Best Open End Wrenches in 2026

Includes 15-pc. combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Wrench holder

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

PATENTED DESIGN: Patented open-ended head allows easy access to connectors, nuts, and bolts

PRECISION TORQUE: Ratcheting box-end has 12 points of contact to provide maximum torque

CONVENIENT FUNCTIONS: Belt loop hole for convenient storage and transportation

Includes 8-pc. stubby combination wrenches: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in.; Wrench holder

Short length and a slim body make it easy to operate in areas with limited room

Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access

Combination Wrench Set Comes with Lockable Stacking Cases

Stamped hashmark pattern on SAE combination wrench set handle provides added grip points.

Longer panel design gives more torque during use.

6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

72-tooth ratchet gear needs only a 5-degree working swing arc

Box end head pivots 180 degrees to easily get around obstructions

6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

Super-thin ultra low profile wrenches let you reach fasteners in tight clearance. Just 4.6 mm thin and constructed of premium forged steel, these super-thin open end wrenches are truly versatile and are made to last

The wrench head is tipped at a 15-degree angle. Useful especially in narrow spots, after each 15-degree turn, flip the wrench over to quickly engage the fastener again

Premium Chrome Vanadium steel forged with a complete 10-step state of the art heat treatment process, constructed for serious professionals

Fully polished drop forged alloy steel

1-1/4-Inch jumbo crowfoot wrench

1/2-Inch drive

Our ultimate TightSpot wrench to work faster in small spaces: Our incredibly priced, 4 degree ratcheting movement is designed to access spots where standard wrenches will not have enough swing. The 90 teeth inside the 100% steel ratcheting box end will speeds you through jobs quickly with no need to lift. And without lifting, you stay glued to the fastener until the turning is done, even if you're reaching deep into a compartment or appliance.

Powerful 7 stage construction for lifelong reliability: Our secret is drop forging & heat treating our amazing steel alloy. Aerospace Grade Vanadium hardens our steel alloy even more, while chromium helps to prevent corrosion.

Reduce bolt rounding: The reinforced open end holds on tight to fasteners for reduced bolt rounding.

Acc. to DIN 894, ISO 3318

Jaw set at 15°

GEDORE vanadium steel 31CrV3

Superior strength from the specially formulated and heat-treated Crestoloy alloy steel construction

Black manganese phosphate finish for extreme corrosion resistance and smooth ground surfaces to reduce friction

Off-corner loading technology on the box-end reduces fastener rounding

Leading Manufacturer Of High-Quality Products

International Renown For Our Diverse Range Of Award-Winning Products

Fully Equipped With State-Of-The-Art Technology

Our ultimate TightSpot wrench to work faster in small spaces: Our incredibly priced, 4 degree ratcheting movement is designed to access spots where standard wrenches will not have enough swing. The 90 teeth inside the 100% steel ratcheting box end will speeds you through jobs quickly with no need to lift. And without lifting, you stay glued to the fastener until the turning is done, even if you're reaching deep into a compartment or appliance.

Powerful 7 stage construction for lifelong reliability: Our secret is drop forging & heat treating our amazing steel alloy. Aerospace Grade Vanadium hardens our steel alloy even more, while chromium helps to prevent corrosion.

Reduce bolt rounding: The reinforced open end holds on tight to fasteners for reduced bolt rounding.

Wrenches are made from durable chrome vanadium steel, additional mirror finish improves the corrosion resistance of the surface and effectively prolong the service life. DURATECH 8-Piece ratcheting combination wrench set makes emergency repairs a breeze.

72 teeth perfect precision with slim profile. The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. Top-quality hand tools for every repair project.

8-piece unbreakable Ratcheting Combination Wrench Set that exceeds ANSI standard includes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4". Standard measurements ensure that you have the right tool to tackle any screw or bolt.

