Best Westhunter Sporting Optics Rings in 2026

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes

Mounts to any flat top Picatinny or Weaver rail equipped rifle

High profile in height, 0.7 inches from base of mount to bottom of rings

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the rail mount

30 mm diameter rings for mounting standard 30 mm rifle scope tubes

Mount base mechanism comes equipped with custom locking bolts that slot seamlessly into your rail system with zero wiggle - guaranteed to hold zero against the toughest of recoil. Avaialble for either Picatinny or Weaver bases.

0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

1.20 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

For mounting 30 mm diameter scope tubes to standard Picatinny rail platforms

Offset design with a full 2 inches of forward extension, giving you maximum flexibility for scope placement and eye relief

High profile in height, giving your optic 1 full inch of rise above your receiver with a see-through channel designed into the scope base allowing for simultaneously use with flip-up iron sights

High profile scope rings for the Picatinny mounting platform with a see-through channel to allow for concurrent usage of the front iron sights

Available in 1 inch and in 30 mm diameter versions. Please check the tube diameter of your scope before purchasing.

Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.

High profile scope rings for the Picatinny mounting platform with a see-through channel to allow for concurrent usage of the front iron sights

Available in 1 inch and in 30 mm diameter versions. Please check the tube diameter of your scope before purchasing.

Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.

Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings

Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts

Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing

Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings

Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts

Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing

Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings

Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts

Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing

Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes

Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target

Mounts to any flat top Picatinny rail equipped rifle platform

Monstrum Next Level Series Scope Rings offer the same ruggedness and reliability as our previous generation Precision scope rings but with an integrated anti-cant level bubble to check for level alignment of your rifle before each shot

Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant. An anti-cant level bubble corrects for this issue, allowing you to quickly ensure for proper alignment of your rifle.

Scope base has integrated locking bolts that slot seamlessly into rail slots with zero wiggle for maximum gripping surface. Available in both Picatinny and Weaver versions.

Dual ring scope mount for Picatinny rail platforms available for both 1 inch and 30 mm tube diameter rifle scopes

Hollow frame design weighs in at 4.3 ounces - 30% lighter than our previous generation scope mount models

Two inches of forward offset for flexible scope positioning and optimum eye relief

Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms with integrated level bubble. Comes with both #6 and #8 screws for compatibility with both older and newer Savage Axis models.

Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required

Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics

0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

30 mm diameter rings for mounting standard 30 mm rifle scope tubes

Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts

For piggyback mounting of red dot sights as a secondary sighting system directly to your rifle scope tube

Allows for fast transition between your rifle scope and a 1x power red dot optic for use at closer ranges

Picatinny rail mount accepts red dots with a standard Picatinny base

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

Weaver base is compatible with either Picatinny or Weaver mounting systems

Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles

Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

Picatinny rail mount built specifically for Rimfire Ruger American rifle platforms

Compatible with Short Action Ruger American models only including: 22 LR | 22 WMR | 17 HMR

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

Picatinny rail mount for Ruger 10/22 model rifles

Installs via included set screws into the Ruger 10/22 factory mounting holes

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

Picatinny rail mount for Ruger 10/22 model rifles

Installs via included set screws into the Ruger 10/22 factory mounting holes

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

Dovetail to Picatinny rail adapter with two inches of forward extension for firearms equipped with 11mm or 3/8 inch dovetail standard

Dovetail base measures 3 inches in length while the top rail measures 5.5 inches (14 total picatinny slots). The rail extends an extra 2 inches over the front of the base, allowing for more forward positioning of long eye relief optics.

Compatible with dovetail bases typically found on airguns or certain model .22 rimfire rifles

Picatinny rail mount for Ruger 10/22 model rifles

Installs via included set screws into the Ruger 10/22 factory mounting holes

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

Picatinny rail mount for Ruger 10/22 model rifles

Installs via included set screws into the Ruger 10/22 factory mounting holes

Adjustable 4-12 times magnification rifle scope, for targeting out to 600 yards and beyond

Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms

Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

Dovetail to Picatinny rail adaptor for firearms equipped with 11mm or 3/8 inch dovetail standard

Picatinny rail allows for the mounting of Picatinny or Weaver standard scopes, red dots, and optics

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld