Best Metal Electrical Boxes in 2026

ESSENTIAL KIT: Featuring our EBC-400 Single Gang Electrical Wall Box Cutter and our WTL-12 Wall Template & Level, the EBW-412 is perfect for installing single gang electrical wall boxes.

WTL-12: Has built-in levels and a rubber backing to allow you to position the template exactly where you need it

COMPATIBLE WITH: Carlon B114R & B12R single gang boxes, Carlon B225R double gang boxes, Carlon SC100RR low voltage plates, Arlington Industries LVL1 and LVL2 boxes, and many other brands of non-metallic single and double gang boxes

Durable high impact PVC construction

Can be used with 1/2 in. or 3/4 in. conduit

Includes 3/4 in. closure plugs and reducer bushings

Heavy duty 42 lb. mounting screws supplied

Mounts to wood or metal stud 25g

Extra thick PVC wall material creates stability and rigidity

Drawn steel construction with raised ground screw area

4 in. x 1-1/2 in. deep

Supplied with four 1/2 in. and four 3/4 in. knockouts

Made in the U.S.A

UL Listed, Weatherproof

Diecast aluminum alloy, Durable powdercoat finish, Corrosion resistant

Provide a junction for conduits or can house a single wired device such as a receptacle or switch

Weatherproof outlet box designed to house a two-gang switch or receptacle configuration in moisture-prone and outdoor locations; includes three 0.75” diameter threaded holes

Die-cast metal construction effectively seals out moisture, dust, debris, and insects to protect outdoor receptacles

Perfect for outdoor and moisture-prone applications, such as warehouses, pool houses, greenhouses, garages, restaurants, patios, and more!

120/240V Single Phase Panel Mount Surge Protective Device, 4-Mode Protection, 50kA Max Surge Current Rating, NEMA 1 Enclosure, UL 1449 4th Edition Type 2

Type 2 Single Phase Surge Panel with 4-Mode Protection

Real-time diagnostic visual indicator shows power and suppression status for each protected phase

Heavy duty 16 GA welded steel construction

Screwed on flat cover with key holes for easy assembly

Four wall mounting holes in back

10-in1 Patent-pending multi configuration design for use with a GFCI, Duplex, Switch or 1-1/4" Round Setup

Die cast metal construction with a weatherproof powdercoat finish

Easy to install, includes gasket and mounting hardware

Welded 4 in. square box for installing receptacles, switches or fixtures in walls or ceilings

Combination screw heads allow quick installation

UL Listed and acceptable in 2-hour fire rated walls

[PREMIUM QUALITY] TICONN electrical waterproof box is made from quality ABS plastic, which offers superb impact resistance and electrical insulation capability. Easy-to-operate door latches are made from 304 Stainless Steel

[IP67 GRADE] The electrical box offers complete protection against water and liquids, up to and including immersion in up to one meter of water. Great for high humidity environment.

[EASY TO MOUNT] The outdoor electrical box weatherproof comes with grid mounting plates that allow you to mount your board or device in the waterproof plastic box easily. A 3/8" NPT and a 1/2" NPT cable gland are included in case you need to feed wires outside. 4 stainless steel mounting brackets can be used to hang the box on walls or fences.

FOR REMODELS AND RENOVATION: Our Newhouse Hardware 1-Gang PVC Old Work Electrical Outlet Box is a plastic junction box that's designed to work with non-metallic sheathed cable for your electrical equipment.

VERSATILE ELECTRICAL BOX: Our single-gang electrical box fits a variety of remodeling needs. You can use it as an electrical junction box, switch box, GFCI box, or duplex receptacle outlet box.

IDEAL FOR HOME IMPROVEMENT: Get a durable old work box that's usable for a broad range of refits in your home. It's designed for most residential home improvement and light commercial electric needs.

Snap-on cover requires no tools or fasteners

Capacity for up to three telephone expansion boards and one passive video splitter

Multiple knock-outs on top, bottom and sides support 1" conduit and facilitate cable routing and entry

Blends with any décor or setting

Excellent for low voltage wiring

Tough durable scratch resistant finish can be overpainted with latex paint

Positioned to accommodate 1-2 switch boxes

Combination screw heads allow quick installation

Drawn construction

Superior commercial quality die-cast metal construction

Premium powder coat finish

Closure Plugs, Ground Screw and Mounting Hardware Included

Superior commercial quality die-cast metal construction

Premium powder coat finish provides maximum weatherability and scratch resistance

Closure plugs, mounting hardware, installation instructions, and ground screw included

Made in USA

Complete floodlight kit

Professional grade quality

Superior commercial quality die-cast metal construction

Premium powder coat finish provides maximum weatherability and scratch resistance

Internal hub threads comply with nema requirements and will accept all threaded fittings and threaded conduit

★[Multiple waterproof technology] high quality PC casing, silicone sealing ring, nylon elastic wiring port.