Fully polished drop forged alloy steel

3/8 inch drive

Mounted on a convenient storage rail

They are crafted out of a Chrome Vanadium alloy steel with a mirror polish finish to help resist rust and corrosion. Stamped brand and “CHROME VANADIUM” letters on wrench handle provides added gripping points. Exceeds ANSI standards.

Open side lets the wrench fit onto automotive and plumbing tubing lines. The 15 degree offset at the ends makes it possible to reach tighter places. Size stamped on both sides for ease in identification. The wrenches that exceeds ANSI standard deliver a long time of solid performance. Designed to prevent rounding out edges over time.

3 piece high-quality flare nut wrench set includes the most popular sizes, which are the following: 10x12mm, 13x14mm, 15x17mm. Two sizes per wrench providing more options with less to carry.

QUALITY CONSTRUCTION: Heat treated Chrome Vanadium Steel and polished surface ensure durability and resistance to corrosion

5 DEGREE MINIMAL WORKING SWING - 72-tooth racheting 12 point box end allows efficient working with a 5 degree swing

SLIM PROFILE - slim profile design combined with the 15 degree angle on the open end makes working in narrow spaces possible

EXTRA LARGE SET: Set includes 14 jumbo size 1/2" shank crowfoot flare nut wrenches ranging in size from 1-1/16" to 2"

FOR HEAVY MACHINERY: Ideal for heavy maintenance on large equipment, the set can be used with any 1/2" drive ratchet, extension or torque wrench

GET TO HARD-TO-REACH PLACES: Fits into awkward and hard-to-reach spots where a regular wrench or socket won't do

Fully polished drop forged alloy steel

3/8 inch drive

Mounted on a convenient storage rail

HEAVY DUTY: This black oxide wrench set is drop forged, heat-treated carbon steel construction and withstands heavy duty operation providing high durability and extra strength. The perfect addition to a mechanics tool set.

DURABLE: The black oxide coated finish maximizes service life, upholding longevity with abrasion protection while resisting corrosion.

DESIGN: Combination double end set with a 12-point chamfered box and jumbo open end is designed for swifter movements, leverage, and tighter grip control when handling strong bolts.

Forged from special bar steel and heat-treated for long life

Each end has two different size openings

Small end has 5/8-Inch and 13/16-Inch openings; large end features 29/32-Inch and 1-3/32-Inch openings

High polish chrome finish with SUPERCOMBO Open End and SUPERTORQUE Box End

SUPERCOMBO open end has specially designed grooves that direct wrench force away from fastener corners. SUPERTORQUE box opening design allows application of higher torque without rounding or deforming hex fastner points

No contact is made at the corners of the hex fasteners

Includes 13-pc. ratcheting combination wrenches: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; Wrench holder

6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work

Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off

2.5 Degrees of arc swing

144 Ratcheting positions

Durable double-stacked pawls

Includes 11-pc. angle head wrenches: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in.; Black wrench holder

UNMATCHED ACCESS: Tekton’s 30/60 angle head wrenches save you precious time because you can continue work without disconnecting or dismantling equipment to access tight spots.

OPTIMIZED BEAM POSITION: The wrench beam is shifted out of your way to allow the greatest range of motion.

【CR-V STEEL】Made of heat-treated chrome vanadium steel to improve strength and durability, with polished and chrome plated finish to prevent rust and corrosion.

【72-TOOTH RATCHET】The ratcheting box end only needs a 5-degree swing arc to operate. Make it easy and convenient to deal with hard-to-reach areas.

【12-POINT BOX END】Provides a more precise and snugly fit and resists slipping off while you work.

Features and benefits: max bite & Trade

Open-end grip - 25% more torque

Comfortable I-beam handle design

Unmatched Access: Tekton’s 30/60 degree angle head wrenches save you time because you can continue work without disconnecting or dismantling equipment to access tight spots

Optimized Beam Position: The wrench beam is shifted out of your way to allow the greatest range of motion

Lean Outside Jaw: We put steel exactly where needed to withstand the forces generated throughout the jaw, resulting in the leanest possible shape