Best Seekins Precision in 2026

this is a nationwide distributor of firearms and shooting sports accessories

Seekins Precision, Scope Ring, .82" Low, 30mm, 4 Cap Screw, Black Finish

This product is manufactured in United States

2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions

MOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000+ hour battery life

Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 0 Inches (25. 4 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.92 inches (23.4 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

Rear ring is pushed forward 1" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Use this cantilever mount for mounting 1-inch telescopic sights

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.45 inches (36.8 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.26 inches (32 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

Use this cantilever mount for mounting 30 mm telescopic sights.

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 26 Inches (32. 0 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torn-style socket cap screws for secure mounting.

These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.76 inches (19.3 mm) from the base. Will work with Picatinny and Weaver mounts.

Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another.

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 0. 95 inches (24. 13 mm) from the base. Sold two rings per package.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.

When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.

This Vortex Tactical Ring positions the center of the riflescope tube at a height of 1.18 inches (30.0 mm) from the base.

Detachable aluminum rifle scope mount rings

.987" high

1 inch tube diameter

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.

When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.

This Vortex Tactical Ring positions the center of the riflescope tube at a height of 0.97 inches (24.6 mm) from the base.

Steel construction

Will fit Weaver style scope bases

1 inch rings

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.

Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.

Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Quick and easy way to set up a training course

4 red, 4 yellow and 4 blue 18" diameter plastic rings

Includes convenient storage bag for easy transport

Model #120181 - Mark 4 Rings 34mm High (Aluminum) with a Matte finish

Compatable with Leupold PRW bases or any other Picatinny-style mount rails

Machined from solid steel

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.

Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

Illuminated Wildhold Reticle - An illuminated center crosshair allows for easier target acquisition and easier holdovers, ensuring you spend less time finding your target and more time focusing on pulling the trigger

6 Brightness Setting of Illumination 1-6 levels of illumination to ensure your reticle stands out against any target. Dots in between the brightness levels turn the illumination off, saving you time when you want to turn illumination on and off.

Exposed Elevation Turrets Included - MIL, 6. 5 CM BDC, . 308 Win BDC, . 223 Rem. BDC

Thumbnut 1" SPR Mount Black, Clam

Thumbnut 1" SPR Mount Black, Clam

Thumbnut 1" SPR Mount Black, Clam

This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle.

The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle.

This mount positions the center of the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base.

Easy operation: simply open the tool, place the fiber in the proper groove, Lock the tool, and either pull the fiber through to slit, or rotate the tool around the fiber to ring

Versatile use: The slitter has 5 different sized precision grooves to accommodate cables 5 - 10 mm in diameter without damaging the fiber inside

Specially designed: for use on Corning fiber cables: minixtend fast access binder less, HD minixtend, and other similar styles

Adjustable height design for a customized fit, allows the shooter to find the most suitable and comfortable height of scope. Position the center of the riflescope tube at a height of 32mm(1.26") to 38mm(1.5") from the base, compatible with 1 inch and 30 mm tube optics

Precision CNC machined from 6061 T6 aircraft-grade aluminum alloy and finished with colorful anodizing for a unique look and extra durability, passed rigorous tests for accuracy and stability, and allows your scope to hold zero in any harsh and extreme environment

Double screw structure at the bottom for maximum stability, compatible with Picatinny rails only(not suitable for most Weaver rails), quick and easy installation and removal by hand, the torque values of the upper, middle, and lower bolts are 18 in-lbs/25 in-lbs/30 in-lbs respectively