Best Rifle Sporting Optics Rings in 2026

Use this cantilever mount for mounting 30 mm telescopic sights.

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

Does not require proprietary tools for adjustment

Can be adjusted with your finger or a flat blade screwdriver

Lever can be configured to lock to the front or the rear

1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes

Mounts to any flat top Picatinny or Weaver rail equipped rifle

High profile in height, 0.7 inches from base of mount to bottom of rings

Double scope ring mount for Picatinny/ Weaver Rail (21mm).

Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.

Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

✌ Precision Material - Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy & durable.

✌ Convert 11mm Dovetail to 21mm Picatinny Rail - 2.94 inches length at the base, the picatinny rail extends 3.94 inches allowing for more flexible optics placement.

✌ Mount Base - Fit 11mm dovetail mounts, Base mount 3/8" to 7/8" converter adapter. Low profile 0.59" riser rail for scope.

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

The Burris P. E. P. R. mount is perfect for mounting your scope forward on your personal protection rifle.

The Proper Eye Position Ready (P.E.P.R.) mount provides 2" of forward scope positioning room which will allow you to obtain proper eye relief and maintain a proper shooting position.

Provides optimum eye relief and full field of view helping to improve your accuracy

For mounting 30 mm diameter scope tubes to standard Picatinny rail platforms

Offset design with a full 2 inches of forward extension, giving you maximum flexibility for scope placement and eye relief

High profile in height, giving your optic 1 full inch of rise above your receiver with a see-through channel designed into the scope base allowing for simultaneously use with flip-up iron sights

Adjustable height design for a customized fit, allows the shooter to find the most suitable and comfortable height of scope. Position the center of the riflescope tube at a height of 36mm(1.42") to 42mm(1.65") from the base, compatible with 1 inch and 31 mm tube optics

Precision CNC machined from 6061 T6 aircraft-grade aluminum alloy and finished with colorful anodizing for a unique look and extra durability, passed rigorous tests for accuracy and stability, and allows your scope to hold zero in any harsh and extreme environment

Double screw structure at the bottom for maximum stability, compatible with 11 mm Dovetail rails only, quick and easy installation and removal by hand, the torque values of the upper, middle, and lower bolts are 18 in-lbs/22 in-lbs/31 in-lbs respectively

0.850-inch / 21.6-mm

REFINED DESIGN: Compact and refined design, with low-profile, non-snagging hardware; Type 303 stainless steel top cap screws with black oxide finish; Micro-radiused on all machined leading edges to ensure a non-marring design

BUBBLE LEVEL: Integral anti-cant bubble level in top half of ring

Fits Marlin 336 Rifles. Rail & Ghost Ring Sights Included

XS Sights Rail And Ghost Ring Upgrades Push Your Marlin Rifle To Greater Distances With Increased Accuracy.

Light Weight, Versatile Optic Mount Accepts Scout Scopes, Traditional Scopes, And Red Dot Optics.

Monstrum Next Level Series Scope Rings offer the same ruggedness and reliability as our previous generation Precision scope rings but with an integrated anti-cant level bubble to check for level alignment of your rifle before each shot

Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant. An anti-cant level bubble corrects for this issue, allowing you to quickly ensure for proper alignment of your rifle.

Scope base has integrated locking bolts that slot seamlessly into rail slots with zero wiggle for maximum gripping surface. Available in both Picatinny and Weaver versions.

Dual ring scope mount for Picatinny rail platforms available for both 1 inch and 30 mm tube diameter rifle scopes

Hollow frame design weighs in at 4.3 ounces - 30% lighter than our previous generation scope mount models

Two inches of forward offset for flexible scope positioning and optimum eye relief

Durable Material: The Picatinny rail mount is made of aircraft-grade aluminum alloy with a black hard coat anodize finish, sturdy & durable.

Convert Dovetail to Picatinny Rail: The rail adapter converts 11mm dovetail rail to widely used 20mm Picatinny rail for more flexible optics placement.

Suitable Mount Base: Rail adapter fit 11mm dovetail mounts. Base mount 3/8" to 7/8" converter adapter. Low profile 0.59" riser rail for scope.

Dual ring scope mount for mounting standard 1-inch tube rifle scopes to Picatinny-equipped rifles

A slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one-piece mount

Attaches and detaches easily via an integrated quick-release mechanism, without additional tools or tightening

Manufacturer: Hawke Sport Optics

Warranty: Limited Lifetime, Condition: New

Manufacturer: Hawke Sport Optics

Warranty: Limited Lifetime, Condition: New

Dovetail to Picatinny rail adaptor for firearms equipped with 11mm or 3/8 inch dovetail standard

Picatinny rail allows for the mounting of Picatinny or Weaver standard scopes, red dots, and optics

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld