Best Qiz in 2026

【Compatible with】Our fuel rail and injector cover kit for jeep 1997-2004 4.0L models with inline 6 motors. Compatible with Jeep Wrangler 1997-2004, jeep Grand Cherokee1997-2004, Jeep TJ 1997-2004, and Jeep Cherokee 1997-2001. Note: Please check if it is suitable for your vehicle before purchasing.

【Function】About your vehicle often are at risk of heat related fuel system problems that can cause rough idle or slow starting. Our Fuel Rail & Injector Heat Shield Kit offers a two-fold benefit for your vehicle. Firstly, it reduces heat soak and keeps fuel cooler, leading to improved fuel efficiency and better engine performance. Secondly, protect fuel injectors from heat damage, allowing them to operate at optimal temperatures, resulting in smoother operation and enhanced engine performance.

【High Quality】The heat shield is made from a glass fiber-backed heat barrier with thick aluminum skin, our kit is built to last and withstand the rigors of daily use, meeting or exceeding OEM standards.

ID: 3/8inch (10mm),OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc.

INJECTOR REMOVAL TOOL: The ABN Diesel Fuel Injector Slide Puller is designed for removing stuck common-rail diesel injectors quickly and safely without dismantling the cylinder head for injector nozzle cars; The injector remover kit contains a 1.3-pound (.6 kg) shop hammer weight and M8, M12, M14 adapters

REPLACING OLD INJECTORS: Fuel injectors are important as they are what injects fuel directly into the cylinder, but because of their continuous use, they are prone to cracks, breaks, and minor physical wear; Symptoms of this issue can range from rough engine idle, slow acceleration, misfire, bad gas mileage, to gas leaks; This fuel injector tool helps to easily remove injectors for testing and cleaning as well as replacement

GREAT FOR BOSCH AND LUCAS INJECTORS: This kit includes a 7-inch (178 mm) bar and a 1.3 lb. (.6 kg) slap hammer weight along with M8, M12, M14 thread adapters; This injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors; Adaptors and slide hammer are stored in a convenient plastic box for storage and travel

Rapidly cleans diesel injectors, turbos, blocked DPFs and dirty EGR systems

Restores performance, improves fuel economy and results in smoother idling

One 12 oz bottle treats 40 gallons of diesel - use every 5,000 miles

1.5 feet of fuel injection hose designed specifically for auto and truck fuel injection systems

Can be used with gasoline, ethanol, extended gasoline, oxidized sour gas, diesel fuel, biodiesel (B5, B10, B20) and lubrication oil

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

Removes carbon deposits from key engine parts

Prevents future carbon buildup on port/indirect fuel injectors, intake valves, and ports

Maximizes engine performance and fuel economy

Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds;

Compatibility: Fit with 2001-2005 6.6L Chevy/GMC Duramax and for Dodge/Cummins 2003-2007 5.9L, for Bosch diesel common rail system, and other vehicles with a 14mm fuel line nut;

Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working;

Ideal replacement - this fuel injector sleeve is a direct replacement for the original equipment part on specified engines

Durable construction - this part is made from quality materials to resist damage from fuel and extreme temperatures

Cost-effective solution - offers original equipment quality at competitive price

ALLOSUN DIY Injector Cleaner adaptor kit is to easily clean almost all types of car motorcycle fuel injectors.

Package include two white tubes to fits two different size injectors.

The white tube adaptor is for connecting the injector nozzle and car cleaning liquid flush.

Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection.

Works with engine off and pulse timer may be used with fuel pressure gauge.

Large LED display/4 Pulse Modes. Test Lead: 41. 5cm / 16. 3 inches.

operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection.

works with engine off and pulse timer may be used with fuel pressure gauge.

large led display/4 pulse modes. test lead: 41.5cm / 16.3 inches.

Restores fuel economy

Stabilizes ethanol

Maximizes horsepower

High quality carrier of active ingredients

Safe for all gasoline engines

Unclogs dirty fuel injectors

A set of 8 fuel injector adpators for the 99 and up GM trucks

Please see the pictures of either end of the adaptor to make sure this is what you need.

Connects to the harness is for the Delphi Mini connector.

One 16 oz bottle of Killem

Treats 1280 Gallons

Controls Bacteria and Fungi Growth

[Capacity of the injector]: 1/4 oz/7.5ml---2oz/60ml.

