Best Oupuntoe in 2026

Made from stainless steel,scratch resistance

Suitable for RMR,VISM,MROS,VORTEX VENOM and other mini red dot sight.

Optic mount suitable for PT111 G2 G2c G2s and for Original G3,for TX22.

Rear ring is pushed forward 1" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Use this cantilever mount for mounting 30 mm telescopic sights.

The 3-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.

Use this cantilever mount for mounting 1-inch telescopic sights

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.26 inches (32 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 26 Inches (32. 0 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torn-style socket cap screws for secure mounting.

Use this cantilever mount for mounting 30 mm telescopic sights.

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

Detachable aluminum rifle scope mount rings

.987" high

1 inch tube diameter

UTG Super slim Picatinny riser mount, 0.83" saddle height, 3 slots, 1.57" in length

A fresh new look precision CNC Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Distinctive scalloped Picatinny slots for snag free accessory mounting

Product 1: Popular and premium traditional hunting scope at an affordable price; High-grade optical glass provides excellent brightness and clarity with lasting durability

Product 1: Quality, precision-ground lenses are larger than those of comparable scopes, for better light transmission; Index-matched, Hi-Lume multicoating aids in low-light performance and glare elimination, increasing your success rate

Product 1: Durable, integrated-eyepiece design has no-slip grip for easy adjustment in the field; Positive steel-on-steel adjustments assure repeated accuracy

45° ANGLED MOUNT; Mounts to standard picatinny / 1913 / weaver rails

Angled mount provides FAST TRANSITION TO BACKUP OPTIC

IDEAL FOR MOUNTING LIGHTS / LASERS without blocking optical sight

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.

When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.

This Vortex Tactical Ring positions the center of the riflescope tube at a height of 1.18 inches (30.0 mm) from the base.

For receivers with Mil-Spec 1913 Picatinny rails

Rear ring pushed 1" forward for better eye relief

6061 T6 extruded aluminum + anodized black finish

Machined from domestic 6061 T6 extruded Aluminum, Matte Black finish only

Center spread - 3.825", overall length of mount - 6.670", Mauser 98 scope mount does not fit the 3000 L

Picatinny cross slots run the full length of the rail; center channel reduces overall mass of mount

Model #177095 - Mark scope mount in size 34mm in Matte finish

Use this cantilever mount for mounting 30mm tubes.

These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base.

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting

The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base.

Made with pride in the USA

Precise, rugged, and easy to use

Developed through years of trials and testing

For heavy duty or precision applications

Model #120181 - Mark 4 Rings 34mm High (Aluminum) with a Matte finish

Compatable with Leupold PRW bases or any other Picatinny-style mount rails

Machined from solid steel

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Compatible with most 9mm - 11mm, flat or rounded, airgun/shotgun dovetail rails

Recoil resistant Stop pin aids in additional zero retention against bidirectional recoil force typical of spring Operated airguns

Precision Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

The feature-packed Bushnell AR Optics 1-4x24 gives you the features you need to outfit your AR with a capable and fast-deploying optic. Available in the second focal plane (SFP) Drop Zone-223 with holds out to 600 yards

Exposed turrets allow you to dial for windage and elevation adjustments quickly and accurately, and the Throw Down PCL makes magnification changes almost instant. The IPX7 waterproof rating and fully multi-coated optics make this an outstanding value, and its compact size make it perfect use with offset irons or red dot sight

Fully Multi Coated - Multiple layers of anti-reflective coating on all air-to-glass surfaces deliver bright, high-contrast images

Simplest, most effective way to mount any FastFire sight on a rifle

Allows the FastFire to mount at the optimum height, so the red dot can co-witness with flip-up sights

Fits Weaver or Picatinny-style base

Picatinny rail mount for Ruger 10/22 model rifles

Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics

Installs via included set screws into the Ruger 10/22 factory mounting holes

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Simplify target acquisition – the fast Fire 2 provides a bright-red dot, allowing for faster target acquisition and easy aiming.

Mount with brightness sensor – let the fast Fire 2 Adjust to your environment light levels, so you can keep Slamming targets.

Lightweight fast Fire Red dot sights – with compact design.

The Razor HD 27-60x85 Angled Spotting Scope employs high-end optical technology, precision craftsmanship, and ultra-sleek functionality to make the Razor one of the finest spotting scopes on the market. Eye Relief is from 0.67 to 0.66 inches

Triplet Apochromatic lens combined with high density, extra-low dispersion glass delivers unparalled resolution and color fidelity. XR Plus anti-reflective coatings were applied to the lenses to yield maximum brightness for critical low-light glassing.

A smooth helical focus dials in razor sharp resolution and keeps the scope trim for easy packing. A multi-position eyecup twists up to give you proper eye relief with or without glasses.

<p>[ Professional High Definition Binoculars ]:  Equipped with Fully Multi-coated lenses and 18mm BaK4 dielectric-coated prisms , the professional binocular provides an exceptionally brightness, clarity and sharpness, even in the harshest conditions and most challenging environment.</p>

<p>[ Universal Phone Adapter for Binoculars Photographing ]:  The universal smart phone adapter helps you photograph what you see through the HD binoculars. Share your life, share what you like to your family and friends. A perfect match for beginners and mid-range birding and outdoor enthusiasts.</p>

<p>[ True-to-life Color Binoculars for Bird Watching ]:  GLLYSION Binocular with high-end lens coatings provides excellent high-contrast image with excellent color reproduction, you can make out every single detail for quick and easy identification in any situations encountered in bird watching.</p>