x2 SATA Cables (Data) included

Screw pack included to mount the drives

Quick and easy installation

Super Fast 6Gbps UASP: SATA interface supports max transfer speeds up to 6Gbps and UASP accelerated transmission protocol. 70% Faster than traditional USB 3.0. Backward compatible with USB 2.0 and USB 1.1 ports.

2nd Gen USB 3.1 Port: Standard 2nd Gen USB C 3.1 with (7+15) Pin SATA III provides ultra-fast data transfer speeds of up to 6Gbps max. (Only USB-A to UAB-C Cable included)

Travel-Friendly External Storage: URGREEN hard drive enclosure connects your 2.5-inch SSD&HDD to a PC, laptop, game console, or router for easy data transfer. Get protection from scratches and data storage for SATA hard drives.

Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.

Suitable for 2.5” SATA/SSD;Supports Standard Notebook 2.5″ SATA and SATA II Hard drives

Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1

【Applicable SSD 】- This M.2 SSD Enclosure only for NVMe PCIE SATA M-Key / B+M connectors M.2 SSD. Applicable to sizes 2242 / 2260 / 2280 solid state drivers. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Note: NVMe and SATA SSD are not included.

【Type C interface】- Both side can be inserted; M.2 NVME recommends USB-C Gen 2 10Gbps or Thunderbolt 3 for extreme speed performance. One HD movie transfer only takes 2 seconds; Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps.

【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry. Package includes 2 x Thermal Pad，both USB Type-C and USB 3.0 (Type-A) cables, and a Screw Driver.

Supports all 2.5 and 3.5-inch SATA drives

Connects via SuperSpeed USB 3.0 (up to 10x as fast as USB 2.0)

UASP (USB Attached SCSI Protocol) support for even faster performance. UASP requires UASP capable host system

Convert 2.5 SATA SSD to a portable USB C HDD enclosure, easily connect to PC, laptop for data transfer. USB 3.1 GEN 1 Superspeed Max 5GBPS, support UASP. NOTE: The actual transmission speed is affected by different working environments.

USB Type-C 2.5 hard drive enclosure, fits for 7.5mm/9mm SATA drive and capacity up to 2TBs.

Easy installation, plug and play, USB C interface for easy use without worry about plugging in wrong side. Dual LED working lights, convenient to view working status.

One-Key Switch

Tool-free user friendly design

IP54 water & dust resistance

WORK WITH- This tray can be used all DELL PowerEdge servers that use 2.5 inch SAS/SATA hotswap drives, compatible part number P/N: 08FKXC/ G176J / 0G176J / G281D / 0G281D / WX387

COMPATIBLE MODELS- This tray is compatible with DELL PowerEdge: 14th Gen T440 T640 13th Gen R330 R430 T430 R630 T630 R730 R730XD R830 R930 XC630 XC730 XC730xd. 12th Gen R320 R420 T420 T620 R620 R720 R720XD R820 R920. 11th Gen R310 R410 R415 R510 R515 R610 M610 T710 R710 M710 R715 R810 R815 R910 M910

EASY TO INSTALL- This hard drive tray is with SAS/ SATA disk port, support hot-plug, easy to install

External Hard Drive Enclosure: This 3.5" hard drive enclosure easily connects your 3.5 /2.5 inch hard drive to a PC, laptop, and other devices for massive data transfers and up to 20TB portable storage. Hard drive enclosure protects a hard disk from scratches and maximizes the use of 3.5"/2.5" HDD/SSD for comprehensive protection of valuable data.

5Gbps High Transfer Speeds: Get 5Gbps transfers with the HDD enclosure. Supported by UASP accelerated transmission protocol, it gets speeds 70% faster than traditional standalone USB 3.0 readers. Backward compatible with USB2.0 and USB1.1 ports.

Interlligent Chip & Better Protection: Built-in with interlligent chip for better performance and high-quality ABS to hold hard drives firmly. Soft rubber strips provide anti-shock protection. Pre-set heat emission holes allow for excellent heat dissipation. Auto-Sleep mode ensures an extended lifespan for your hard drives.

6Gbps High-Speed SSD Enclosure: UGREEN hard drive reader supports 6Gbps max transfer speed and UASP accelerated transmission protocol, 70% Faster than traditional USB 3.0. The USB-C port is standard USB 3.1 Gen 2 which supports 10Gbps and (7+15)Pin SATA III supports max 6Gbps. (USB-C to USB-C Cable included)

Advanced Built-in Chipset: Built-in with ASM235CM chipset and premium aluminum alloy, makes the hard drive enclosure working with excellent heat dissipation, no cooling fan is needed for your high-speed working.