[Feature]: inject oil/dye on low side with AC on, works great.Makes oil injecting into the R-134 R410a R22 R12 system a breeze.

[Instructions]: You can view the second image to use the product.Oil cylinder is filled with 2 ounces of refrigeration oil, check valve screwed onto cartridge and tightened. The inner and outer cylinders are tightened clockwise, and then a little 1/4 SAE threaded inner core is used to discharge a little air inside the blue tube. Connect the low-pressure port of the refrigeration system that needs to be refueled, and add the required amount of cooling oil to the inner and outer cylinders.

♛ HIGH QUALITY ---- High quality Zinc Plated Steel hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band.

♛ EASY To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw.

♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.

Product Type:Auto Part

Item Package Weight:0.48 Kilograms

Item Package Dimension:5.4 cm L X22.0 cm W X28.2 cm H

Product type :AUTO PART

Package dimensions :7.874 cm L x8.382 cm W x2.794 cm H

country of origin :United States

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

(Specifics) This is a 8PCS Set USCAR EV6 EV14 fuel injector connectors with TXL cross-linked wire pigtails.

(Compatibility) Fits Newer Fuel Injectors applied by LS2, LS3, LS7 Engines. Please Make Sure the Connector is the Same to your Original One before Purchase.

(Interchangeable Part #) EC264, WPT-159, 57-5361, 1P1580, 960, 712, PS38764, 1U2Z14S411BPA, 17400-08.

Professional, premium aftermarket replacement

Provides the performance and dependability you expect from ACDelco

Manufactured to meet expectations for fit, form, and function

☀【Package Include:】In this set, we provide 12pcs 14-16mm mini style fuel injection hose clamps, which diameter is 9/16''-5/8''.

☀【Durable Quality:】All the hose clamps are made of high quality 304 stainless steel, they have superior rust resistance and the excellent of oxidation resistance in a humid environment. They also strong and durable when installing on the tube, you will no longer worry about them rusting and breaking.

☀【Adjustable Style:】All the hose clamps with adjustable screws, you can adjust the size according to the diameter of the pipe, so you can install and remove them at any time with a socket wrench. The range of clamps shows the minimum and maximum sizes they can be adjusted.

【PREMIUM QUALITY】Fuel Injector Connector, made of high quality material for long lasting durability ,ensuring maximum performance and extended service life.Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping

【REPLACEMENT FUEL INJECTOR CONNECTOR】These are the cut and splice style, which is very easy to do, and better since you can choose the length of the plug and eliminate unnecessary electrical connections when using the plug and play style clips.

【REPLACES PART NUMBER】EV1-8

Please see the pictures with details above to make sure this is what you need.

Shipping from our USA warehouse, fast shipping and good service.

Includes all necessary parts and gaskets to perform a complete installation.

Ensures smooth engine operation, cleaner emissions, improved fuel economy, and increased performance.

Includes complete gasket set that kits from other manufacturers do not offer.

Aftermarket item, exactly same function as original

set of 8 USCAR EV6 EV14 fuel injector connectors with TXL cross-linked wire pigtails.

Fit many of the newer fuel injectors for the LS2, LS3, Ford, Dodge and many more.

【Size】 ID: 3/8" (10mm), OD: 2/3 " (17mm), Length: 10FT.

【Premium Material】 Premium nylon fiber wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.

【Strong and Durable】 Nylon Braided Fuel Hose Working Temperature Range: -40°F to +300°F, Maximum Working pressure: 290 PSI, Burst pressure: 1160 PSI. PROFESSIONAL OIL RESISTANT DN8MM 20BAR MAXIMUM W.P.

►Main Usage: As an adapter for DIY cleaning the fuel injector nozzle, removed the injector from the engine, it can be cleaned separately. When the injector is clogged, you can use it to save expensive nozzles.

►Compatibility: Universal fit any 12 - 24V car, motorcycle, electric car, ATV, Boat and so on.This DIY Injector Cleaner adaptor kit is easily to clean most car motorcycle fuel injectors.

►Working requirements: It needs the combination of 12V DC power supply and aerosol of Injector or carburetor cleaner ( not included ). Please prepare these necessary tools. No compressed air required.