Best Raco in 2026

Drawn construction of pre-galvanized steel

4 in. square, 2-1/8 in. deep

Supplied with eleven 1/2 in. and six 3/4 in. knockouts

Rugged metallic construction insures mechanical protection for the raceway

Corrosion resistant zinc die cast construction

NMSC Wire - (2) #14 - (2) #10, (3) #14, or (3) #12 with or without ground

DESIGNED FOR RESTORATIONS: Our Hubbell RACO RETRO-BRACE 1.5-in. Deep Ceiling Fan Box for Old Work is specially designed to accommodate older model fixtures so you can preserve original decor.

ADJUSTABLE FOR JOIST SPACING: Our old work electrical box is adjustable for limited joist room so you save on renovation. You can expand the brace from 16 to 24 inches in length without using tools.

STURDY SUPPORT: Enjoy strong, worry-free bracing for your ceiling fan or light fixture. Get solid anchorage for ceiling fans rated up to 70 lbs or for ceiling lights rated up to 110 lbs.

Drawn steel construction with raised ground screw area

4 in. x 1-1/2 in. deep

Supplied with four 1/2 in. and four 3/4 in. knockouts

Flat covers

Used to close an outlet box

Mount a device

Welded 4 in. square box for installing receptacles, switches or fixtures in walls or ceilings

Combination screw heads allow quick installation

UL Listed and acceptable in 2-hour fire rated walls

BUILT-IN VERSATILITY: Recessed duplex 15A TR device and adjustable steel box in brass finish. Safe and tamper-resistant 5A, 125V receptacle allows the plug to be concealed, especially for children. Can be used for power or data

INTELLIGENT DESIGN: Equipped with back and side knockouts for proper wiring access, whether for cable, plug, cord, USB, or ethernet. Protects electrical connection and prevents accidental disconnection

DESIGNED TO FIT YOUR SPACE: No unsightly plugs of different equipment on the surface of the floor as it also reduces plug protrusion. Features removable neoprene gaskets to allow for independent use of either side of the receptacle with the cover closed

BUILT-IN VERSATILITY: Recessed duplex 15A TR device and adjustable steel box in black finish. Safe and tamper resistant 5A, 125V receptacle allows plug to be concealed, especially for children. Can be used for power or data.

INTELLIGENT DESIGN: Equipped with back and side knockouts for proper wiring access, whether for cable, plug, cord, usb, or ethernet. Protects electrical connection and prevents accidental disconnection.

DESIGNED TO FIT YOUR SPACE: No unsightly plugs of different equipment on the surface of the floor as it also reduces plug protrusion. Features removable neoprene gaskets to allow for independent use of either side of the receptacle with the cover closed. Pre-assembled flange and cover for fast installation.

Square Exposed Work Cover

Exposed work covers

Mount switches

Positioned to accommodate 1-2 switch boxes

Combination screw heads allow quick installation

Drawn construction

BUILT-IN VERSATILITY: Recessed duplex 15A TR device and adjustable steel box in nickel finish. Safe and tamper resistant 5A, 125V receptacle allows plug to be concealed, especially for children. Can be used for power or data.

INTELLIGENT DESIGN: Equipped with back and side knockouts for proper wiring access, whether for cable, plug, cord, usb, or ethernet. Protects electrical connection and prevents accidental disconnection.

DESIGNED TO FIT YOUR SPACE: No unsightly plugs of different equipment on the surface of the floor as it also reduces plug protrusion. Features removable neoprene gaskets to allow for independent use of either side of the receptacle with the cover closed. Pre-assembled flange and cover for fast installation.

Device mounts to cover

Corners of cover are crushed to insure ground continuity when mounting on a box

6.5 cubic in. capacity

Constructed of pre-galvanized steel with "TS" side-mount bracket

4 in. x 2 in., 2-1/8 in. deep

With proper fitting can be used for conduit, NMSC, armored, metal clad, flex cable

Drawn steel construction with "TS" side-mount bracket

4 in. square, 2-1/8 in. deep

Set back 1/2 in. eliminating the need for a plaster ring

Square Exposed Work Cover

Exposed work covers

Mount switches

Square Exposed Work Cover

Exposed work covers

Mount switches

Square Exposed Work Cover

Exposed work covers

Mount switches

RACO Handy box covers are designed to match the contours of the box

Cover corners are rounded

All covers have captive screws

This are easy to use

This are highly durable

This is manufactured in China

Drawn construction with raised ground and "TS" side-mount bracket

4 in. x 2 in., 1-7/8 in. deep

Supplied with eight 1/2 in. knockouts

Rugged metallic construction insures mechanical protection for the raceway

Corrosion resistant zinc die cast construction

NMSC Wire - (3) #12, (3) #10, (2) #8

Used to cover two GFCI

Includes required hardware for mounting the receptacle

6.5cu. in. capacity

Gangable switch boxes offer the option of constructing a box to hold two or more devices

With proper fitting can be used for conduit, NMSC, armored, metal clad, flex cable

Supplied with eight 1/2 in. knockouts

Ideal for exposed work environments to support a variety of electrical devices

Made from heavy duty, 16-gauge, galvanized steel and come in 19 configurations to fit your needs

Square metallic cover for exposed work that includes driven screws and break-off lock nuts

Includes required hardware for mounting the receptacle(s)

RACO exposed work covers meet the requirements of the 2014 NEC Article 250.146(A). No bonding jumper is required for covers with: (1) Crushed corners

Hardware and cover are packed in a poly-bag with printed catalog number, compliances and installation instructions

Self-griping nmsc wire entry clamps are integral part of the box

Supports up to a 210 pound static light fixtures

Supports up to 70 pound ceiling fan

For use with Hubbell-raco 5511 floor box, gray

Cover design keeps debris out when receptacles are not in use

Covers are outfitted with duplex flaps that automatically close when not in use, preventing breakage and eliminating Trip hazard

With proper fitting can be used for nmsc, armored, metal clad, flex cable

Switch boxes are used to house wiring devices such as switches or receptacles

18.0Cu. In. Capacity

Use The Insider in dry locations to connect one or two runs of Nonmetallic Sheathed Cable (NMSC) to a box

The Insider and NMSC can be used with steel boxes, panel boxes or plastic boxes with knockouts

The only NMSC Connector that is UL tested for use with an eccentric knockout

Drawn construction of pre-galvanized steel

4 in. square, 2-1/8 in. deep

Supplied with seventeen 1/2 in. knockouts