Best Nortrac in 2026

Large 2.5 gallon reservoir capacity

Heavy-duty 12 Volt, 2 HP motor delivers 3,000 max. RPM

1.5 GPM flow rate

60in. clearing width clears loads of snow with each pass

40-ft. throwing distance puts snow where you want it

Manual-crank chute rotates 340deg to throw snow where you want it to go

 Chips wood and branches up to 5 1/2in. thick

Large vertically oriented hopper opening requires less pruning

Hopper chute is angled so brush is self-fed into the chipping knife for easy chipping

This Universal Quick Disconnect Coupler set features a new improved design for high flow performance and maximum service life.

3/8" Body, 3/8" NPT Thread, These flat face couplers interchange with with all 3/8" Body ISO 16028 Flat Face couplers

Heavy Duty Design with 5076 PSI Rating - 12.15 GPM Max Flow Rate

1.→Multiple Choices:There Have Five Hydraulic Quick Coupling Supply Which Include The 1/2",1/4",3/4",3/4"SAE,3/8" ISO16028 Hydraulic Quick Connect Couplers.Please Select On the Size Name Option

2.→New Valve Design and structure. It Can resistance damage from high flow and the pressure of impulse that providing advanced performance. Steel construction, zinc plated with yellow chromate finish. hardened nipples and sleeves and solid barstock construction for maximum resistance to damage from hydraulic and mechanical shock. This Anti –Blowout Nitrile/PTFE bonded seal is designed to prevent blow-out or damage during severe service conditions

3.→Sleeve locking mechanism:Sleeve locking mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection when the coupling is dragged along the ground. Sleeve mechanism is designed to prevent dirt from entering the internal mechanism and thus causing faulty operation when connecting or disconnecting. The sleeve covers the retaining ring and also incorporates a dust seal in the spring area.

The Breather Cap from Buyers Products acts as a ventilator to provide a free flow of clean air into your reservoir.

It features oil-resistant filter elements that keep out dirt and dust particles as small as 40 microns.

Provides free flow of clean air into hydraulic fluid, oil, chemical, and coolant tanks or reservoirs.

Made in Taiwan

Most Commonly Ssed Size:4, 6, 8, 10, 12, and 16.It can meet most of your needs.

Application：Our AKM hydraulic jic plug and cap kit are made from 45# structural steel widely used in agriculture, contruction,mining and fuel industries for high pressure fuel delivery and fluid power applications,seal hoses, tubes, and pipes.

Equipped with high-quality plastic outer box, with accessories parameter table.

64 PCS hydraulic JIC cap & plug fittings kit,AN assortment hydraulic fitting set,also known as "AN" 37 degree flare JIC caps and plugs. The JIC 37° flare thread cap & plug can be easily installation to seal hydraulic hoses, tubes, and pipes

A must have for hydraulic lines: hydraulic JIC plug and cap cap kit works great for hydraulic repairs.The JIC cap and plug are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems

The hydraulic adapter fittings set are made by carbon steel to withstand high pressure applications and high heat fuel delivery and fluid power applications. The jic cap and plug kit fittings have precision threading to make sure install smoothly and resist corrosion

1" ISO Body Size, 1" NPT Thread, Poppet Valve

Female Coupler Dimensions: 2.05" OD, 3.9" Long; Male Coupler Dimensions: 1.23" OD, 2.58" Long

Harden Steel with 3600 PSI Rating

Constructed of steel for durability

Large, oil-resistant filter

Blocks dust and dirt particles as small as 40 microns, preventing them from entering the tank/reservoir

64 PCS JIC 37° flare thread hydraulic caps and plugs kit,also known as "AN" 37 degree flare JIC caps and plugs.The JIC 37° flare thread cap & plug can be easily installation

The hydraulic jic plug and cap kit widely used in agriculture, contruction,mining and fuel industries for high pressure fuel delivery and fluid power applications,seal hoses, tubes, and pipes

A must have for hydraulic lines: JIC hydraulic cap and plug kit works great for hydraulic repairs.The JIC caps and plugs are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems

Nickel plated exterior surface.

Threaded locking. G 1/2 in BSP thread size. (Note: A BSP 1/2-inch male thread does not fit into 1/2-inch NPT hole.)

