Best Philmore in 2026

For operation up to 32 volts DC or 250 volts AC.

Recommended mounting hole: 0.437" (7/16").

Not designed for push on / push off manual switch operation, but the button pops out at overload and is reset by pushing back in

Kit contains the five (5) most commonly needed tools for television and radio service

Also included is an extender that may be used as an extension handle when a longer reach tool is nee

Supplied with a shirt pocket sized plastic pouch to hold tools

Switch between cable TV, satellite, video games and other home video products with F-type coax connections

No bleeding - No station interference - no picture loss

Zinc die cast inner case offers complete internal protection

Philmore high quality 10pc trimmer tool kit

Used to adjust resistor trimmers and variable capacitors in TVs, radios, CBs, HiFi, etc

Includes the most common square tips, flat screw driver blades and recessed flat blades

White plastic insert easily snaps-in keystone wall plate.

3.5mm stereo connector with female connection on each side.

Gold plated connectors for a superior connection.

Philmore circuit breakers are single pole, thermal circuit breakers that feature a recessed reset button which cannot be manually pulled out to disconnect the circuit.

When an overload occurs and the breaker opens, it allows the reset button to “pop out” for visible trip indication.

The recommended mounting hole is 0.437" (7/16")

Features a recessed reset button which cannot be manually pulled out to disconnect the circuit

When an overload occurs and the breaker opens, it allows the reset button to “pop out” for visible trip indication

The recommended mounting hole is 0..437" (7/16")

Philmore circuit breakers are single pole, thermal circuit breakers that feature a recessed reset button which cannot be manually pulled out to disconnect the circuit

When an overload occurs and the breaker opens, it allows the reset button to “pop out” for visible trip indication

The recommended mounting hole is 0..437" (7/16")

Philmore circuit breakers are single pole, thermal circuit breakers that feature a recessed reset button which cannot be manually pulled out to disconnect the circuit

When an overload occurs and the breaker opens, it allows the reset button to “pop out” for visible trip indication

The recommended mounting hole is 0.437" (7/16")

Replace glass cartridge fuse holders without panel redesign

Easy to install

6.35mm terminals are plated and punched for quick connect or solder connections

3.5mm, 3-conductor stereo with solder terminals .

Includes two original Philmore jacks - made in Japan.

Chassis or panel mounting.

Philmore circuit breakers are single pole, thermal circuit breakers that feature a recessed reset button which cannot be manually pulled out to disconnect the circuit

When an overload occurs and the breaker opens, it allows the reset button to “pop out” for visible trip indication

The recommended mounting hole is 0.437" (7/16")

Use in coaxial cable feeds to reduce signal levels.

Fixes the problem of having too much signal strength.

Combinations of attenuators may be used together to create the exact signal loss needed.

Keystone jack to be used with white keystone wall plates or panels

Number of jacks: 4 total = 2 red ring and 2 black ring

Keystone Color: White / Off-White

Philmore circuit breakers are single pole, thermal circuit breakers that feature a recessed reset button which cannot be manually pulled out to disconnect the circuit.

When an overload occurs and the breaker opens, it allows the reset button to “pop out” for visible trip indication.

The recommended mounting hole is 0.437" (7/16")

Philmore circuit breakers are single pole, thermal circuit breakers that feature a recessed reset button which cannot be manually pulled out to disconnect the circuit

When an overload occurs and the breaker opens, it allows the reset button to “pop out” for visible trip indication

The recommended mounting hole is 0.437" (7/16")

Compact rocker switch is designed to snap in a 0.8" diameter opening.

Action: Low-Off-High.

Current rating: 10A-125VAC, 5A-250VAC.

White plastic insert easily snaps-in keystone wall plate.

3.5mm 4-pole connector with female connection on each side.

4-conductor for microphone and other devices.

Compare to Anderson / Sermos connectors

Designed for quick connecting or disconnecting of electronic equipment

Includes 4pcs - 1 red and 1 black housings with 2 75A contacts

 Splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals.

5-2050 MHz frequency Range.

Power passive to all ports.

Designed for insertion and extraction of crimp type pins for D-Subminiature connectors.

Tool body is made of plastic and ends are metal.

Tool is 4" long.

Splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals.

Completely sealed nickel plated zinc die cast housing.

5-2050 MHz frequency Range.

100A Main Lugs Load Center

Surface Mount

6 Space Circuit - 12 Single Poles

Wall Switch and Portable Remote 2 in 1: LoraTap remote switch can mount on the magnetic plate base (fixed with magnet or double sided tape on the back) or place directly on a magnetic surface like fridge and works as a traditional switch, or be taken off and used as a portable remote, which allows you to place it anywhere easy to reach

Compact Design & Easy to Use: Mini 3 prong grounded single port power adapter with on/off button, energy saving design, blue led light indicator, plug and play, just plug in the outlet socket, you can remotely control the device from anywhere in your house

Long Range Control: 915Mhz wireless signal strong enough to go through walls and windows, the control ranges up to 100ft/30m(indoor), 656ft(outdoor) without interfering other electronics, ideal for hard-to-reach lights or appliances that do not have a switch

UL Listed and Outdoor Rated

Elevated cover with padlock prevents unauthorized use

Receptacles protected by Siemens circuit breakers

50AMP

Water Proof

Splash & Dust Proof

20a Manual Reset Circuit Breaker

Combines switching and circuit protection into a single device;Manual Reset (Switchable)

Voltage : up to 32Vdc, use in 12vdc,14vdc, 24vdc system

Hi-Amp 150A Circuit Protector Breakes, Type 3 Manual Reset - Switchable

Meet S.A.E. J1625, J1171, UL1500 (Ignition Protected)

Housing is thermalplastic UL rated 94V0,IP67 Waterproof

Hi-Amp 30A Circuit Protector Breakes

Reset Type : T3--- Manual Reset Switchable

Voltage:Up to 48vdc ; 2,500A @ 14Vdc 1,500A @ 48Vdc

Compact and lightweight design,Meet S.A.E. J1625, J1171, UL1500 (Ignition Protected)

Surface Mount, protective stud insulator included

Hi-Amp 200A Circuit Protector Breakes,switch manual reset button