Best Westhunter Sporting Optics Rings in 2026

Rear ring is pushed forward 1" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Use this cantilever mount for mounting 1-inch telescopic sights

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

Model #177095 - Mark scope mount in size 34mm in Matte finish

Precise, rugged, and easy to use

Developed through years of trials and testing

For heavy duty or precision applications

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes

Mounts to any flat top Picatinny or Weaver rail equipped rifle

High profile in height, 0.7 inches from base of mount to bottom of rings

1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the rail mount

30 mm diameter rings for mounting standard 30 mm rifle scope tubes

Mount base mechanism comes equipped with custom locking bolts that slot seamlessly into your rail system with zero wiggle - guaranteed to hold zero against the toughest of recoil. Avaialble for either Picatinny or Weaver bases.

The Burris P. E. P. R. mount is perfect for mounting your scope forward on your personal protection rifle.

The Proper Eye Position Ready (P.E.P.R.) mount provides 2" of forward scope positioning room which will allow you to obtain proper eye relief and maintain a proper shooting position.

Provides optimum eye relief and full field of view helping to improve your accuracy

Thumbnut 1" SPR Mount Black, Clam

Thumbnut 1" SPR Mount Black, Clam

Thumbnut 1" SPR Mount Black, Clam

✌ Precision Material - Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy & durable.

✌ Convert 11mm Dovetail to 21mm Picatinny Rail - 2.94 inches length at the base, the picatinny rail extends 3.94 inches allowing for more flexible optics placement.

✌ Mount Base - Fit 11mm dovetail mounts, Base mount 3/8" to 7/8" converter adapter. Low profile 0.59" riser rail for scope.

Adjustable height design for a customized fit, allows the shooter to find the most suitable and comfortable height of scope. Position the center of the riflescope tube at a height of 32mm(1.26") to 38mm(1.5") from the base, compatible with 1 inch and 30 mm tube optics

Precision CNC machined from 6061 T6 aircraft-grade aluminum alloy and finished with colorful anodizing for a unique look and extra durability, passed rigorous tests for accuracy and stability, and allows your scope to hold zero in any harsh and extreme environment

Double screw structure at the bottom for maximum stability, compatible with Picatinny rails only(not suitable for most Weaver rails), quick and easy installation and removal by hand, the torque values of the upper, middle, and lower bolts are 18 in-lbs/25 in-lbs/30 in-lbs respectively

Designed with significant lightening cuts to massively reduce weight without compromising durability

Radiuses edges and corners to prevent snagging, Scratching, or tearing of other gear and for effortless access to scope wind age and elevation turrets

Single mount utilizes locking torn screws and square-shaped Integral recoil stops for a secure zero hold

For mounting 30 mm diameter scope tubes to standard Picatinny rail platforms

Offset design with a full 2 inches of forward extension, giving you maximum flexibility for scope placement and eye relief

High profile in height, giving your optic 1 full inch of rise above your receiver with a see-through channel designed into the scope base allowing for simultaneously use with flip-up iron sights

❖【45 Degree Offset Picatinny Rail Mount】Super Lightweight Offset Side Rails with Great Low Profile Design! Allows the Attachment of Lasers, Flashlights, Red Dot Sights or Other Tactical Offset, the 45° Offset Design Creates More Mounting Versatility Eliminating Interference with Vertical Grips, Perfect for Amateurs and Professionals.

❖【Fits 21mm Picatinny Weaver Rail System】The Offset Rail Base Mounted On Standard 21mm Picatinny or Weaver Style Rail Platform, Ensure Mounting Tactical Accessory Seamlessly. [☛ Note: Our Offset Rails are Real 45 Degrees Angle Instead of 30 Degrees like other products on the market.]

❖【Offset 5 Slots Picatinny Rails】With 5 Slots Picatinny Rail, Allowing You Quickly Add On Any Standard Picatinny or Weaver Accessories, Such As Lasers, Flashlights, Red Dots Sight, Micro Red Dot, Microdot, Backup Sights, Scopes, Optics.

Product 1: Features Ballistic Plex , the most simple, elegant, and effective trajectory-compensating reticle available to hunters Variable power for versatility and improved accuracy at longer distances

Product 1: Provides a generous 9.2 to 12 in. of eye relief

Product 1: Forward mounting design allows mounting in front of the ejection port, for extended eye relief and both-eyes-open shooting; beneficial for fast target acquisition and increased situational awareness

Fits Marlin 336 Rifles. Rail & Ghost Ring Sights Included

XS Sights Rail And Ghost Ring Upgrades Push Your Marlin Rifle To Greater Distances With Increased Accuracy.

Light Weight, Versatile Optic Mount Accepts Scout Scopes, Traditional Scopes, And Red Dot Optics.