BSP 1/2 in threaded mounting flange and 3 pcs M4x10 screws are included.

Chrome plated outer surface.

It is closed by turning a quarter turn with bayonet type locking.

Metal cap diameter: 3.09 in (78.5 mm)

Chrome plated exterior surface.

Threaded locking. G 1 in BSP thread size. (Note: A BSP 1-inch male thread does not fit into 1-inch NPT hole.)

BSP 1 in threaded mounting flange and 3 pcs M5x10 screws are included.

Nickel plated exterior surface.

Threaded locking. G 1/2 in BSP thread size. (Note: A BSP 1/2-inch male thread does not fit into 1/2-inch NPT hole.)

Metal cap diameter: 1.79 in (45.5 mm)

Features a tearproof, long-life inner gasket compared to ordinary cork-gasketed hydraulic caps.

Chrome plated exterior surface.

It is closed by turning a quarter turn with bayonet type locking. Mounting flange and 3 pcs M5x10 screws are included.

Package Includes: These hydraulic fittings are includes 128pcs JIC and ORFS hydraulic cap and plug, fittings in the 6 most commonly needed dash sizes: 64pcs. JIC kit - #4 (7/16-20), #6 (9/16-18), #8 (3/4-16), #10 (7/8-14), #12 (1 1/16-12), #16 (1 5/16-12) and 64pcs ORFS kit - #4 (9/16-18), #6 (11/16-16), #8 (13/16-16), #10 (1-14), #12 (1 3/16-12), #16 (1 7/16-12).

Precision Engineered Threading: Thanks to our precise CNC machine that can provide the ultimate precision for our JIC and ORFS caps and plugs set, ensuring easy sealing and repeated installation and removal. With high strength galvanized from 45# structural steel material can withstand high-pressure applications and high heat fuel delivery and fluid power applications, providing a longer and more durable lifespan.

Save Time & Energy: Not only these JIC and ORFS caps and plugs set can effectively seal and quickly keep hydraulics lines from fluid leaking when removing fluids from hydraulic application/machinery work/ truck/chemical processing systems, but also used commonly in fluid power and fuel delivery applications. The flat face connection design makes it Reusable and easily maintainable, used to cap lines and hoses when working on hydraulis, to keep dirt out, and to keep fluid from leaking out.

Chrome plated exterior surface.

Threaded locking. G 1 in BSP thread size. (Note: A BSP 1-inch male thread does not fit into 1-inch NPT hole.)

Metal cap diameter: 3.09 in (78.5 mm)

【 Prevent Oil Splashes】 This twist in oil breather cap has an internal baffle, which can prevent oil splashes, in addition, it can also provide excellent ventilation.

【Good Replacement】Our oil breather cap is a good replacement for accessories on many models of cars

【Adaptation】This valve cover breather is twist in, designed for all valve covers with twist lock type oil filler holes

Recmod Hydraulic Oil Cap For Bobcat

Vented Cap For Excavator Skid Steer Loader Toolcat Work Machines

Fit Excavator Model :321 323 324 325 328 329 331 334 335 337 341 425 428 430 435 E14 E16, E17 E19 E20 E25 E26 E32 E34 E35 E37 E42 E45 E50 E55 E85

Made of AISI 430 (18/0) grade ferritic polished stainless steel, the cap housing is both durable and attractive.

It is closed by turning a quarter turn with bayonet type locking. Mounting flange and 3 pcs M5x10 screws are included.

Metal cap diameter: 3.09 in (78.5 mm)

Wide Compatibility: Our valve cover oil breather cap is versatile, fitting various models including Ford Windsor V8, Ford Cleveland V8, Ford 6 cylinder 250, and SBC BBC SBF 327 350 302 454 502, delivering easy replacement for different engines.

Perfect Dimensions: With a 3-inch diameter and 1-inch neck, our chrome round valve cover push-in breather cap can fit valve covers with a 1-1/4-inch hole. It has perfect dimensions for easy installation and a precise fit.

High-Quality Material: Made of chrome alloy, our valve cover oil breather cap is durable and sturdy, with high strength to ensure stable performance. The quality construction ensures that it will last for a long time.