★[IP68 Waterproof] Compared with the old version, the waterproof rating is updated to IP68; Fireproof, dustproof and impact resistant, the updated product can be used in the sun or rain.

★[Easy to use]say goodbye to the way of fixing the traditional screwdriver, directly adopt the design of the terminal wrench, and press the push to complete the wiring. The wiring process is not only simpler but also firmer.

Integrated vertical and horizontal levels and center point location mark allow for quick and easy placement of the tracer

Saves time and labour

Bull's eye accuracy

Eliminates need for bonding jumper in grounded metal enclosure

Side in terminals accept up to number 10-solid wire or stranded wire and push in terminals accept number 14-solid wire

Black and Brass finish is impact-resistant thermoplastic face and back body is virtually unbreakable

TIME SAVING INSTALLATION - Terminal block is pre-wired for easy access, just insert the wires and tighten the screws

CONVENIENT – Low profile, stylish metal cover recesses into the floor when not in use reducing above floor height to ¼ inch. Press button to access

PROTECTION – Meets or exceeds UL 514A including scrub water test. IP 44 rated protection from ingress water spray from any direction when closed

FEATURES: Ciata Saf-T-Bar lets you install a Ceiling Fan or Light Fixture without having access to attic spaces, and provides secure attachment to a ceiling joist. To make installation easier, you can position the electrical box anywhere on the bar depending on the needs. Saf-T-Bar features a heavy duty, Metal Electric Box with wiring capacity of 15.5 cubic inches and dual mounting capability for light and heavy fans and fixtures and is ideal for new construction or where attic is accessible.

USES: Ciata Saf-T-Bar Design allows secure installation for new construction, or remodel applications with attic access can be used for installation of ceiling fans of any style and supports up to 70 pounds. Lighting fixtures and chandeliers can also be mounted using it, and Saf-T-Bar supports light fixtures up to 150 pounds on 16- inch centers and up to 50 pounds on 24-inch centers. Ciata Saf-T-Bar can be used for engineered truss application.

INSTALLATION FRIENDLY: Ciata Saf-T-Bar is specifically designed for engineered truss application, and the end brackets have a 90-degree angle lip for easy positioning, while the square tube adds strength to the design making it ideal for new construction and remodelling projects with attic access. Additionally, the bar also includes a Saf-T-Cap to protect bolts and wires during drywall installation and painting.

Allows you to correct setbacks and insulate devices with an easy install design

Eliminates the need to align device screws with extender holes, and then trying to find the holes in the box

Adjusts up to a 1-1/2" box extension for a flush mount and neat finish

【ETL Listed】: NEMA 14-50R receptacle 125V/250V, power up your RV and trailer at camping ground. It can be installed outdoors, and work with your motorhome, welder, etc.

【Enough Space】: There is enough space to close the lid while plugging in the cord even with a big handle. You can also adjust the box lid open position while installing the panel and connecting the power cord.

【Weatherproof】: Constructed of heavy-duty metal with powder coating, it is durable enough for withstanding the elements. Rubber gasket under “knockout panel” secures weather resistance for the internal wires and connections.

Hubbell Square Box 4 In. Eight 1/2 In. And Four 3/4 In. Knockouts 1-1/2 In. Deep

Boxes are installed in ceilings or walls for lighting fixtures

This is manufactured in United States

Heavy-Duty Toolbox Built to Last: Expertly crafted with grade one Polypropylene Plastic, which produces a lightweight and extremely durable toolbox. Designed with a fatigue-resistant lid for high impact strength and daily use. This high-quality plastic is also chemical resistant over a wide range of bases and acids to protect against daily wear and tear.

For Professional Handymen and DIY Users: Manufactured and developed for both professional handymen and DIY users. This toolbox is constructed to keep your electrical, automotive, or construction tools in one place for extreme organization, easy transportation, and safekeeping.

Spacious and Handy for Optimal Organization: Comes complete with two 5.5-inch organizers and removable dividers to help you organize and store tools with ease. The removable dividers allow for personalization so you can efficiently store multiple tools in a variety of ways that best suit your storage needs - or you can remove the dividers completely to create a greater space for your larger hammers, wrenches, sockets, or screwdrivers.

Product composition: 20A Tamper-Resistant Receptacle Outlet+ 3-Port RJ45+ steel box .Adding dampers makes the product open slowly and more elegantly. Stainless steel surface and white sockets.

Product Materials:The brass top cover is made of aluminum alloy, rustproof, weatherproof, waterproof gasket with IP44 waterproof rating, tamper-proof export, the bottom box is made of stainless steel, black paint, to play the role of antioxidant coating.

Product installation and use: it can be installed on concrete structures, floors, dining tables, marble countertops, kitchen countertops, beautiful and easy to use. Includes metal box with ears, it is glued to the bottom of the countertop with glue, or fixed with screws under the countertop.