Best Optics Rings in 2026

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.92 inches (23.4 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

Detachable aluminum rifle scope mount rings

.987" high

1 inch tube diameter

Quick and easy way to set up a training course

4 red, 4 yellow and 4 blue 18" diameter plastic rings

Includes convenient storage bag for easy transport

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

Model #120181 - Mark 4 Rings 34mm High (Aluminum) with a Matte finish

Compatable with Leupold PRW bases or any other Picatinny-style mount rails

Machined from solid steel

Model #174081 - PRW Weaver-Style Cross-Slot Rings 1" Medium with a Matte finish

Compatable with Leupold QRW bases or any other Picatinny-style mounting rails.

Includes all mounting screws

Model #49959 - Standard Rings 30mm High with a Matte finish

Designed to match up with Leupold STD 1-piece or 2-piece bases

5 ring heights available

this is a nationwide distributor of firearms and shooting sports accessories

Seekins Precision, Scope Ring, .82" Low, 30mm, 4 Cap Screw, Black Finish

This product is manufactured in United States

Black Aluminum Xtreme Tactical Rings

Size: Medium, 30 mm; Height: 1.10 in; Rings per Set: 2

Fits on any Weaver or Picatinny-style mount

Adjustable height design for a customized fit, allows the shooter to find the most suitable and comfortable height of scope. Position the center of the riflescope tube at a height of 32mm(1.26") to 38mm(1.5") from the base, compatible with 1 inch and 30 mm tube optics

Precision CNC machined from 6061 T6 aircraft-grade aluminum alloy and finished with colorful anodizing for a unique look and extra durability, passed rigorous tests for accuracy and stability, and allows your scope to hold zero in any harsh and extreme environment

Double screw structure at the bottom for maximum stability, compatible with Picatinny rails only(not suitable for most Weaver rails), quick and easy installation and removal by hand, the torque values of the upper, middle, and lower bolts are 18 in-lbs/25 in-lbs/30 in-lbs respectively

The package length is 12.7 centimeters

The package height is 4.064 centimeters

The package width is 8.89 centimeters

4-Screw high profile "Tiger" ring

Machined from aircraft aluminum alloy with heavy duty steel locking plate for maximum strength holding zero

Twist lock design for quick and user friendly easy installation

1" Grand Slam Ring Medium Matte, Clam

1" Grand Slam Ring Medium Matte, Clam

1" Grand Slam Ring Medium Matte, Clam

XTR SIGNATURE RINGS – These rings were designed for the tactical shooter and deliver plenty of holding power with less weight.

IDEAL MOUNTING ACCESSORIES – These mounting rings let you virtually sight your gun without moving the scope adjustments.

SIGHT MOUNT – There is no need for tapered bases or shimming for thousand-yard shooting with these mount rings.

Ring diameter: 1

Height: high

Extended: one extended

Double hex screws

High grade aluminum

Reversible clamp

Sport type: Hunting

1/2-Inch size

1 inch pair of rings

SIG SAUER SCOPE RINGS - Our proprietary steel alloy ALPHA Hunting Scope Rings are machined with an exactness that is both strong yet ductile that allows the rings to form around a riflescope, yet will not damage the scope under proper installation

RUGGED & DURABLE - Made from Stainless Steel, these 30mm ring mounts not only look tough, but are tough; These steel scope rings are epoxy powder coated to prevent oxidation and resist gun oils, cleaning solutions, and outdoor exposure

EASY TO INSTALL - These ringmounts are 4-screw mounted; They are very easy to install and provide a secure hold of scope with the 30mm tube diameter; Torq Specifications for Alpha Hunting Mounts: To Rail (T15-TORX): 25in/lbs; To Scope (T15-TORX): 25in/lbs

Lapping Tool Kit for checking and adjusting for even alignment of your scope ring set

Place the two alignment rods into your mounted scope ring set to check for even alignment. If properly aligned, the tips of the two rods should be perfectly level.

If the alignment is uneven, the single lapping rod can be used to grind down the imperfections until the two rings are in pinpoint alignment.

Set of four scope ring adapters

Fits scope, laser, flashlight, barrel with 1" diameter

Fits scope rings, scope mounts with 30mm inner diameter

Precision machined from aircraft grade aluminum alloy with anodized matte black finish

Precision machined from aircraft grade aluminum alloy with anodized matte black finish

Complete with stop pin for solid rock application. These scope rings fits on 11mm Picatinny weaver rail mounts.

✔High Profile Picatinny/Weaver. Suitable for 11mm rail.

✔International Dimensions：Scope rings are for standard riflescopes 25.4mm（1 inch），30mm（1.1inch） and 34mm（1.34inch） scope tube.（The red sheet plastic can change the tube diameter）.

✔Perfect Immobility：With red anti-skid sheet plastic,Bevel locking,longer screw,and prevent loosen gasket etc. As showed in our photos.

Tube diameter: 30mm

Height: high

Material: aluminum

See photo above for detailed specs

Ships from Central Texas, Very High Quality QD Scope Mounting System

Super Precision Engineered, Riser Mount for Rifles with Picatinny/Weaver Rail

30mm Low 4-Hole Skeleton Scope Rings

30mm Low 4-Hole Skeleton Scope Rings

30mm Low 4-Hole Skeleton Scope Rings

0.89 inches in height; from the center of the rifle scope tube to the bottom plane of the rail mount

Precision 1 inch scope rings; fit for all standard picatinny and weaver rails

Built-In tape protection; built-in tape inside per rings to prevent from marring the scope; also prevent sliding and fixed position accurately.

High Profile Precision Optics Interface (P. O. I) Scope Rings Have a 37mm Center Height to Fit 30mm Tube Optics with up to a 73mm Outer Objective Diameter

Original Snag-free Contoured Profile with Reduced Weight and Size

6061-T6 Aircraft Aluminum and Steel Construction with a Matte Black Finish

Monstrum Predator Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings

Comes with stainless steel Torx mounting hardware for easy precision mounting without stripping of bolts

Predator Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing

BKL 257H DOVETAIL SCOPE RINGS HIGH - Designed for the shooter who needs stability and prefers independent rings; Model 257H is for 1" diameter scope tubes and fits all standard 3/8" and 11mm airgun dovetails; 0.2" taller than Model 257

ONE-PIECE CLAMPING BASE - Strong one-piece clamping base of BKL 257H Rings allows quick and easy mounting of 1-inch scopes, and also guarantees that when it's mounted on your scope rail, your scope is going to be in perfect alignment with the bore

AUTO-CENTERING TECHNOLOGY - Patented Auto-Centering technology solves the problems created by varying mounting rail widths; Clamping Legs move equally as the clamping screws are tightened keeping the scope centered on the rail

Made in USA and machined into the cross-bolt, this ultra durable recoil lug eliminates ring shift in picatinny and weaver cross slots.

The optimum balance of weight savings and retention.

Aircraft Grade Aluminum provide extra strength and durability to handle the toughest terrain and offers lifetime of use.