Best Rochoof in 2026

【SUPER-THIN DESIGN】: 2.5-4.5 mm super-thin wrenches which let you reach the fastener in a tight gap. It is easier to use in a narrow space, giving you maximum torque without slippage.

【DURABLE CR-MO STEEL】: Each slim wrench is made of CR-MO steel, which is strong and has good toughness, not easy to break. The surface is mirror chrome plated, corrosion-resistant and rust-resistant. More durable, exceed ANSI standards.

【16-PIECE METRIC & SAE】: Including 7 x SAE: 1/4" x 9/32", 5/16" x 3/8", 11/32" x 13/32", 7/16" x 1/2",9/16" x 11/16", 3/4" x 13/16", 7/8" x 15/16"; 9 x Metric: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 21x23, 22x24mm. The specifications engraved on the wrench are clear and easy to identify.

【10-PIECE METRIC WRENCH SET】: Metric: 6, 8, 10, 11, 12, 13, 14, 15, 17, 19 MM. Widely used in all kinds of equipment, bicycle, electric vehicle, automobile, home and other installation and maintenance.

【HIGH-QULITY CR-V STEEL】: The combination wrenches are made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,anti-rust and anti-corrosion, effectively extending the service life.

【12-POINT & 72-TOOTH 】: The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. 72 teeth perfect precision with slim profile. Top-quality hand tools for every repair project.

【5-PIECE METRIC WRENCH SET】: Metric: 8, 10, 12, 14, 17 MM. Meet your daily work needs. Widely used in all kinds of equipment, bicycle, electric vehicle, automobile, home and other installation and maintenance.

【HIGH-QULITY CR-V STEEL】: The combination wrenches are made of chrome vanadium steel with stronger hardness after heat treated and provides higher torque.The surface is mirror chrome plated,anti-rust and anti-corrosion, effectively extending the service life.

【12-POINT & 72-TOOTH 】: The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. 72 teeth perfect precision with slim profile. Top-quality hand tools for every repair project.

【EXCELLENT MATERIAL】: ROCHOOF wrenches are made of heat-treated chrome vanadium steel, which is stronger and more durable. Mirror chrome plated surface anti-rust and anti-corrosion. Extend service life. Meets and exceeds ANSI standards.

【12-POINT】: The wrench combines open end wrench and box end wrench.12-Point box end doubles the access angle and contact points than 6-point. Fasteners are easier to access, stronger grip, and prevent skidding.

【UNIQUE DESIGN】: The 15° offset design at the ends more convenient to use, in line with ergonomics. The 12-point rounded corner design can better protect the fasteners from wear.

【EXCELLENT MATERIAL】: ROCHOOF combination wrenches are made of heat-treated chrome vanadium steel, which is stronger and more durable, not easy to wear. Surface mirror chrome plating, anti-rust and anti-corrosion. Extend service life. Meets and exceeds ANSI standards.

【12-POINT】: The wrench combines open end wrench and box end wrench.12-Point box end doubles the access angle and contact points than 6-point. Fasteners are easier to access, stronger grip. Prevents fastener slippage or wear

【UNIQUE DESIGN & MORE TORQUE】: The 15° offset design at the ends more convenient to use, in line with ergonomics. Raised panel wrench design provides more leverage and more torque for improved work efficiency.

【EXCELLENT MATERIAL】: ROCHOOF combination wrenches are made of heat-treated chrome vanadium steel, which is stronger and more durable, not easy to wear. Surface mirror chrome plating, anti-rust and anti-corrosion. Extend service life. Meets and exceeds ANSI standards.

【12-POINT】: The wrench combines open end wrench and box end wrench.12-Point box end doubles the access angle and contact points than 6-point. Fasteners are easier to access, stronger grip. Prevents fastener slippage or wear.

【UNIQUE DESIGN & MORE TORQUE】: The 15° offset design at the ends more convenient to use, in line with ergonomics. Raised panel wrench design provides more leverage and more torque for improved work efficiency.

PREMIUM - Precisely machined HEX & Torx sizes. Crafted and Designed with superior materials for increased torque and unmatched hardness.

DURABLE - Industrial grade, heat treated S2 alloy steel will increase turning power. Heavy-duty, will outperform the regular cr-v or common carbon materials.

LONGEVITY - Manganese Phosphate coating for rust and corrosion protection. Plus, the chamfered edges and ball end design will provide up to 25-degree angle entry.

