Best Utg Sporting Optics Mounts in 2026

Mounting rings are pushed forward 2" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Use this cantilever mount for mounting 1-inch telescopic sights

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

UTG Super slim Picatinny riser mount, 0.5" saddle height, 3 slots, 1.57" in length

A fresh new look precision CNC Machined from 6061-T6 aircraft grade aluminum and finished in a matte black anodize

Distinctive scalloped Picatinny slots for snag free accessory mounting

45° ANGLED MOUNT; Mounts to standard picatinny / 1913 / weaver rails

Angled mount provides FAST TRANSITION TO BACKUP OPTIC

IDEAL FOR MOUNTING LIGHTS / LASERS without blocking optical sight

Machined from domestic 6061 T6 extruded Aluminum, Matte Black finish only

Center spread - 3.825", overall length of mount - 6.670", Mauser 98 scope mount does not fit the 3000 L

Picatinny cross slots run the full length of the rail; center channel reduces overall mass of mount

Model #177095 - Mark scope mount in size 34mm in Matte finish

Precise, rugged, and easy to use

Developed through years of trials and testing

For heavy duty or precision applications

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Compatible with most 9mm - 11mm, flat or rounded, airgun/shotgun dovetail rails

Recoil resistant Stop pin aids in additional zero retention against bidirectional recoil force typical of spring Operated airguns

Precision Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

Simplest, most effective way to mount any FastFire sight on a rifle

Allows the FastFire to mount at the optimum height, so the red dot can co-witness with flip-up sights

Fits Weaver or Picatinny-style base

Thumbnut 1" SPR Mount Black, Clam

Thumbnut 1" SPR Mount Black, Clam

Thumbnut 1" SPR Mount Black, Clam

Mount for 407C, 507C, 508T Models

0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

Adjustable height design for a customized fit, allows the shooter to find the most suitable and comfortable height of scope. Position the center of the riflescope tube at a height of 32mm(1.26") to 38mm(1.5") from the base, compatible with 1 inch and 30 mm tube optics

Precision CNC machined from 6061 T6 aircraft-grade aluminum alloy and finished with colorful anodizing for a unique look and extra durability, passed rigorous tests for accuracy and stability, and allows your scope to hold zero in any harsh and extreme environment

Double screw structure at the bottom for maximum stability, compatible with Picatinny rails only(not suitable for most Weaver rails), quick and easy installation and removal by hand, the torque values of the upper, middle, and lower bolts are 18 in-lbs/25 in-lbs/30 in-lbs respectively

Does not require proprietary tools for adjustment

Can be adjusted with your finger or a flat blade screwdriver

Lever can be configured to lock to the front or the rear

Compatible with Glock vortex venom viper burris fastfire ade *NOT FIT Counterfeit sights

Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.

30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.

1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes

Mounts to any flat top Picatinny or Weaver rail equipped rifle

High profile in height, 0.7 inches from base of mount to bottom of rings

Double scope ring mount for Picatinny/ Weaver Rail (21mm).

Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.

Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

STRONG DURABLE MOUNT - The Scalarworks LEAP Red Dot Mount for the Trijicon MRO is one of the most rock-solid quick-detach red dot mounts on the market; the re-designed clamp has discreet hardened steel pins and a stopper to indicate when it's sufficiently open to clear a Picatinny rail

7075-T6 ALUMINIUM CONSTRUCTION - LEAP red dot mounts are machined from 7075-T6 Aluminium and use 4140H steel hardware for absolute rigidity that results in a near seamless integration between your rifle and optic

CLICKDRIVE MECHANISM - The ClickDrive mechanism is also intuitive, self-adjusting, and completely recoil proof; thanks to the ClickDrive mechanism and the mount's absolute rigidity, LEAP mounts are guaranteed to hold AND return to zero

Proudly Designed And Made In Usa, Precision Machined From Aircraft Grade Aluminum Alloy With Hard Anodizing With Matte Black Finish

Unique Contoured Bottom Designed To Fits On Ruger 10/22 Pre-Drilled And Tapped Rifle Receiver

4.67 Inch Overall Length With 11 Picatinny Rail Slots For Optimal Placement Of Scope, Dot Sight Or Iron Sight, And Flexible Eye Relief Adjustment

MAXIMIZE PERFORMANCE - Low profile design paired with smoothly rounded snag free edges gives you all the benefits of added modularity without the draw backs of unnecessary bulk and weight.

BUILT TOUGH - Engineered out of T6-6061 aluminum to ensure your most expensive and integral equipment remains safely secured when you need it most.

AMERICAN ENGINEERING - Proudly designed and manufactured in the US of A. Is there really any other way to do it?

✌ Precision Material - Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy & durable.

✌ Convert 11mm Dovetail to 21mm Picatinny Rail - 2.94 inches length at the base, the picatinny rail extends 3.94 inches allowing for more flexible optics placement.

✌ Mount Base - Fit 11mm dovetail mounts, Base mount 3/8" to 7/8" converter adapter. Low profile 0.59" riser rail for scope.

Slim design only takes up one rail slot on standard picatinny rail.

1 x rail charm mount kit

1 x hex key adjustment tool

Picatinny riser mount for use with Picatinny or Weaver base optics

Innovative patent pending adjustable height design allows for optimal placement of your optic based on rifle setup or preferred cheek weld

Riser can be adjusted incrementally via two locking screws from 0.87 of rise up to 1.14 inch of rise, measured from rail surface to rail surface

For mounting 30 mm diameter scope tubes to standard Picatinny rail platforms

Offset design with a full 2 inches of forward extension, giving you maximum flexibility for scope placement and eye relief

High profile in height, giving your optic 1 full inch of rise above your receiver with a see-through channel designed into the scope base allowing for simultaneously use with flip-up iron sights

Designed with significant lightening cuts to massively reduce weight without compromising durability

Radiuses edges and corners to prevent snagging, Scratching, or tearing of other gear and for effortless access to scope wind age and elevation turrets

Single mount utilizes locking torn screws and square-shaped Integral recoil stops for a secure zero hold

Perfect to fix an action camera to your gun and record your hunting, airsoft game, or training exercises

Suitable for Shotgun, Rifle, Pistol, Airsoft, Carbines with standard gun rails, such as AR-15 gun families, M4, M16 etc

Works on all standard Picatinny (MIL-STD-1913) rails; more surface area contact ensures more secure optics

Offers three height options(.75 inch, .83 inch and 1 inch), Lower 1/3 co-witness /Absolute co-witness with iron sight when you install it on your red dot sight.

Easy to adjust height. Can be adjusted incrementally via two locking screws from 0.75 of rise up to 1 inches of rise, measured from rail surface to rail surface.

Riser mount for red dot scope with Picatinny or Weaver rail.

PURPOSE – The MTRS20 with included 3 slot rail is the latest offering in the MT series of clamps for lights with built in attachment points

COMPATIBILITY – fits in the small space of the Mossberg 590 SHOCKWAVE 20 Gauge

EASY INSTALLATION - This mount can be positioned 2 ways, left, or right, and provides a solid "lock up" around the magazine tube that stays in place when you remove the barrel.