Best Risetosun in 2026

(4) L-44649 Bearings - 1-1/16 Inch Inside Dimension

(4) - L-44610 Races - 1.98 Inch Outside Dimension

(2) - Grease Seals - 1.98 Outside Dimension / 1.25 Inside Dimension

4 sets of inner bearings and races L68149/L68111

4 sets of outer bearings and races L44649/L44610

4 pieces of double lip grease seals 10-19 (171255TB, 1.719'' I.D.)

4 Pieces LM-11949/10 Bearings -1-1/4 Inch Inside Dimension.

4 Pieces LM-11910 Bearings -1.7810 Inch Outside Dimension.

2 Pieces 84389TC Seal.

For use with 1.968 inches (49.99 mm) hub bore, Outer Bearing Cone: M - 12649, 07100, Outer Bearing Cup (race): M-12610, 07196, weight: 1.00 lbs

Prevents wheel bearing failure on boat, snowmobile, ATV, horse, RV and utility trailers

Grease level is shown with Auto Check feature - Eliminates bearing repacking

4 sets of inner bearings and races L68149/L68111

4 sets of outer bearings and races L44649/L44610

4 pieces of double lip grease seals 10-19 (171255TB, 1.719'' I.D.)

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

Cast galvanized wheel hub kit for boat trailers

Kit includes pre-greased bearings, seals, dust caps, lug nuts and a cotter pin

5 UHI lugs on a 4.5" bolt pattern

【WITH EXTRA 2 DUST CAPS & 4 SEALS】- You will receive 2 sets of 5x4.5'' trailer hubs(for 3,500 lbs axle) and all the hardware parts you will need, you don't have to go anywhere else to buy parts. Our kit also comes with extra 2pcs dust caps & 4pcs rubber plugs, can be used as spare parts in case of emergency. This is a value-for-money set!

【HEAVY DUTY & ANTI-RUST】- These hardware are made of high quality steel and rubber, strong and durable. Wheel hub surface with black coating, and dust cap surface zinc-plated, anti-corrosion & anti-rust, long-term service for your trailer.

【BOLT PATTERN】- 5 on 4.5'' bolt pattern idler hub with 1/2”-20 studs and bearing races installed.

4 inner bearings L68149 ID 1.378'' and 4 inner races L68111 OD 2.362'';

4 outer bearings L44649 ID 1.063'' and 4 outer races L44610 OD 1.980'';

4 double lip grease seals 10-19 (171255TB) 1.719'' x 2.565''.

L-44649 Bearing (1-1/16" inside dimension) x 4

L-44610 races (1.98" outside dimension) x 4

Grease seal x 2, Cotter pins x 2, Dust caps x 2

4-pack Grease Cap Plugs for EZ Lube Grease Caps

Rubber Lube plugs for 1.18" dust cap hole

Dexter EZ Lube Grease Cap

MODEL: Bearing Buddy 1980A (Chrome Version) / Protective Bra 19-B

SIZING: 1.980 inch (inside diameter of hub) See secondary photograph for measuring instructions.

CONTENTS: One Pair of 1980A Chrome Bearing Buddy(s) with auto check feature & Matching Protective Bra(s)

Inner Bearing Cone and Race L44643/L44610 x 2 Sets

Outer Bearing Cone and Race L44643/L44610 x 2 Sets

Double Lip Grease Seal 12192TB x 2 pieces

Kit Includes: (2) L-68149 1-3/8 Inch Inside Dimension INNER Bearings (2) L-44649 1-1/16 Inch Inside Dimension OUTER Bearings

(2) L-68111 Inner Race 2.362 Inch Outside Dimension (2) L-44610 Outer Race 1.98 Outside Dimension

(2) Grease Seals - 2.56 Inch Outside Dimension - 1.72 Inch Inside Dimension

Kit Includes : (4) L-44649 Bearings - 1-1/16 Inch Inside Dimension

(4) - L-44610 Races - 1.98 Inch Outside Dimension

(2) - Grease Seals - 1.98 Outside Dimension / 1.25 Inside Dimension

✔ Bearings - 100% Size inspection for optimum assembly.

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Double lips and spring to provide good sealing effect.

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

2 inner bearings L68149 ID 1.378'' and 2 inner races L68111 OD 2.362'';

2 outer bearings L44649 ID 1.063'' and 2 outer races L44610 OD 1.980'';

2 double lip grease seals 10-19 (171255TB) 1.719'' x 2.565''.

L-68149 1-3/8 Inch Inside Dimension x 2, L-44649 1-1/16 Inch Inside Dimension x 2

L-68111 Inner Race 2.362 Inch Outside Dimension x 2, L-44610 Outer Race 1.98 Outside Dimension x 2

Grease Seal x 2, Cotter pins x 2, Dust Cap x 2

Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts

Fits both 1" and 1-1/16" diameter straight spindles

Hub measures 4-1/4 inches tall (through center of hub)

GENUINE REPLACEMENT PART — Lippert helps you take the guesswork out of getting your trailer back on the road with exact-match replacement parts

MUTIPLE OPTIONS — Our trailer brake hubs are available in a variety of bolt patterns, axle ratings and sizes to fit your needs

DURABLE CONSTRUCTION — This industry-standard hub assembly is constructed from solid grey iron

Kit Includes (4) - L-44643 Bearings - 1 Inch Inside Dimension

(4) - L-44610 Races - 1.98 Inch Outside Dimension

(2) - Grease Seals - 1.98 Outside Dimension / 1.25 Inside Dimension

For use with BT8 spindles

Rubber, double lip design with steel construction

Dimension: 1.249'' x 1.983'' x 0.250''

Kit for Easy Boat Trailer Maintenance: Complete bearing kit with tools included for smooth boat trailer operation

Tools to Prolong Trailer Life: Replace worn bearings to extend the life of your boat trailer and accessories

Durable Parts for Marine Use: Designed for marine and boating use, perfect for fishing and recreational boats

Sufficient Wheel Replacements for You: you will receive 4 pieces of trailer hub caps with 4 pieces of rubber plugs, enough to meet your daily use or replacement, can be stored for a long term, and can be also shared with friends or relatives who have a trailer

Notable Size Details: our trailer axle grease cap measures about 1.98 inches in diameter, 1-7/16 inch high, and the rubber plug is about 1.5 x 1.5 x 0.2 inches, fit for 2,000 to 3,500 lb trailer wheel hubs

Quality Material Selection: our trailer bearing dust cap is made of iron, a galvanized surface, sturdy and tough, strong against breakage and deform, corrosion and rust, serving your trailer for a long time

Replacement bearing kit

Fits 3,500 lbs. capacity trailer axles

Includes every component needed to repack one axle hub

✔ Advantage - Rotating quiet and high speed, high quality chrome steel bearings are rugged and durable.

✔ Bearing - 100% dimensional tolerance, noise and vibration inspection, for optimal installation and performance.

✔ Fits for - Trailer axle hub wheel for 1-1/16'', L44649/L44610 x 4, 12192TB seal, cotter pin and dust cover x 2.

【HEAVY DUTY 】These dust caps are made of high quality carbon steel and rubber, surface zinc plated, strong and durable, not easy to deform, corrode or rust.

【WITH EXTRA 2 SEALS】 2 caps meet your daily use and extra 2 seals will be a reserve in case you get into trouble.

【DIMENSION】OD: 1.98 inch/ 50.4 mm.Please check the size information and compatibility carefully before placing an order.