Removable Power Tools Accessory Case

Quick Release, 72 Tooth Ratchet for high torque ratcheting

Durable anti-slip vinyl grip bit driver with maximum comfort.

PRECISE - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.

DURABLE - Reinforced ratchet gear head constructed from hardened, heat-treated Chrome Vanadium alloy steel.

LONGEVITY - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.

Includes 15-pc. combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Wrench holder

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

measurement_system

Extremely robust and durable

Suitable for 1/4" hex bits under DIN 3126-C 6,3 and E 6,3, ISO 1173 and Wera series 1 and 4, Wera Adaptor 870/1 for 1/4" sockets

Includes 15-pc. combination wrenches: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; Roll-up storage pouch

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Applications of this adjusting tool include Ducati 1098, 1198, Streetfighter-1098, Multistrada 1200, Monster 1200, 1199, Diavel and all other Single Sided Large Axle Swingarms

Use alone or with a 3/8"D wrench for the adjustment of the drive chain on motorcycles fitted with single sided swinging arms

Alternative to 88713.1038 or 887131038. Manufactured precisely to fit the eccentric spanner nut

CORROSION RESISTANCE: Full Polish Chrome Finish

QUICK ENGAGEMENT: 12 Point Box End with fastener

ADDITIONAL KNUCKLE CLEARANCE: 15° Box End Offset

Set Includes: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Individually tested to 10,000 volts AC and rated to 1,000 volts AC for safety and peace of mind

Black oxide finish for corrosion protection

LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.

CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.

RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.

Includes 8-pc. stubby combination wrenches: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in.; Wrench holder

Short length and a slim body make it easy to operate in areas with limited room

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

[VERSATILE]- Extra long, flexible and reversible making it the most versatile ratcheting wrench on the market

[90 TOOTH DESIGN]- This Mountain product comes with a patented 90 tooth design

[180 DEGREES] - The 180° rotating head on both ends of the wrench allows the ratchet wrench to flexibly bypass obstacles for easy use at any angle

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access

Solution to the extraneous rust problem: fasten stainless screws with stainless tools

Hex-plus allows hexagonal socket screws to live longer

Stainless l-keys prevent extraneous rust on stainless screws

Combination Wrench Set Comes with Lockable Stacking Cases

Stamped hashmark pattern on SAE combination wrench set handle provides added grip points.

Longer panel design gives more torque during use.

Includes 15-pc. inch combination wrenches: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; 15-pc. metric combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Roll-up storage pouches

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Long Pattern Length

Offset Box End for Increased Access

Surface Drive Plus on Open End: Stronger Grip, Reduces Fastener Rounding

CORROSION RESISTANT: The combination wrench has chrome finish for corrosion resistance

QUICK ENGAGEMENT: 12 point box end for quick engagement with fastener

KNUCKLE CLEARANCE: 15 degree box end offset for additional knuckle clearance

Product 1: 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs 30° for standard wrenches

Product 1: Off corner loading design on box end provides better grip and reduces fastener rounding

Product 1: Pass thru technology works down any length of threaded rod and long bolts

INDUSTRIAL GRADE - Forged from high-quality chrome vanadium steel, highly polished surface, the torque is over DIN3113 standard, overall hardness reaches HRC48, more durable, stronger and corrosion resistant.

12 SAE WRENCHES - 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"

PRECISION DESIGN - The 180 degree Flex-Head can perform precise repair work in any space. The 72-tooth ratchet gears need only a 5-degree working swing arc suitable for any narrow space. High torque to tighten or loosen any bolts without rounding.

INDUSTRIAL GRADE - Forged from high-quality chrome vanadium steel, highly polished surface, the torque is over DIN3113 standard, overall hardness reaches HRC48, more durable, stronger and corrosion resistant.

10 METRIC & 10 SAE WRENCHES - 6mm, 8mm, 10mm, 12mm,13mm, 14mm, 15mm, 16mm, 17mm, 18mm & 1/4‘’, 5/16‘’, 11/32‘’, 3/8‘’, 7/16‘’, 1/2‘’, 9/16‘’, 5/8‘’, 11/16‘’, 3/4‘’.

PRECISION DESIGN - The 72-tooth ratchet gears need only a 5-degree working swing arc suitable for any narrow space. High torque to tighten or loosen any bolts without rounding.

CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.

RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.

CHAMFERED OPENING: Quickly aligns fastener to socket.