Best Burris Sporting Optics Mounts in 2026

Mounting rings are pushed forward 2" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Use this cantilever mount for mounting 30 mm telescopic sights.

The 3-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.

45° ANGLED MOUNT; Mounts to standard picatinny / 1913 / weaver rails

Angled mount provides FAST TRANSITION TO BACKUP OPTIC

IDEAL FOR MOUNTING LIGHTS / LASERS without blocking optical sight

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

Simplest, most effective way to mount any FastFire sight on a rifle

Allows the FastFire to mount at the optimum height, so the red dot can co-witness with flip-up sights

Fits Weaver or Picatinny-style base

0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

Compatible with Glock vortex venom viper burris fastfire ade *NOT FIT Counterfeit sights

Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.

30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.

Offers three height options(.75 inch, .83 inch and 1 inch), Lower 1/3 co-witness /Absolute co-witness with iron sight when you install it on your red dot sight.

Easy to adjust height. Can be adjusted incrementally via two locking screws from 0.75 of rise up to 1 inches of rise, measured from rail surface to rail surface.

Riser mount for red dot scope with Picatinny or Weaver rail.

High profile scope rings for the Picatinny mounting platform with a see-through channel to allow for concurrent usage of the front iron sights

Available in 1 inch and in 30 mm diameter versions. Please check the tube diameter of your scope before purchasing.

Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.

New! Red Dot Rifle Firearm Sight - Ready When You Are!

Size is: 34mm

Finish: matte black

Allows for full-sized scopes to be properly positioned on ars with Picatinny rail uppers

Compatible Guns: M&P Pistol – All Non-Optics Ready Models, M&P Shield Pistol – All Non-Optics Ready Models, M&P M2.0 Pistol – All Non-Optics Ready Modelsl, M&P M2.0 Shield Pistol – All (not compatible with .380 EZ, CORE, or optics ready models), M&P M2.0 Compact Pistol – All (not compatible with .22 version, CORE, or optics ready models)

Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Vortex Defender, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1250

Material: Billet 7075-T6 aluminum.

Product 1: Features Ballistic Plex , the most simple, elegant, and effective trajectory-compensating reticle available to hunters Variable power for versatility and improved accuracy at longer distances

Product 1: Provides a generous 9.2 to 12 in. of eye relief

Product 1: Forward mounting design allows mounting in front of the ejection port, for extended eye relief and both-eyes-open shooting; beneficial for fast target acquisition and increased situational awareness

Ruger, 57 Optic Adapter Plate (Burris & Vortex), Black Finish, Fits Ruger-57

Black Finish

Comes with mounting plate for RUGER SR9, SR9C, SR40C, SR40, SR45 and also a standard picatinny mount. Does NOT fit SR9E or SR22. Does NOT fit Ruger Security 9 which is a completely different pistol.

Designed for Ade RD3-006, RD3-009, rd3-012, RD3-013, RD3-015, RD3-018, RD3-021 and similar style mini Red dot sight such as Sightmark Mini Shot, JPoint, Shield RMS/RMSc, Sig Romeo ZERO, swampfox sentinel, Vortex Viper, Vortex Venom, and Burris FastFire 1234.

Does NOT fit Trijicon RMR, RMRcc. Attaches firmly to your firearm for sure performance in tactical situation

Fits on any Weaver or Pica tinny-style mount

Ideal for hunting use

Also great for hunting rifles and other guns

The AD-22 Burris Fast Fire Mount was designed as a quick detach solution for the Burris Fast Fire 1,2 and 3 mini red dot optics. Also fits the Doctor mini red dot optics.

It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize.

It features the Patented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems.

Solid steel rings, ideal for hunting

Pos-Align Inserts offer tremendous gripping power and durability and will not damage the scope finish

Reputation for reliable performance in any weather or shooting circumstance

Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Torque Specs: 15 in/lbs

Mounting Hardware: (2) 6-32 Button Head Screws (2) 6-32 Flat Head Screws (1) 6-32 Set Screw

Red Dot Fitment: Vortex Viper Vortex Venom Burris Fast Fire 1, 2, 3, 4 Docter ADE RD3-001 ADE RD3-002 ADE RD3-009 UTG Reflex Micro Dot Crimson Trace CTS-1200 Crimson Trace CTS-1300 Sightmark Mini Shot

TruGlo Optic Adapter Converts Docter Cut Pistol Slides To Accept Trijicon RMR Mount Optics

Fits Popular Dot Sight Models and CNC-Machined for Easy Install

Mounting Hardware Included (Optic Not Included). Detailed Installation Instructions Are Inside Package.

Compatible Guns: TP9SF and TP9SF Elite Tungsten

Compatible Guns: TP9SF and TP9SF Elite Tungsten

Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS, Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1250