USB C Hard Drive Enclosure: UGREEN hard drive enclosure can easily connect a 2.5" SATA SSD or HDD to your computer to expand storage, upgrade the system, back up files, retrieve and recover data, and transfer data. This external hard drive enclosure protects the hard drive from outside scratches and makes the hard drive portable for data storage.

USB C 2.5" External Hard Drive Enclosure: UGREEN 2.5" Hard Drive Enclosure can easily connect a 2.5" SATA SSD or HDD to your computer to expand storage, upgrade the system, back up files, retrieve and recover data, and transfer data. It protects the external hard drive from outside scratches and makes the hard drive portable for data storage.

6Gbps Fast Speed with UASP: UGREEN USB C Hard Drive Enclosure supports 6Gbps max transfer speed and UASP accelerated transmission protocol, 70% Faster than traditional USB 3.0. The USB-C port is standard USB 3.1 Gen 2 which supports 10Gbps and (7+15)Pin SATA III supports max 6Gbps. 【Only USB-A to UAB-C Cable included】

Easy Installation: Plug and play with tool-free installation, no driver is needed for this enclosure case. Supports Windows/Mac OS/Linux systems, game consoles like Sony PS4/PS3/Xbox One, Smart TV, Router, etc. No request for extra power supply.

Connectors: laptop end: SATA, hard drive end: SATA

Fit for: SATA 2.5"" hard drive, SSD.( 12.7mm on thickness)

Plug and play, supports hot swap

CONVENIENCE: 100% Tool-Free, quickly install and remove SSDs without any tools.

DESIGN: Ultra-slim Aluminum case with ABS frame. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling.

COMPATIBILITY: M.2 form factor compatible with both SATA and NVME in sizes: 2230/2242/2260/2280.

EZ-Lock mechanism for tool-less drive installation

Fits 2 x 2.5” SSD/HDD into a single internal 3.5” drive bay

Compatible with SSD or hard drives with 9.5mm height

Converts your 2.5” SATA HDD or SSD to a 3.5” SATA hard drive, for 3.5” SATA drive bay usage.

Support SATA 6Gbps or SAS 3.0 12Gbps (Single channel)

Accepts 2.5" HDD/SDD (7mm-9.5mm in height)

Support Standard SATA interface and specification

USB 3.0 for Bus powered and fast data transfer

Hot-Swappable: Plug & Play

【2.5'' to 3.5'' Drive Adapter】- ORICO 2.5 to 3.5 ssd adapter can easily convert 2.5 inch SATA drives to 3.5 inch size, which suitable for All 7 / 9.5 / 12.5mm 2.5 inch SATA I II III hard drives and solid state drives.

【Convenient Use】 - The ssd caddy itself has a SATA III interface, which does not require any cables and drivers; Supports hot swapping, plug and play. Compatible with Windows, Mac OS and Linux.

【6Gbps SuperSpeed】 - Adopting SATA 3.0 protocol, the maximum transmission rate of this ssd mounting bracket is up to 6Gbps, which enables high-speed transfer of HD movies and data. Backward compatible with SATA I/II.

Wide Compatibility: Computer hard drive enclosures support all 3.5 inch SATA I/II/III external hard disk up to 16TB. Compatible with Windows 2000/XP/ VISTA/ Windows 7/ 8 /10/ Linux/ Mac 9.0 or above.

Hard Drive Caddy with super speed: The 3.5” HDD caddy packed with USB 3.0 cable supports super speed data transfer rates at 6Gbps, UASP supported.(If there is no USB 3.0 port in the front of the desktop computer, it is recommended to connect the 3.5" hard drive enclosure to the rear USB 3.0 port to achieve the best transmission speed.)

Multipurpose Plug and Play HDD SSD Dock: It is a reliable portable hard drive case for work from home or at the office, also an ideal HDD dock to expand extra external storage for smart TV, PS4 and PS4 Pro, Xbox one, Xbox one x , etc.

Supports Standard Notebook 2.5″ SATA Hard Drives and SSD Drives.

Ultra Light Aluminum Case provides heat dissipation.

LED light indicates Power and Activity status.