0.850-inch / 21.6-mm

REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware; Type 303 stainless steel top cap screws with black oxide finish; Micro-radiused on all machined leading edges to ensure a non-marring design

BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring

Dual ring scope mount for Picatinny rail platforms available for both 1 inch and 30 mm tube diameter rifle scopes

Hollow frame design weighs in at 4.3 ounces - 30% lighter than our previous generation scope mount models

Two inches of forward offset for flexible scope positioning and optimum eye relief

Monstrum Next Level Series Scope Rings offer the same ruggedness and reliability as our previous generation Precision scope rings but with an integrated anti-cant level bubble to check for level alignment of your rifle before each shot

Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant. An anti-cant level bubble corrects for this issue, allowing you to quickly ensure for proper alignment of your rifle.

Scope base has integrated locking bolts that slot seamlessly into rail slots with zero wiggle for maximum gripping surface. Available in both Picatinny and Weaver versions.

Dovetail to Picatinny rail adaptor for firearms equipped with 11mm or 3/8 inch dovetail standard.

Precision machined out of solid structure aircraft aluminum alloy in black matte coating anodizing finish.

Three high strength build-in locking screws of side ensure a solid mount to lock up on rail.

✌【Low Profile Picatinny Riser Mount】- LONSEL 2 Pack Low Profile Picatinny Riser Mounts with 1/2'' of Rise Style, It's Designed to Lift Your Optics Providing A Clear View Over The Front Sight. Perfect for Mounting Various Red Green Dot, Sights, Scope Rings, Optics, Or More Other Accessories.

✌【With 5 Slots Picatinny Rails】- Top 5 Slots Picatinny Rail Design, Allowing You Add On Any Standard Picatinny or Weaver Accessories, Such As Red Dots, Micro Red Dot, Microdot, Backup Sights, Scopes, Optics, Flashlight and Other Accessorie.

✌【Premium Aircraft Aluminum, Solid & Durable】- Precision Machining of Aircraft Grade 6061 Aluminum Alloy + Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Build No Wobble or Rattle. Item Size: 2.56"L x 1.96''W x 0.78''H; Item Weight: 2.71oz/1 pcs.

Precision Machined from Aircraft-grade Aluminum Alloy

Robust and User Friendly Ergonomic Quick Detach Lever Fully Adjustable to Fit on Any Pic Rail

Bidirectional Design to Offer Needed Offset in Diverse Applications

1 Pack Low Profile Picatinny Riser Mounts with 1/2'' of Rise Style, 1 Pack of 1 inch Riser Mount and 1 Pack of 0.83 inch Riser Mount. It's Designed to Lift Your Optics Providing A Clear View Over The Front Sight. Perfect for Mounting Various Red Green Dot, Sights, Scope Rings, Optics, Or More Other Accessories.

Top 3 Slots Picatinny Rail Design, Allowing You Add On Any Standard Picatinny or Weaver Accessories, Such As Red Dots, Micro Red Dot, Microdot, Backup Sights, Scopes, Optics, Flashlight and Other Accessorie.

Precision Machining of Aircraft Grade 6061 Aluminum Alloy + Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Build No Wobble or Rattle.

Durable Material: The Picatinny rail mount is made of aircraft-grade aluminum alloy with a black hard coat anodize finish, sturdy & durable.

Convert Dovetail to Picatinny Rail: The rail adapter converts 11mm dovetail rail to widely used 20mm Picatinny rail for more flexible optics placement.

Suitable Mount Base: Rail adapter fit 11mm dovetail mounts. Base mount 3/8" to 7/8" converter adapter. Low profile 0.59" riser rail for scope.

Precision machined from aircraft-grade aluminum alloy with hard anodized black matte finish

Low profile with see-thru design. 28mm (1.10") distance from rail base to the center of ring.

Heavy duty construction. Overall dimensions: 2" (height) x 1.77" (width) x 0.8" (depth)

SCOPE MOUNTS

【Perfect for All 22mm Picatinny Rails】2 Pack 25.4mm/1" height from base of mount to bottom of ring scope rings fit for all 22mm standard picatinny rails, perfect for 30mm scope tube.

【High Quality Aluminum, Solid & Durable】CNC machined with high persision, resistance to recoil, exceptional at holding zero. Hard anodized surface starch and weather resistant, Anti-scratch.

【Hollowed-Out Design & Built-In Tape Protection】Skeletonized design to reduce weight to159g without compromising toughness. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

✌【Perfect for All 21mm Picatinny Rails】LONSEL 1'' Picatinny Scope Ring Mounts include 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube.

✌【1 Inch Scope Rings】Perfect fit for 1" scope tube. 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.

✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

1 inch scope rings mounts for 11mm picatinny weaver rails

Scope rings mount Dual ring for mounting standard 1 inch diameter tube scopes to Picatinny equipped

High Profile scope rings(item height:1.96/50mm"),center mirror height 1.28 inches