Best Rofu in 2026

Both Stainless Steel Faceplates

Frame Type - Hollow Metal, Aluminum or Wood

Reversible - Non Handed

REPLACE STANDARD LATCH AND STRIKES – The Defender Security U 10385 door strike is designed to replace the standard, separate latch and deadbolt strike plates with a one-piece combo plate.

MAXIMUM SECURITY STRIKE – This door strike provides maximum security! It comes with a one-piece combo plate plus six 3 in. long screws for maximum security. These longer screws allow for a strong hold, which helps prevent kick-ins.

TALLER LATCH AND BOLT OPENINGS – This door strike features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. hole centers.

New strike plate design for residential doors that no longer latch closed.

Easy to Install. No chiseling or grinding. Only a screwdriver needed.

Unique design provides additional vertical and horizontal latch space.

Six 3 in. long screws provided for maximum security.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

For doors with deadbolt and handle set on 5-1/2 in. to 6 in. hole centers

Provides maximum security

Material: Steel

Finish: Zinc Plated

Overall Size: 4-7/8"

Fail-secure operation - Door remains locked if power to the strike is lost

Includes Stainless Steel No-Cut and Silver-Colored Aluminum Low-Cut Strike Plates

Can be used with virtually any cylindrical door locking system

Zinc and Brass Plated Steel Security Box Strike and Face Plate

Fits standard size doors

Mortising required

SIZE : 2.25" x 2.25" overall length and width.

Finish Satin Nickel

EASY to install with just a screw driver require.

✅Field-selectable for fail-safe or fail-secure operation

✅2,200-lb (1000kg) Jaw strength, Tested to 500,000 cycles

✅Complete mounting hardware included, Screw terminals for ease of wiring

Fail secure, NO mode (Locked when power is removed)

This electric strikes with 4-27/32" faceplates are designed for use with mortise or cylindrical type lockset with up to 3/4" latchbolt projection without deadbolt

Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself. The electric strike must be positioned to accommodate offset mortise latches during installation

This door push bar is made of high quality iron material, which is durable and long service life.

The door will open faster based on convenient non-hand opening with large compression area.

Door Compatible & Lock - This push bar is suitable for door width between: 28"-50"(71-104cm), any metal or wood door acceptable. Also cuttable to suit small sized doors. To keep your safety, this panic bar adopts fire-proof lock and external lever, will do much help especially in emergency occasion.

CHOOSE BACKSET & HANDING

BACKSET: The distance between the edge of the door and Center of the key cylinder.

Features "Latch hold-back function" to allow ingress during business hours. Activated simply by holding in the latchbolt and turning the key the opposite direction until it clicks.

Used as an adjustable two piece door strike for a variety of swinging doors

Constructed from stamped steel and comes in a chrome plated finish

Designed to fit Roberts Redi-Frame and Timely steel jamb systems

✅Field-selectable for fail-safe or fail-secure operation

✅This strikes feature an ultra-compact design and adjustable stainless steel keepers with over 2,200lbs [1000kg] of holding force in fail secure mode. The strikes release electrically with up to 25 lbs of door preload. Single solenoid operates on 12VDC power. Provides electrical remote control, allowing door to open without actuation of the exit device.

✅Suitable for fire exit door with Push-rod lock.The operating principle of electric strike is that electromagnetism produces the force to pull or push the release lever so that to lock or open the door

Category: UNCATEGORIZED -- UNCATEGORIZED

Static strength 1,500 lbs, Dynamic strength 70 ft-lbs

Endurance 1 million cycles, Field selectable fail secure/fail safe

In-frame horizontal adjustment, Internally mounted solenoid

The 9600 was the first surface mounted electric strike designed with the strength and durability required to exceed the severe forces of ANSI Windstorm testing.

Designed to accommodate rim exit devices with a 3/4" [19mm] throw Pullman latch.

FRAME APPLICATION: Metal or Wood.

Deltana SPE225 2-1/4" x 1-3/4" Overall: 2-1/4" Extended Lip Strike Plate, Paint Black

Base Width: 2-1/4"

Lip Ext: 1-3/4"

HES 9400 Electric Strike slim line surface mounted solution. Works with rim exit devices up to 1/2" throw latchbolt.

All components are completely encased within its 1/2" thick stainless steel housing, so no cutting on the frame is required for installation.

An 1/8" spacer plate is provided to accommodate varying door gaps.

Certified Parts

Made with strong materials

Many parts are finish specific

KEEP YOUR BUSINESS SAFE! The Armored Loop 20" safely transfers electricity to alarmed exit doors.

UPGRADED DOOR SECURITY! Protect your business by electrifying exit doors to sound alarm system.

EASY INSTALLATION! Easy to follow installation instructions are included. Extra security and peace of mind!

Constructed of durable stamped steel

Comes in a beautiful, corrosion resistant, brass plated finish

Designed for use with door latch hardware on hinged swinging doors

Stainless steel bolt structure, structural linkage is made of steel and hardened to resist severe impact, sturdy and durable for use.

NO Mode: Fail-secure type, unlocked when power on, locked when power off, working with DC 12V, 14 to 131 Fahrenheit.

Provides 1,000-pound holding force, two contacts and no polarity requirement, can be opened by push button, remote control, etc (Not included).

Constructed of durable stamped steel

Comes in a beautiful, corrosion resistant, classic bronze plated finish

Designed for use with door latch hardware on hinged swinging doors

HES 5200 Electric Strike Works with cylindrical locksets up to a 3/4" throw latchbolt.

The Grade 1 solution with horizontal adjustability.

Plug-in connector and trim enhancer included. PoE friendly.

Brass automatic door holder and stop with a satin chrome plated finish holds door open while also preventing damage to walls

Wall-mounted strike has 2" projection

Meets ANSI/BHMA A156.16: L01291 specifications

Both Stainless Steel Faceplates

Frame Type - Hollow Metal, Aluminum or Wood

Reversible - Non Handed

【High Quality】 Made of high quality alloy metal material, the maximum impact resistance is 1000kg / 2200lbs after electrification, corrosion resistance, longer service time and higher efficiency.Voltage : DC12V.

【Accessories】 Package include mounting tabs*2, screws*4, diode*1, instruction*1

【Two Models】：You can set the operation mode of Fail Safe or Fail Secure. Just loose the screw and tighten it in the other hole.Fail Safe(NC):When power off,the door is in the open status.Fail Secure(NO):When power off,the door is in the closed status.

Commercial Door Hardware series

ANSI Strike Plate

4-7/8"