Quick and Easy installation

Compatible with all types of 3. 5-Inch hard drives

For use in 5. 25-Inch internal Drive bay

【Practical Hard Drive Enclosure】iDsonix 2.5 inch external hard drive enclosure is designed for 7mm 9.5mm SATA SSD & HDD. Compatible with Western Digital, Toshiba, Samsung and most mobile devices such as TV, PS4/5, Xbox, PC, laptop ect.

【Super Fast 5Gbps & UASP Protocol】This 2.5 External HDD SDD Enclosure interface supports up to 5Gbps transfer rates and UASP accelerated transmission protocol, which will be 30% faster than traditional USB 3.0.(Both your devices need to support UASP ) Backward compatible with USB 2.0 or 1.1 ports.

【All-round Protection & Security】iDsonix 2.5" hard drive enclosure is made of high-quality ABS plastic and built in a High-performance chip, which can provide over-current protection, over-voltage protection and overheating protection to ensure safety for your drivers and valuable data. The attached EVA foam pad can also protect your hard disks from shaking and crashing problems.

【Supported】- Support most 3.5 inch SATA I, II, III HDD or SSD up to 16TB(Max); Compatible with Windows 10/8/7/Vista/XP or Mac OS 9.1 and above, Macintosh, Linux and Unix desktops or laptops; UASP support.

【Features】- Tool-free installation; plug and play; No reboot and no driver required; The USB 3.0 port offers data transfer rates of up to 5 Gbps. Rugged ABS material is heat-resistant and drop-proof.

【Technical】- USB 3.0 and SATA III transfer port support 3.5 inch hard drives up to an enormous capacity of 16 terabytes. 12 volt, 2 amp EU power supply.

【Chipset RTL9210B M.2 NVMe SATA Enclosure】M.2 Enclosure Up to 10 Gbps High speed M.2 NVME to USB 3.1 Gen 2, 6Gbps speed M.2 SATA to USB 3.1 Gen 1, perfect solution for data transfer and data backup, the actual transfer speed depends on the speed of your SSD, USB Port type, your computer performance, and NVMe /SATA media used etc.One HD movie transfer only takes 2-5 seconds.

【TOOL-FREE DESIGN】Tool-free NVMe SATA NGFF enclosure allows quick and easy installation of your M.2 NMVe SSDs or M.2 SATA SSDs. The first time you use m.2 solid state drive SSD, you need to format the disk. It will Safe for your Memory data.

【COMPATIBILITY】Compatible with M.2 NVMe/SATA PCIe M key,PCIe B&M key SSD. 【Note: NVMe and SATA SSD are not included.】 NOT Compatible with M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs. Applicable to sizes 2242 / 2260 / 2280 solid state drivers.

HDD External Hard Drive Docking Station, Max Support 8TB

SATAIII/II/I External Hard Drive Enclosure, Compatible with Windows, Mac Os, Linux

USB 3.0 Hard Drive Disk External Enclosure, 5Gpbs SuperSpeed Data Transfer

LED available,Built-In Eject / Lock Mechanism,Comes with matched Faceplate/Bezel

The hard drive attaches to the caddy from the side using long screws

Works in E-Modular Bay of Dell Latitude E6420, E6520,E6320,E6430,E6530,E6330

Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk

Supports computer cases with an available 5.25 inch drive bay (screw-on type);allow to Mount 1x 3.5 - inch Drive and 1x 2.5 - inch Drive

Separating rubber washer and screws provide excellent heat dispersion and shock absorption

USB C 2.5 External SSD Enclosure supports a 2.5" SATA SSD or HDD drive; portable external hard drive in a sturdy aluminum housing protects the SSD drive and assists with heat dissipation

Portable USB 3.1 SSD enclosure offers convenient and fast data back-up for temporary or long-term use; Diagnose internal SATA SSD drives for replacement or repair with this SATA HDD adapter

Tool free SATA hard drive enclosure offers a data transfer rate up to 10Gbps with a compatible computer; 10Gbps data transfer rate is 2x faster than USB 3.0; Thunderbolt 3 computer compatible with the included USB C cable; Supports the maximum SATA III 6Gbps data transfer rate

Use your 2.5" / 3.5" SATA I / II / III as an additional external hard drive.This USB3.0 to SATA adapter supports up to 18TB hard drive.

High speed USB 3.0 specification and backward compatible with USB 2.0/1.1.

Hot swappable, plug and play. No drivers needed for you to enjoy its outstanding performance.