Best Rhino Glue in 2026

Rhino Glue Gel, Heavy Duty 40 Gram Clear

Bonds in seconds plastics, vinyl, wood, rubber, metals, canvas, acrylics, ceramic, glass and more.

Clear Stress Tough formula for impacts, shock, moisture, heat and vibrations

Gorilla All Weather Waterproof Duct Tape is designed for outdoor repairs that need to stand up to extreme weather conditions with a permanent bond

Made with an incredibly strong, permanent, butyl adhesive and a weather resistant shell, this tape withstands even extreme weather conditions

Works in hot and cold temperatures with a service temperature range of -40° F to 200° F; Application temperature above 40° F

Plasticbonder: Is A Quick-Set, 2 Part, Urethane Adhesive System That Provides Strong, Lasting Repairs And Works On Thermoset, Carbon Fiber Composites, Thermoplastics, Coated Metals, Concrete & More.

Count On Us: For More Than 40 Years, Our Products Have Earned A Loyal Following From People Who Take Pride In Their Work. With Each Product We Innovate, We Continue To Provide The World'S Strongest Bond For Your Projects.

Simple To Use: J-B Plasticbonder Has A 1:1 Mixing Ratio, Sets In 15 Minutes And Can Be Sanded After 30 Minutes. With A Tensile Strength Of 3770 Psi, Plasticbonder Cures To A Hard, Permanent Bond.

PERMANENT PRO RESULTS: Permanently attaches side moldings, trim and emblems to the interior and exterior of vehicles

WEATHERABLE: High strength double-sided adhesive withstands weather and impact. Temperature use range is -40F to 250F

EASY TO USE: Cut, apply, press. That's it. No tools required. Avoid mess of liquid adhesives

PERMANENT: Creates a permanent bond that instantly seals out air, water, and moisture.

INDOOR / OUTDOOR USE: Gorilla Waterproof Patch & Seal tape works great on indoor and outdoors repairs and even under water.

EXTRA THICK: Has an extra thick adhesive layer and UV resistant backing.

J-B Weld Steelstik: A Hand Mixable Two Part Epoxy Putty Stick That Is Steel Reinforced & Non-Rusting To Quickly Repair Or Rebuild Anything Made Of Metal! J-B Weld Steelstik Is Certified By The Nsf And Is Safe For Contact With Potable Water

Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Steelstik Takes 5 Minutes To Set And Cures In 1 Hour. J-B Weld Steelstik Set And Cure Color Is Dark Grey

Product Features And Strength: J-B Weld Steelstik Has Lap Shear Strength Of 900 Psi, Can Withstand Continuous Temperatures Up To 350F (176C ) And Intermittent Temperatures Of 450F (232C), And Is Chemical Resistant Against Petroleum, Hydraulic Fluids And Other Chemicals When Fully Cured. Steelstik Can Be Molded, Shaped, Sanded, Drilled And Tapped

PROFESSIONAL GRADE: Recommended by many OEMs

TWO-PART EPOXY ADHESIVE: Provides extended work-time or rapidly cured with heat

EXCELLENT ADHESION: For use on a wide variety of plastic and metal substrates

PERMANENT: Creates a permanent bond that instantly seals out air, water, and moisture.

INDOOR / OUTDOOR USE: Gorilla Waterproof Patch & Seal tape works great on indoor and outdoors repairs and even under water.

EXTRA THICK: Has an extra thick adhesive layer and UV resistant backing.

PROFESSIONAL GRADE: Recommended by many OEMs

TWO-PART EPOXY ADHESIVE: Provides extended work-time or rapidly cured with heat

EXCELLENT ADHESION: For use on a wide variety of plastic and metal substrates

CURES FAST One-part adhesive sealant requires no mixing, typically cures in as little as 24 hours so you can get back on the water faster

SEALS ABOVE AND BELOW WATERLINE – Ideal for joints, rub-rails, access plates and other areas shielded from the sun

LONG LASTING FORMULA Tough polyurethane polymer resists weathering and salt water

Accelerates Body Repair: One of your body repair tools designed to speed up repairs

Body Fillers Addition: A necessary part of your car care kit for better hardening results

Finishing Putties Addition: Can be mixed with finishing putties to deliver a long-lasting repair

DURABLE YET FLEXIBLE: For automotive plastic panel repair and for matching OEM seam sealers

TWO-PART EPOXY: Adhesive is automatically metered for proper ratio

EASILY SANDABLE: Ready to sand in 15 minutes for a smooth finish without rework

Versatile Formula Repairs Scratches, Pinholes, Holes And Nicks.

