Best Dpp Titanium in 2026

Compatible with Glock vortex venom viper burris fastfire ade *NOT FIT Counterfeit sights

Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.

30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.

Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.

The same kind of products on the market basically use 6061 aluminum but we use 7075, because 7075 aluminum is almost twice stronger than 6061 aluminum.

Compatible with Trijicon RMR/SRO and Holosun 407C/507C/508T,Ultra Low Profile and lightweight.*NOT FIT THE FAKE TRIJICON RMR

Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.

Compatible with Smith & Wesson M&P Vortex Venom & Viper, Burris Fastfire, Docter.Ultra Low Profile and lightweight.*NOT FIT THE FAKE SIGHT.

One Piece Design for a Secure Zero Hold,Easy to install

COMPATIBLE WITH Springfield XD, XD MOD.2, XDS, XD(M), Holosun 507K,Shield RMS/RMSC,Romeo Zero. *Does not work with 5.25″ XD(M) competition series and ALL OSP Models.

Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.

Update to 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.no more need shim! Installation hardware and tools included.

For MP Shield Plus Kimber R7 Mako with the RMSc optic cut to mount a Holosun 407K/507K, No need to modify the slide.

Fully support recoil posts design, durable, reliable.

.065″ thick,ultra Low Profile and lightweight, Easy to install.

Compatible with Smith Wesson MP Holosun 407K/507K,Shield RMS,Sig Romeo Zero

Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.

One Piece Design for a Secure Zero Hold,Easy to install

Custom made for standard Glock 17 19 22 23 34 35 40 41 45 MOS Holosun 509T

Precision CNC Machined from 7075T6 aerospace grade Aluminum with Black anodized finish.

0.03" saddle height.Ultra Low Profile and lightweight.

For Sig P226/229/320 vortex venom viper burris fastfire ade *NOT FIT Counterfeit sights

Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish.

Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.

Custom made for Walther PDP 1.0 Mount Holosun 407K/507K/EPS Carry

Precision CNC Machined from 6AL4V aerospace grade Titanium.Ultra Low Profile and lightweight,never rust.

One Piece Design for a Secure Zero Hold,Easy to install.

Mounting rings are pushed forward 2" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Rear ring is pushed forward 1" for better eye relief

Designed for mil-spec upper receivers with 1913 Picatinny rail

6061 T6 extruded aluminum construction

Use this cantilever mount for mounting 30 mm telescopic sights.

The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces

UTG Super slim Picatinny riser mount, 0.5" saddle height, 3 slots, 1.57" in length

A fresh new look precision CNC Machined from 6061-T6 aircraft grade aluminum and finished in a matte black anodize

Distinctive scalloped Picatinny slots for snag free accessory mounting

UTG Super slim Picatinny riser mount, 0.83" saddle height, 3 slots, 1.57" in length

A fresh new look precision CNC Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Distinctive scalloped Picatinny slots for snag free accessory mounting

45° ANGLED MOUNT; Mounts to standard picatinny / 1913 / weaver rails

Angled mount provides FAST TRANSITION TO BACKUP OPTIC

IDEAL FOR MOUNTING LIGHTS / LASERS without blocking optical sight

Machined from domestic 6061 T6 extruded Aluminum, Matte Black finish only

Center spread - 3.825", overall length of mount - 6.670", Mauser 98 scope mount does not fit the 3000 L

Picatinny cross slots run the full length of the rail; center channel reduces overall mass of mount

Vortex Pro 30mm cantilever ring mount provides the correct height and forward placement for proper scope mounting

The cantilever ring mount positions the center of the riflescope tube at a height of 1.435” (36.45mm) from the base.

Made with pride in the USA

Use this cantilever mount for mounting 30mm tubes.

These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement.

The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base.

Model #177095 - Mark scope mount in size 34mm in Matte finish

For receivers with Mil-Spec 1913 Picatinny rails

Rear ring pushed 1" forward for better eye relief

6061 T6 extruded aluminum + anodized black finish

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

Compatible with most 9mm - 11mm, flat or rounded, airgun/shotgun dovetail rails

Recoil resistant Stop pin aids in additional zero retention against bidirectional recoil force typical of spring Operated airguns

Precision Machined from aircraft grade aluminum and finished in a matte black hard coat anodize

Dual ring scope mount for mounting standard 1 inch tube rifle scopes

Mounts to any flat top Picatinny rail equipped rifle

2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position

Simplest, most effective way to mount any FastFire sight on a rifle

Allows the FastFire to mount at the optimum height, so the red dot can co-witness with flip-up sights

Fits Weaver or Picatinny-style base

Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes

Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount

Mounts to any flat top Picatinny rail equipped rifle

This quick-release cantilever mount is designed for mounting telescopic sights with 30mm tubes onto a flattop style rifle.

The offset of this cantilever mount positions the scope in a forward location, providing correct eye relief and head placement when used on your rifle.

This mount positions the center of the riflescope tube at a height of 1.45 inches (37 mm) from the top surface of the Picatinny base.

Mount for 407C, 507C, 508T Models

0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

Provides extra rail room for rear Back Up Iron Sights (BUIS) when using the StrikeFire red dot along with the VMX-3T magnifier.

The cantilever ring will move the StrikeFire forward about one inch.

Provides lower 1/3 co-witness mounting height of 40 mm.