Use During The Fill Stage Of The 3M Body Repair System

Can Be Used On Metal, Fiberglass And Wood As Well As Sanded And Primed Or Painted Surfaces.

[QUICK FIX] - The K Tool International Q bond adhesive comes with 2 Q bond adhesive bottles, 1 plastic adhesive powder and 1 metal adhesive powder. Adhesive forms to rock solid form within 10 secs after application.

[REINFORCING POWDER-PLASTIC] - The reinforcing plastic powder(black lid) is used most commonly for Bumpers, Grills, radiators and many more.

[REINFORCING POWDER-METAL] - The reinforcing metal powder is used most commonly for any aluminum adn metal surfaces along with grey plastics.

USE WITH Bondo Fiberglass Resin for strong waterproof repairs

USE TO REPAIR holes or cracks in fiberglass, wood and metal

CLOTH PATTERN provides reinforcement for a strong repair

Box of (25) ULTRA THIN - Body Filler/Glaze/Putty Spreaders

Very flexible with very sharp edge for precision application of fillers and glazes

Can be used for Acrylic and Epoxy Resin Pouring Art speading of Acyrlic paint and Epoxy

IDEAL FOR repairing rust-out and rust hole repairs

COVERS SMALL HOLES (up to ½”) without the need for backing strips, fiberglass resin or cloth

Bondo Glass Reinforced Filler formula is stronger than traditional lightweight filler

Two-part filler bonds to broad range of surfaces for permanent, non-shrink repairs

Cures fast; sandable in 15 minutes for fast same-day repairs

Light gray when mixed, helping blend with surfaces for consistent appearance

QUICKLY BONDS to primer, metal, fiberglass and aluminum

TWO-PART COMPONENT FORMULA delivers excellent durability and less shrinkage

QUICKLY REPAIRS scratches, minor dents, and stone chips

HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair

SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline

EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces

Fiberglass strands and fibers make it twice as strong as regular body filler

Covers small (up to ½”) holes without the need for backing strips, fiberglass resin or cloth

Excellent as a foundation for hole, dent and rust-out repair

HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair

SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline

EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces

VERSATILE FORMULA repairs scratches, pinholes, holes and nicks

CAN BE USED ON metal, fiberglass and wood as well as sanded and primed or painted surfaces

FEATURES 3-minute work time

100% WATERPROOF high-strength sealer for a range of repairs

SEAL CRACKS, REPAIR BREAKS and FILL HOLES

WATERPROOF SEAL. Strong, durable seal for concrete, showers or boats

DESIGNED SPECIFICALLY for spreading filler, putty, spackle, caulk or glaze

THREE SIZES in each pack ensures that you'll always have the right size filler spreader to create your best work in auto body repair

3-PACK features 3" X 4", 3" X 5", and 3" X 6" size spreaders

VERSATILE FORMULA repairs scratches, pinholes, holes and nicks

CAN BE USED ON metal, fiberglass and wood as well as sanded and primed or painted surfaces

Features 3-minute work time

Basic tools for better application of products

4”, 5” and 6” spreader pack ensures the right size for the job, improving efficiency and results

Flexible edge allows for easy and accurate spreading of fillers, caulks, glazes and putties

Long strands of chopped fiberglass deliver twice the strength of regular body filler

Fill holes up to 1” wide and rebuild missing pieces without backing strips, cloth or mat

Versatile filler works with fiberglass, metal and wood

✅ WHY CHOOSE POR-15 EPOXY PUTTY? This powerful epoxy putty is easy to use and dries Rock Hard. It’s strong enough to withstand drilling, taping, and painting, without cracking or shrinking. Perfect for repairing all types of fiberglass cracks, holes and breaks, repairing cracked metal, steering wheel crack repair, rust pits and holes, and beyond!

✅ ALL PURPOSE EPOXY PUTTY – Easy and effective– Simply knead and roll the two-part formula in your hands or a clean surface until the putty becomes one uniform color with no visible color streaks. Our putty responds well to water when smoothing, shaping, or molding. Work with it until it is almost perfectly smooth before it dries - eliminating most sanding!

✅ TOUGH, WATERPROOF, HEAT RESISTANT, - Our two-part industrial pliable metal filler formula mixes like clay and hardens like steel. The putty is waterproof, resistant to heat, cold, most fuels, and solvents or caustic agents. After curing the epoxy putty can be sanded, drilled, routed, screwed, chiseled, surfaced, tapped, sawn, turned, filed, carved, stained or painted.